Flange Mounted Magnetron

SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions.

SLAC has a requirement for a U.S. domestic end item source of the following products from PVD Products:

1. Quantity: 2, J0411318-03:  Flange Mounted Magnetron with Motorized Z-Motion
   1. A PVD Products 2” Titan Magnetron will be flange mounted with a pneumatic shutter assembly.
   2. The magnetron mother flange will fit directly onto a motor driven Z-stage with 3” of stroke.
   3. Will fit directly into the PLD/MBE 2300 system at Stanford.
   4. Includes one Cu gasket for making the vacuum seal.
   5. Magnetron designed for non-magnetic metals for DC sputtering.
   6. Handles non-magnetic targets 2” OD x ¼” thick.
   7. Requires selection of an RF or DC power supply noted below.
   8. Software upgrade to include control of the DC or RF power supply and shutter assembly.
   9. Note: This magnetron will be able to be inserted into the chamber via the Z-stage for short target-to-substrate  distances via a manual actuator. This will reduce the magnetrons effect on the RHEED system.
2. Quantity: 1, J0411271-12:  300-Watt RF Power Supply with Auto Tuner
   1.  A Seren 300-watt RF power supply with auto tuner and all necessary cables will be provided.
   2. 12’ RF cable from PS to match and 3’ RF Cable from match to magnetron.
   3. Bracket to support matching network.
   4. Will fit existing rack space.
   5. Software provided to operate power supply when required.
3. Quantity: 1, J0411202-12:  500-Watt DC Power Supply
   1. A HVC %00-watt DC power supply and 12’ cable will be provided.
   2. Will fit existing rack space.
   3. Software provided to operate power supply when required.

The award will be made based upon the Lowest Price Technically Acceptable method.

Marking of Proprietary/Confidential Information. Offerors shall properly mark and identify with a restrictive legend or information markings on pages of the proposal that contain Proprietary/confidential information.

For Offeror to be eligible for a subcontract award with the University and the U.S. Department of Energy (DOE), Offeror shall be registered with the System for Award Management (SAM). Entities may register at no cost directly at the SAM website: https://www.sam.gov.

Please quote GSA or ICPT pricing, if available.

The resulting purchase order shall be performed in accordance with SLAC National Accelerator Laboratory's Terms and Conditions for Fixed Price Commercial Supplies and Services dated December 2016

NOTE: The following documents are attached in this solicitation.

1. Buy American Act Certificate
2. Representations and Certifications Rider
3. Terms & Conditions for Fixed Price Commercial Supplies and Services, December 2016

Please provide quoted price, delivery, technical compliance statement and certification to the attention of Angela Garcia.

Payment Terms: Net 30 days
Freight terms: FOB Destination Prepaid and Add