Forklifts

The New York Army National Guard has a requirement for 2 forklifts, to be delivered to locations specified in the attached solicitation.
Vendor to provide the following information
Forklift Price
Delivery Cost
Estimated Delivery Lead Time
Please note lead times in excess of 6 months will not be considered. All information specified must be included with the quote in order to be considered an eligible offer.
Basis of Award: Price and technical acceptability as specified on CLINS 0001 and 0002. Each line item will be evaluated individually and multiple awards to more than one offeror may be determined based upon the above mentioned evaluation.
All amendments will be posted to FBO including all soliciation clarifications. Vendor is responsible to check FBO for any updates to the solicitation prior to the closing date. Vendor must confirm reciept of all soliciation amendments.
This requirement is a HUBzone set-aside. In order to recieve an award, vendor must have a valid and active SAM registration.
Additional Clarifications:
-6000 lb lift capacity
POWERTRAIN
Engine - PSI 2.4L LPG
Brakes - Self Energizing Drum
Electronic Power shift 1 Speed Transmission
High Air Intake
Anti-Clog Radiator
Counterweight Rear Exhaust
Fixed LPG Bracket with Steel Strap
Pressure Sensing Low LPG Fuel Indicator
Single Pedal Inch/Brake Arrangement
Key Switch Start
Traction Speed Limiter pre-set to 8mph
Hydrostatic power steering

MAST / CARRIAGE / FORKS
3 Stage Full Free Lift Mast - Class III
81" (4618mm) Maximum Lift Height
87" (2195mm) Overall Lowered Height
59" (1519mm) Free Lift Height without Load Backrest
231" (5846mm) Overall Extended Height with Load Backrest
Mast Tilt - 6° Forward / 6° Back
48" (1220mm) High Load Backrest Extension
42" Class III Hook Type (2" x 4.9") Standard Tapered Forks
42" (1067mm) Wide - Class III - Hook Type Integral Sideshift
Carriage
Mechanical Lever Hydraulic Controls - Cowl Mounted
3 Function (1 Auxiliary) Hydraulic Control Valve
1 Auxiliary Function Hose Group - 2 Hoses Internally Mounted

WHEELS / TIRES
Drive Tires - 28 x 9-15 - Pneumatic Shaped Solid (PSS) - 2 Layer
Construction - Standard Tread Width
Steer Tires - 6.50 x 10 - Pneumatic Shaped Solid (PSS) - 2 Layer Construction

OPERATOR COMPARTMENT
Fire Extinguisher - 2.5 lb. Dry Chemical
Rear Drive Handle with Horn Button
88.5" (2250mm) Overhead Guard
Lever Shift Direction Control - Mounted on Left Hand Side of
Steering Column
Seat Belt - High-Visibility (Red) - No-Cinch with Emergency Locking
Retractor
Non-Suspension Vinyl Seat
Load Weight Display
Operator restraint system
Adjustable steer column
Steering Wheel with Integral Spinner Knob
Integrated Dashboard Display
Rubber/Non-slip floor mat

LIGHTS / ALARMS
Audible Alarm - Reverse Direction Activated - Self-Adjusting 82-102 dB(A)
Visible Alarm - Amber LED Strobe - Key switch Activated - Does Not
Increase Truck Height
Work Lights - LED Plastic Lens- 2 Front and 1 Rear - Rear
Combination Lights - LED - 2 Brake / Tail / Back-up Electronic Horn

OTHER
Integral Tie downs

WARRANTY
A Minimum of 12 Months / 2,000 Hours Manufacturer's Warranty, 36 Months / 6,000
Hours Powertrain Warranty

.

The New York Army National Guard has a requirement for 2 forklifts, to be delivered to locations specified in the attached solicitation.
Vendor to provide the following information
Forklift Price
Delivery Cost
Estimated Delivery Lead Time
Please note lead times in excess of 6 months will not be considered. All information specified must be included with the quote in order to be considered an eligible offer.
Basis of Award: Price and technical acceptability as specified on CLINS 0001 and 0002. Each line item will be evaluated individually and multiple awards to more than one offeror may be determined based upon the above mentioned evaluation.
All amendments will be posted to FBO including all soliciation clarifications. Vendor is responsible to check FBO for any updates to the solicitation prior to the closing date. Vendor must confirm reciept of all soliciation amendments.
This requirement is a HUBzone set-aside. In order to recieve an award, vendor must have a valid and active SAM registration.
Additional Clarifications:
Fuel: LP
. Travel speed.

The New York Army National Guard has a requirement for 2 forklifts, to be delivered to locations specified in the attached solicitation.
Vendor to provide the following information
Forklift Price
Delivery Cost
Estimated Delivery Lead Time
Please note lead times in excess of 6 months will not be considered. All information specified must be included with the quote in order to be considered an eligible offer.
Basis of Award: Price and technical acceptability as specified on CLINS 0001 and 0002. Each line item will be evaluated individually and multiple awards to more than one offeror may be determined based upon the above mentioned evaluation.
All amendments will be posted to FBO including all soliciation clarifications. Vendor is responsible to check FBO for any updates to the solicitation prior to the closing date. Vendor must confirm reciept of all soliciation amendments.
This requirement is a HUBzone set-aside. In order to recieve an award, vendor must have a valid and active SAM registration.
Additional Clarifications:
1. Do the forks have to go from the ground to a height of 14 feet and the max height of the truck 57 inches?
- Forks must move from ground to 14 feet at minimum
Max height of forklift vehicle:
- Needs to be 57 inches or less for maneuvering through spaces in shop

2. More information on the mast heights is needed.
Max fork height?
- Minimum 14 feet, no maximum requirement
Overall Collapsed mast height?

.

The New York Army National Guard has a requiremetn for 2 forklifts, to be delivered to locations specified in the attached solicitation.
Vendor to provide the following information
Forklift Price
Delivery Cost
Estimated Delivery Lead Time
Please note lead times in excess of 6 months will not be considered. All information specified must be included with the quote in order to be considered an eligible offer.
Basis of Award: Price and technical acceptability as specified on CLINS 0001 and 0002. Each line item will be evaluated individually and multiple awards to more than one offeror may be determined based upon the above mentioned evaluation.
All amendments will be posted to FBO including all soliciation clarifications. Vendor is responsible to check FBO for any updates to the solicitation prior to the closing date. Vendor must confirm reciept of all soliciation amendments.
This requirement is a HUBzone set-aside. In order to recieve an award, vendor must have a valid and active SAM registration.

.