Family of Medium Tactical Vehicles - Market Survey

Market Survey
Family of Medium Tactical Vehicles (FMTV)

1. Family of Medium Tactical Vehicles. The Product Manager, Medium Tactical Vehicles (PM MTV) located at the United States Army TACOM Life Cycle Management Command (LCMC) in Warren, Michigan is seeking to identify sources capable of manufacturing the existing designed vehicles with modernization Engineering Change Proposals (ECP) and provide System Technical Support (STS) and Maintenance Technical Representative (MTR) support for the follow-on acquisition of Family of Medium Tactical Vehicles (FMTV) consisting of 2½ & 5 ton trucks and trailers. The vehicles should possess capabilities that meet the requirements specified in the Army Technical Purchase Description (ATPD) 2131, Rev U and Technical Drawing Packages for the following variants:


Variant NSN Vehicle Description
M1078A1P2 2320-01-549-8577 LMTV Cargo
M1078A1P2 2320-01-549-8611 LMTV Cargo with winch
M1079A1P2 2320-01-552-7745 LMTV Van
M1079A1P2 2320-01-552-7749 LMTV Van with winch
M1080A1P2 2320-01-552-7791 LMTV Chassis
M1082 2320-01-449-1775 Trailer, LMTV Cargo
M1083A1P2 2320-01-549-8610 MTV Cargo
M1083A1P2 2320-01-549-8565 MTV Cargo with winch
M1084A1P2 2320-01-552-7739 MTV Cargo with Mine Handling Equipment (MHE)
M1084A1P2/RSV 2320-01-552-7767 MTV Cargo with MHE* (HIMARS RSV)
M1085A1P2 2320-01-552-7773 MTV Cargo, Long Wheel Base (LWB)
M1085A1P2 2320-01-552-7770 MTV LWB Cargo with winch
M1085A1P2 2320-01-552-7770 MTV LWB Cargo w/ Sideboard Delete
M1086A1P2 2320-01-552-7780 MTV LWB Cargo with MHE
M1086A1P2 2320-01-552-7776 MTV LWB Cargo with MHE & winch
M1087A1P2 2320-01-552-7781 MTV Expansible Van
M1088A1P2 2320-01-552-7759 MTV Tractor
M1088A1P2 2320-01-552-7753 MTV Tractor with winch
M1089A1P2 2320-01-595-3994 MTV Wrecker
M1092A1P2 2320-01-552-7793 MTV Chassis
M1095 2320-01-449-1776 Trailer, MTV Cargo
M1096A1P2 2320-01-552-7796 MTV LWB Chassis
M1147 2320-01-508-7887 LHS Trailer
M1148A1P2 2320-01-557-4546 LHS Truck
M1157A1P2 2320-01-552-7787 10 Ton Dump
M1157A1P2 2320-01-552-7782 10 Ton Dump with winch
M1273A1P2 2320-01-621-6239 MTV 10 Ton Chassis

The Government intends to integrate ECPs into the A1P2 as a modernization effort to restore lost capability and allow capacity for integration of new technologies. The MTV ECP efforts will:
a. Integrate higher capacity suspension, wheels, and tires.
b. Integrate underbody protection.
c. Increase engine power.
d. Integrate higher capacity alternator.
e. Integrate data bus upgrade.
f. Integrate safety enhancements (Electronic Stability Control)

The result of the A1P2 modernization effort will be an A2P2 version of the MTV and an updated revision of ATPD.

** The FMTV Technical Data Package, Army Technical Purchase Description (ATPD) 2131, Rev U and The FMTV Long Term Armor Strategy (LTAS) Technical Manuals are "For Official Use Only." All documents are marked Distribution D - Export Controlled. The Government will provide these Attachments separately via requests through FedBizOps. 

The interested party must submit a signed Non-Disclosure Agreement (NDA) via email to the Government Point of Contact before approval will be granted. The NDA is attached to this announcement. Upon submission of the NDA, the interested party will need to request access to the Attachments through https://www.fbo.gov/fedteds/W56HZV14R0024. Upon approval, access to the ATPD and LTAS Tech Manuals are available online. The Government will mail out the FMTV TDP via CD.

2. Market Survey Request. This market survey seeks to determine industry capability to provide 2½ and 5-Ton trucks and trailers, including STS and MTR support beginning mid-year FY17. The changes in the commercial marketplace for tactical vehicles over the past six years have prompted the need to publish this market survey. If interested, furnish your detailed responses to this market survey questionnaire. Provide any supplemental information or commercial literature describing the human factors, engineering, safety, supportability, quality, cost, product availability or other information not specifically requested that supports your response. The Government does NOT wish to obtain any proprietary or otherwise protected documents resulting from this market survey. The Government may return such data or documents submitted that have proprietary or protected markings. The intent of this market research process is to obtain only commercially available information about contractor's products.

All portions of these enclosures are merely for market research purposes, subject to change at any time, are in no way binding on the Government and do not represent an established requirement. The furnished enclosures are for information purposes only with the understanding that the Government is under no obligation of any kind to proceed with an acquisition in any way related to or based upon the data set forth in these enclosures. The information contained in this survey is not a basis to seek payment, reimbursement or other consideration from the Government. Moreover, the intention of this survey is not to solicit any proposals from Industry.

3. Responses. Responses to this market research survey questionnaire, comments to the purchase description, as well as industry questions should be sent via e-mail to the Contracting Officer, Mr. Timothy Nichols, timothy.a.nichols1.civ@mail.mil with a copy furnished to Contract Specialist, Mr. Marc Aldwin Landoy at marcaldwin.m.landoy.civ@mail.mil.

Response Format. Electronic responses are required. The maximum size of each e-mail message should be no more than three and one-half (3.5) megabytes. You may use multiple e-mail messages. The subject line must include the message number, (example: 1 of 3, 2 of 3, 3 of 3), and "[Firm's Name] response to FMTV". All interested firms, regardless of size, are encouraged to respond to this request for information. Reference http://contracting.tacom.army.mil/acqinfo/ebidnotice.htm for electronic submission details.

Responses Due. Replies to this questionnaire must be received by 5:00 PM Eastern Daylight Time (EDT) on 8 January 2016.

5. Market Survey Questionnaire. The below questions are intended to provide a snapshot of your capabilities to supply the FMTVs together with the logistics, engineering and support requirements.

MARKET RESEARCH SURVEY QUESTIONNAIRE
Family of Medium Tactical Vehicles

Company Identification:

Company Name: ________________________________________________________

Mailing Address: _________________________________________________________

_______________________________________________________________________

Company website: ________________________________________________________

Commercial and Government Entity Code (CAGE): ______________________________

Data Universal Numbering System Number (DUNS): _____________________________

North American Industry Classification System (NAICS): __________________________

Location of Facilities: ______________________________________________________

Business Size and eligibility under U.S. Government socio-economic programs and preference (i.e. type of business - large, small, small-disadvantaged, women-owned, veteran-owned, or 8(a)): ___________________________________________________

If your company is a small business, is the company compliant In Accordance With FAR 52.219-14, Limitations on Subcontracting: _____________________________________

Is your company located in a labor surplus area or a HUB Zone: ____________________

Does your company utilize a Defense Contract Audit Agency (DCAA) certified cost system: _______________________________________________________________________

Point of Contact (POC) Identification:

Name: _________________________________________________________________

Title: ___________________________________________________________________

Telephone Number: _______________________________________________________

Fax Number: _____________________________________________________________

E-Mail Address: ___________________________________________________________

Alternate POC: _________________________________________________________

Alternate POC Title: _____________________________________________________

Alternate POC Telephone Number: _________________________________________

Alternate POC Fax Number: _______________________________________________

Alternate POC E-Mail Address: _____________________________________________

Business Profile:

1. What products/services does your company primarily manufacture? Please list the names and/or identifying numbers of the specific trucks and trailers you are describing in response to this questionnaire.

2. How long has your company been in business?

3. What business type is your company (large, small, small-disadvantaged, women-owned or 8(a)? Is your company located in a labor surplus or HUB-zone (See FAR Part 19 -Small Business Programs)?

4. List your North American Industry Classification System (NAICS) Codes, Commercial and Government Entity (CAGE) Code and Data Universal Numbering System (DUNS) number.

Past Performance:

5. What experience does your company have in military tactical wheeled vehicle production?

6. Are your described trucks and trailers bought and sold commercially? If so, how many years have they been on the market?

Programmatic:

7. Please provide a detailed explanation (including preferences) of the extent to which contract type/structure (i.e. multi-year contract, requirements contract with options, Indefinite- Delivery/Indefinite Quantity contract with options) and contract length (3 vs. 5 years) influence your interest in participating in an RFP for this requirement?

Logistics:

8. Describe your Integrated Logistics Support program including personnel and maintenance training, provisioning, technical manual development, and fleet management.

9. What is your experience with Army repair parts provisioning and developing Army formatted Interactive Electronic Technical Manuals (IETMs)?

10. What are the customary practices of your company with regard to packaging, warranty, discounts, etc. under which your company makes commercial sales of this product?

11. What are your capabilities to deliver Department of the Army (DA) authenticated manuals prior to Full Material release?

Production Capability:

12. Would a sub-contractor produce some or all of the vehicles? Please elaborate.

13. The truck variants with the "P2" suffix in the model number are required to have armor protection that affords a degree of ballistic protection to be determined by the Government for the operator and passenger. The ballistics protection to be installed on production vehicles includes armor parts determined to be hard to install after production and permanent mounting provisions designed to accept armor components installed as necessary in the field. Please describe the experience/capability you possess in this area and how does this armor assembly requirement otherwise impact your production capability?

14. What is the minimum/maximum quantity you can produce during the "First" year vehicle call-up?

15. What is the minimum/maximum monthly production rate for FMTV orders following the "First" year vehicle call-up?

16. What is the production lead-time to deliver test vehicles after contract award?

17. What is the capability to produce the variants listed on pages one and two of the survey in an A2P2 configuration?

18. With your current facilities, what is your maximum (surge) production rate?

19. How long will it take from contract award to establish a vendor base, order hardware and deliver the First Article Test vehicles?

20. Has your company produced a FMTV (or similar) for either commercial or military application? If so, for whom? When?

21. Has your company produced a FMTV that meets the requirements of an ATPD? If your product does not meet the requirements of ATPD 2131U which requirements of ATPD 2131U does your vehicle not meet?

22. Has your company's product been tested in accordance with any standardized test methods such as those from the American Society of Testing and Materials (ASTM) or the Society of Automotive Engineers (SAE)? If yes, which tests were conducted? When? If not, has this vehicle been tested using an internal company standard? If yes, please briefly describe the testing method(s) used and provide any details about the test results that your company would like to share.

Engineering:

23. Does your company have the capability to submit data/drawings via electronic/digital data media? Can your company provide data through a web-based Advanced Collaborative Environment (ACE) such as FedBizOps? If yes, what hardware and software do you use?
24. What types of modeling and simulation data are available for the products you offer (i.e. CAD, dynamics model, etc)? What formats is this data available in?

25. What is your process for implementing engineering changes and drawing changes into production? Does your company have experience/capability to use Creo Parametric software (formerly Pro/Engineering) software?

26. What security clearances does your company have?

27. Is your company capable of providing RAM-D data?

Service Support:

28. How do you support your current products?

29. Describe your dealership maintenance capabilities.

30. Do you have any dealerships located Outside Continent of United States (OCONUS)? If so, where are they located?

Purchase Description:

31. In describing your capability to provide the vehicles described by the attached Purchase Description, your comments are welcome for any Purchase Description paragraph requirement (with paragraph specified).

32. Please add any additional comments:

NOTE: The Government is not asking you to develop or provide drawings or develop any technical data in response to this market survey.

Please send your completed survey questionnaire to Mr. Timothy A. Nichols at timothy.a.nichols1.civ@mail.mil. Companies responding to this survey are required to submit electronic responses in accordance with paragraph 3 of this survey.

Direct questions regarding the market survey to Mr. Timothy A. Nichols at timothy.a.nichols1.civ@mail.mil or (586) 282-8608. Alternate POC is Marc Aldwin Landoy, marcaldwin.m.landoy.civ@mail.mil, (586) 282-8731.

 

Market Survey
Family of Medium Tactical Vehicles (FMTV)

1. Family of Medium Tactical Vehicles. The Product Manager, Medium Tactical Vehicles (PM MTV) located at the United States Army TACOM Life Cycle Management Command (LCMC) in Warren, Michigan is seeking to identify sources capable of manufacturing the existing designed vehicles with modernization Engineering Change Proposals (ECP) and provide System Technical Support (STS) and Maintenance Technical Representative (MTR) support for the follow-on acquisition of Family of Medium Tactical Vehicles (FMTV) consisting of 2½ & 5 ton trucks and trailers. The vehicles should possess capabilities that meet the requirements specified in the Army Technical Purchase Description (ATPD) 2131, Rev U and Technical Drawing Packages for the following variants:
Variant NSN Vehicle Description
M1078A1P2 2320-01-549-8577 LMTV Cargo
M1078A1P2 2320-01-549-8611 LMTV Cargo with winch
M1079A1P2 2320-01-552-7745 LMTV Van
M1079A1P2 2320-01-552-7749 LMTV Van with winch
M1080A1P2 2320-01-552-7791 LMTV Chassis
M1082 2320-01-449-1775 Trailer, LMTV Cargo
M1083A1P2 2320-01-549-8610 MTV Cargo
M1083A1P2 2320-01-549-8565 MTV Cargo with winch
M1084A1P2 2320-01-552-7739 MTV Cargo with Mine Handling Equipment (MHE)
M1084A1P2/RSV 2320-01-552-7767 MTV Cargo with MHE* (HIMARS RSV)
M1085A1P2 2320-01-552-7773 MTV Cargo, Long Wheel Base (LWB)
M1085A1P2 2320-01-552-7770 MTV LWB Cargo with winch
M1085A1P2 2320-01-552-7770 MTV LWB Cargo w/ Sideboard Delete
M1086A1P2 2320-01-552-7780 MTV LWB Cargo with MHE
M1086A1P2 2320-01-552-7776 MTV LWB Cargo with MHE & winch
M1087A1P2 2320-01-552-7781 MTV Expansible Van
M1088A1P2 2320-01-552-7759 MTV Tractor
M1088A1P2 2320-01-552-7753 MTV Tractor with winch
M1089A1P2 2320-01-595-3994 MTV Wrecker
M1092A1P2 2320-01-552-7793 MTV Chassis
M1095 2320-01-449-1776 Trailer, MTV Cargo
M1096A1P2 2320-01-552-7796 MTV LWB Chassis
M1147 2320-01-508-7887 LHS Trailer
M1148A1P2 2320-01-557-4546 LHS Truck
M1157A1P2 2320-01-552-7787 10 Ton Dump
M1157A1P2 2320-01-552-7782 10 Ton Dump with winch
M1273A1P2 2320-01-621-6239 MTV 10 Ton Chassis
The Government intends to integrate ECPs into the A1P2 as a modernization effort to restore lost capability and allow capacity for integration of new technologies. The MTV ECP efforts will:
a. Integrate higher capacity suspension, wheels, and tires.
b. Integrate underbody protection.
c. Increase engine power.
d. Integrate higher capacity alternator.
e. Integrate data bus upgrade.
f. Integrate safety enhancements (Electronic Stability Control)

The result of the A1P2 modernization effort will be an A2P2 version of the MTV and an updated revision of ATPD.

** The FMTV Technical Data Package, Army Technical Purchase Description (ATPD) 2131, Rev U and The FMTV Long Term Armor Strategy (LTAS) Technical Manuals are "For Official Use Only." All documents are marked Distribution D - Export Controlled. The Government will provide these Attachments separately via requests through FedBizOps. Interested parties can request access via: https://www.fbo.gov/fedteds/W56HZV16R0024. The interested party must submit a signed Non-Disclosure Agreement (NDA) upon request of this information via email to the Government Point of Contact before approval will be granted. The NDA is attached to this announcement.

2. Market Survey Request. This market survey seeks to determine industry capability to provide 2½ and 5-Ton trucks and trailers, including STS and MTR support beginning mid-year FY17. The changes in the commercial marketplace for tactical vehicles over the past six years have prompted the need to publish this market survey. If interested, furnish your detailed responses to this market survey questionnaire. Provide any supplemental information or commercial literature describing the human factors, engineering, safety, supportability, quality, cost, product availability or other information not specifically requested that supports your response. The Government does NOT wish to obtain any proprietary or otherwise protected documents resulting from this market survey. The Government may return such data or documents submitted that have proprietary or protected markings. The intent of this market research process is to obtain only commercially available information about contractor's products.

All portions of these enclosures are merely for market research purposes, subject to change at any time, are in no way binding on the Government and do not represent an established requirement. The furnished enclosures are for information purposes only with the understanding that the Government is under no obligation of any kind to proceed with an acquisition in any way related to or based upon the data set forth in these enclosures. The information contained in this survey is not a basis to seek payment, reimbursement or other consideration from the Government. Moreover, the intention of this survey is not to solicit any proposals from Industry.

3. Responses. Responses to this market research survey questionnaire, comments to the purchase description, as well as industry questions should be sent via e-mail to the Contracting Officer, Mr. Timothy Nichols, timothy.a.nichols1.civ@mail.mil with a copy furnished to Contract Specialist, Mr. Marc Aldwin Landoy at marcaldwin.m.landoy.civ@mail.mil.

Response Format. Electronic responses are required. The maximum size of each e-mail message should be no more than three and one-half (3.5) megabytes. You may use multiple e-mail messages. The subject line must include the message number, (example: 1 of 3, 2 of 3, 3 of 3), and "[Firm's Name] response to FMTV". All interested firms, regardless of size, are encouraged to respond to this request for information. Reference http://contracting.tacom.army.mil/acqinfo/ebidnotice.htm for electronic submission details.
Responses Due. Replies to this questionnaire must be received by 5:00 PM Eastern Daylight Time (EDT) on 28 December 2015.

5. Market Survey Questionnaire. The below questions are intended to provide a snapshot of your capabilities to supply the FMTVs together with the logistics, engineering and support requirements.

MARKET RESEARCH SURVEY QUESTIONNAIRE
Family of Medium Tactical Vehicles

Company Identification:

Company Name: ________________________________________________________

Mailing Address: _________________________________________________________

_______________________________________________________________________
Company website: ________________________________________________________

Commercial and Government Entity Code (CAGE): ______________________________

Data Universal Numbering System Number (DUNS): _____________________________

North American Industry Classification System (NAICS): __________________________

Location of Facilities: ______________________________________________________

Business Size and eligibility under U.S. Government socio-economic programs and preference (i.e. type of business - large, small, small-disadvantaged, women-owned, veteran-owned, or 8(a)): ___________________________________________________

If your company is a small business, is the company compliant In Accordance With FAR 52.219-14, Limitations on Subcontracting: _____________________________________

Is your company located in a labor surplus area or a HUB Zone: ____________________

Does your company utilize a Defense Contract Audit Agency (DCAA) certified cost system: _______________________________________________________________________

Point of Contact (POC) Identification:

Name: _________________________________________________________________

Title: ___________________________________________________________________

Telephone Number: _______________________________________________________

Fax Number: _____________________________________________________________

E-Mail Address: ___________________________________________________________

Alternate POC: _________________________________________________________

Alternate POC Title: _____________________________________________________

Alternate POC Telephone Number: _________________________________________

Alternate POC Fax Number: _______________________________________________

Alternate POC E-Mail Address: _____________________________________________

Business Profile:

1. What products/services does your company primarily manufacture? Please list the names and/or identifying numbers of the specific trucks and trailers you are describing in response to this questionnaire.

2. How long has your company been in business?

3. What business type is your company (large, small, small-disadvantaged, women-owned or 8(a)? Is your company located in a labor surplus or HUB-zone (See FAR Part 19 -Small Business Programs)?

4. List your North American Industry Classification System (NAICS) Codes, Commercial and Government Entity (CAGE) Code and Data Universal Numbering System (DUNS) number.

Past Performance:

5. What experience does your company have in military tactical wheeled vehicle production?

6. Are your described trucks and trailers bought and sold commercially? If so, how many years have they been on the market?

Programmatic:

7. Please provide a detailed explanation (including preferences) of the extent to which contract type/structure (i.e. multi-year contract, requirements contract with options, Indefinite- Delivery/Indefinite Quantity contract with options) and contract length (3 vs. 5 years) influence your interest in participating in an RFP for this requirement?

Logistics:

8. Describe your Integrated Logistics Support program including personnel and maintenance training, provisioning, technical manual development, and fleet management.

9. What is your experience with Army repair parts provisioning and developing Army formatted Interactive Electronic Technical Manuals (IETMs)?

10. What are the customary practices of your company with regard to packaging, warranty, discounts, etc. under which your company makes commercial sales of this product?

11. What are your capabilities to deliver Department of the Army (DA) authenticated manuals prior to Full Material release?

Production Capability:

12. Would a sub-contractor produce some or all of the vehicles? Please elaborate.

13. The truck variants with the "P2" suffix in the model number are required to have armor protection that affords a degree of ballistic protection to be determined by the Government for the operator and passenger. The ballistics protection to be installed on production vehicles includes armor parts determined to be hard to install after production and permanent mounting provisions designed to accept armor components installed as necessary in the field. Please describe the experience/capability you possess in this area and how does this armor assembly requirement otherwise impact your production capability?

14. What is the minimum/maximum quantity you can produce during the "First" year vehicle call-up?

15. What is the minimum/maximum monthly production rate for FMTV orders following the "First" year vehicle call-up?

16. What is the production lead-time to deliver test vehicles after contract award?

17. What is the capability to produce the variants listed on pages one and two of the survey in an A2P2 configuration?

18. With your current facilities, what is your maximum (surge) production rate?

19. How long will it take from contract award to establish a vendor base, order hardware and deliver the First Article Test vehicles?

20. Has your company produced a FMTV (or similar) for either commercial or military application? If so, for whom? When?

21. Has your company produced a FMTV that meets the requirements of an ATPD? If your product does not meet the requirements of ATPD 2131U which requirements of ATPD 2131U does your vehicle not meet?

22. Has your company's product been tested in accordance with any standardized test methods such as those from the American Society of Testing and Materials (ASTM) or the Society of Automotive Engineers (SAE)? If yes, which tests were conducted? When? If not, has this vehicle been tested using an internal company standard? If yes, please briefly describe the testing method(s) used and provide any details about the test results that your company would like to share.

Engineering:

23. Does your company have the capability to submit data/drawings via electronic/digital data media? Can your company provide data through a web-based Advanced Collaborative Environment (ACE) such as FedBizOps? If yes, what hardware and software do you use?
24. What types of modeling and simulation data are available for the products you offer (i.e. CAD, dynamics model, etc)? What formats is this data available in?

25. What is your process for implementing engineering changes and drawing changes into production? Does your company have experience/capability to use Creo Parametric software (formerly Pro/Engineering) software?

26. What security clearances does your company have?

27. Is your company capable of providing RAM-D data?

Service Support:

28. How do you support your current products?

29. Describe your dealership maintenance capabilities.

30. Do you have any dealerships located Outside Continent of United States (OCONUS)? If so, where are they located?

Purchase Description:
31. In describing your capability to provide the vehicles described by the attached Purchase Description, your comments are welcome for any Purchase Description paragraph requirement (with paragraph specified).

32. Please add any additional comments:
NOTE: The Government is not asking you to develop or provide drawings or develop any technical data in response to this market survey.

Please send your completed survey questionnaire to Mr. Timothy A. Nichols at timothy.a.nichols1.civ@mail.mil. Companies responding to this survey are required to submit electronic responses in accordance with paragraph 3 of this survey.
Direct questions regarding the market survey to Mr. Timothy A. Nichols at timothy.a.nichols1.civ@mail.mil or (586) 282-8608. Alternate POC is Marc Aldwin Landoy, marcaldwin.m.landoy.civ@mail.mil, (586) 282-8731.

.

Market Survey
Family of Medium Tactical Vehicles (FMTV)

1. Family of Medium Tactical Vehicles. The Product Manager, Medium Tactical Vehicles (PM MTV) located at the United States Army TACOM Life Cycle Management Command (LCMC) in Warren, Michigan is seeking to identify sources capable of manufacturing the existing designed vehicles with modernization Engineering Change Proposals (ECP) and provide System Technical Support (STS) and Maintenance Technical Representative (MTR) support for the follow-on acquisition of Family of Medium Tactical Vehicles (FMTV) consisting of 2½ & 5 ton trucks and trailers. The vehicles should possess capabilities that meet the requirements specified in the Army Technical Purchase Description (ATPD) 2131, Rev U and Technical Drawing Packages for the following variants:


Variant NSN Vehicle Description
M1078A1P2 2320-01-549-8577 LMTV Cargo
M1078A1P2 2320-01-549-8611 LMTV Cargo with winch
M1079A1P2 2320-01-552-7745 LMTV Van
M1079A1P2 2320-01-552-7749 LMTV Van with winch
M1080A1P2 2320-01-552-7791 LMTV Chassis
M1082 2320-01-449-1775 Trailer, LMTV Cargo
M1083A1P2 2320-01-549-8610 MTV Cargo
M1083A1P2 2320-01-549-8565 MTV Cargo with winch
M1084A1P2 2320-01-552-7739 MTV Cargo with Mine Handling Equipment (MHE)
M1084A1P2/RSV 2320-01-552-7767 MTV Cargo with MHE* (HIMARS RSV)
M1085A1P2 2320-01-552-7773 MTV Cargo, Long Wheel Base (LWB)
M1085A1P2 2320-01-552-7770 MTV LWB Cargo with winch
M1085A1P2 2320-01-552-7770 MTV LWB Cargo w/ Sideboard Delete
M1086A1P2 2320-01-552-7780 MTV LWB Cargo with MHE
M1086A1P2 2320-01-552-7776 MTV LWB Cargo with MHE & winch
M1087A1P2 2320-01-552-7781 MTV Expansible Van
M1088A1P2 2320-01-552-7759 MTV Tractor
M1088A1P2 2320-01-552-7753 MTV Tractor with winch
M1089A1P2 2320-01-595-3994 MTV Wrecker
M1092A1P2 2320-01-552-7793 MTV Chassis
M1095 2320-01-449-1776 Trailer, MTV Cargo
M1096A1P2 2320-01-552-7796 MTV LWB Chassis
M1147 2320-01-508-7887 LHS Trailer
M1148A1P2 2320-01-557-4546 LHS Truck
M1157A1P2 2320-01-552-7787 10 Ton Dump
M1157A1P2 2320-01-552-7782 10 Ton Dump with winch
M1273A1P2 2320-01-621-6239 MTV 10 Ton Chassis

The Government intends to integrate ECPs into the A1P2 as a modernization effort to restore lost capability and allow capacity for integration of new technologies. The MTV ECP efforts will:
a. Integrate higher capacity suspension, wheels, and tires.
b. Integrate underbody protection.
c. Increase engine power.
d. Integrate higher capacity alternator.
e. Integrate data bus upgrade.
f. Integrate safety enhancements (Electronic Stability Control)

The result of the A1P2 modernization effort will be an A2P2 version of the MTV and an updated revision of ATPD.

** The FMTV Technical Data Package, Army Technical Purchase Description (ATPD) 2131, Rev U and The FMTV Long Term Armor Strategy (LTAS) Technical Manuals are "For Official Use Only." All documents are marked Distribution D - Export Controlled. The Government will provide these Attachments separately via requests through FedBizOps. Interested parties can request access via: https://www.fbo.gov/fedteds/W56HZV16R0024. The interested party must submit a signed Non-Disclosure Agreement (NDA) upon request of this information via email to the Government Point of Contact before approval will be granted. The NDA is attached to this announcement.

2. Market Survey Request. This market survey seeks to determine industry capability to provide 2½ and 5-Ton trucks and trailers, including STS and MTR support beginning mid-year FY17. The changes in the commercial marketplace for tactical vehicles over the past six years have prompted the need to publish this market survey. If interested, furnish your detailed responses to this market survey questionnaire. Provide any supplemental information or commercial literature describing the human factors, engineering, safety, supportability, quality, cost, product availability or other information not specifically requested that supports your response. The Government does NOT wish to obtain any proprietary or otherwise protected documents resulting from this market survey. The Government may return such data or documents submitted that have proprietary or protected markings. The intent of this market research process is to obtain only commercially available information about contractor's products.

All portions of these enclosures are merely for market research purposes, subject to change at any time, are in no way binding on the Government and do not represent an established requirement. The furnished enclosures are for information purposes only with the understanding that the Government is under no obligation of any kind to proceed with an acquisition in any way related to or based upon the data set forth in these enclosures. The information contained in this survey is not a basis to seek payment, reimbursement or other consideration from the Government. Moreover, the intention of this survey is not to solicit any proposals from Industry.

3. Responses. Responses to this market research survey questionnaire, comments to the purchase description, as well as industry questions should be sent via e-mail to the Contracting Officer, Mr. Timothy Nichols, timothy.a.nichols1.civ@mail.mil with a copy furnished to Contract Specialist, Mr. Marc Aldwin Landoy at marcaldwin.m.landoy.civ@mail.mil.

Response Format. Electronic responses are required. The maximum size of each e-mail message should be no more than three and one-half (3.5) megabytes. You may use multiple e-mail messages. The subject line must include the message number, (example: 1 of 3, 2 of 3, 3 of 3), and "[Firm's Name] response to FMTV". All interested firms, regardless of size, are encouraged to respond to this request for information. Reference http://contracting.tacom.army.mil/acqinfo/ebidnotice.htm for electronic submission details.

Responses Due. Replies to this questionnaire must be received by 5:00 PM Eastern Daylight Time (EDT) on 28 December 2015.

5. Market Survey Questionnaire. The below questions are intended to provide a snapshot of your capabilities to supply the FMTVs together with the logistics, engineering and support requirements.

MARKET RESEARCH SURVEY QUESTIONNAIRE
Family of Medium Tactical Vehicles

Company Identification:

Company Name: ________________________________________________________

Mailing Address: _________________________________________________________

_______________________________________________________________________

Company website: ________________________________________________________

Commercial and Government Entity Code (CAGE): ______________________________

Data Universal Numbering System Number (DUNS): _____________________________

North American Industry Classification System (NAICS): __________________________

Location of Facilities: ______________________________________________________

Business Size and eligibility under U.S. Government socio-economic programs and preference (i.e. type of business - large, small, small-disadvantaged, women-owned, veteran-owned, or 8(a)): ___________________________________________________

If your company is a small business, is the company compliant In Accordance With FAR 52.219-14, Limitations on Subcontracting: _____________________________________

Is your company located in a labor surplus area or a HUB Zone: ____________________

Does your company utilize a Defense Contract Audit Agency (DCAA) certified cost system: _______________________________________________________________________

Point of Contact (POC) Identification:

Name: _________________________________________________________________

Title: ___________________________________________________________________

Telephone Number: _______________________________________________________

Fax Number: _____________________________________________________________

E-Mail Address: ___________________________________________________________

Alternate POC: _________________________________________________________

Alternate POC Title: _____________________________________________________

Alternate POC Telephone Number: _________________________________________

Alternate POC Fax Number: _______________________________________________

Alternate POC E-Mail Address: _____________________________________________

Business Profile:

1. What products/services does your company primarily manufacture? Please list the names and/or identifying numbers of the specific trucks and trailers you are describing in response to this questionnaire.

2. How long has your company been in business?

3. What business type is your company (large, small, small-disadvantaged, women-owned or 8(a)? Is your company located in a labor surplus or HUB-zone (See FAR Part 19 -Small Business Programs)?

4. List your North American Industry Classification System (NAICS) Codes, Commercial and Government Entity (CAGE) Code and Data Universal Numbering System (DUNS) number.

Past Performance:

5. What experience does your company have in military tactical wheeled vehicle production?

6. Are your described trucks and trailers bought and sold commercially? If so, how many years have they been on the market?

Programmatic:

7. Please provide a detailed explanation (including preferences) of the extent to which contract type/structure (i.e. multi-year contract, requirements contract with options, Indefinite- Delivery/Indefinite Quantity contract with options) and contract length (3 vs. 5 years) influence your interest in participating in an RFP for this requirement?

Logistics:

8. Describe your Integrated Logistics Support program including personnel and maintenance training, provisioning, technical manual development, and fleet management.

9. What is your experience with Army repair parts provisioning and developing Army formatted Interactive Electronic Technical Manuals (IETMs)?

10. What are the customary practices of your company with regard to packaging, warranty, discounts, etc. under which your company makes commercial sales of this product?

11. What are your capabilities to deliver Department of the Army (DA) authenticated manuals prior to Full Material release?

Production Capability:

12. Would a sub-contractor produce some or all of the vehicles? Please elaborate.

13. The truck variants with the "P2" suffix in the model number are required to have armor protection that affords a degree of ballistic protection to be determined by the Government for the operator and passenger. The ballistics protection to be installed on production vehicles includes armor parts determined to be hard to install after production and permanent mounting provisions designed to accept armor components installed as necessary in the field. Please describe the experience/capability you possess in this area and how does this armor assembly requirement otherwise impact your production capability?

14. What is the minimum/maximum quantity you can produce during the "First" year vehicle call-up?

15. What is the minimum/maximum monthly production rate for FMTV orders following the "First" year vehicle call-up?

16. What is the production lead-time to deliver test vehicles after contract award?

17. What is the capability to produce the variants listed on pages one and two of the survey in an A2P2 configuration?

18. With your current facilities, what is your maximum (surge) production rate?

19. How long will it take from contract award to establish a vendor base, order hardware and deliver the First Article Test vehicles?

20. Has your company produced a FMTV (or similar) for either commercial or military application? If so, for whom? When?

21. Has your company produced a FMTV that meets the requirements of an ATPD? If your product does not meet the requirements of ATPD 2131U which requirements of ATPD 2131U does your vehicle not meet?

22. Has your company's product been tested in accordance with any standardized test methods such as those from the American Society of Testing and Materials (ASTM) or the Society of Automotive Engineers (SAE)? If yes, which tests were conducted? When? If not, has this vehicle been tested using an internal company standard? If yes, please briefly describe the testing method(s) used and provide any details about the test results that your company would like to share.

Engineering:

23. Does your company have the capability to submit data/drawings via electronic/digital data media? Can your company provide data through a web-based Advanced Collaborative Environment (ACE) such as FedBizOps? If yes, what hardware and software do you use?
24. What types of modeling and simulation data are available for the products you offer (i.e. CAD, dynamics model, etc)? What formats is this data available in?

25. What is your process for implementing engineering changes and drawing changes into production? Does your company have experience/capability to use Creo Parametric software (formerly Pro/Engineering) software?

26. What security clearances does your company have?

27. Is your company capable of providing RAM-D data?

Service Support:

28. How do you support your current products?

29. Describe your dealership maintenance capabilities.

30. Do you have any dealerships located Outside Continent of United States (OCONUS)? If so, where are they located?

Purchase Description:

31. In describing your capability to provide the vehicles described by the attached Purchase Description, your comments are welcome for any Purchase Description paragraph requirement (with paragraph specified).

32. Please add any additional comments:

NOTE: The Government is not asking you to develop or provide drawings or develop any technical data in response to this market survey.

Please send your completed survey questionnaire to Mr. Timothy A. Nichols at timothy.a.nichols1.civ@mail.mil. Companies responding to this survey are required to submit electronic responses in accordance with paragraph 3 of this survey.

Direct questions regarding the market survey to Mr. Timothy A. Nichols at timothy.a.nichols1.civ@mail.mil or (586) 282-8608. Alternate POC is Marc Aldwin Landoy, marcaldwin.m.landoy.civ@mail.mil, (586) 282-8731.