Fabrication of eight (8) battery charging lockers per NAVSEA drawing 803-8603354 rev C for CVN 71

Closed Pre-Solicitation Posted

Not the latest version. See the latest solicitation from .

Solicitation number
N6449820Q0187
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

Place of performance
USA

Notice details come from SAM.gov. Updated .

Notice text

The lithium battery charging locker is a two drawer storage cabinet designed for charging large form lithium batteries.  It is approximately 38.25”W x 25.2D x 47.64”H.  It is constructed of heavy gage sheet steel with high temperature insulation between the inner and outer layers of steel.  Each drawer consists of a sliding tray with straps to secure the battery inside the drawer.  A battery charger is mounted on the top and the charging cables fed through openings in the cabinet.  There is also an exhaust plenum attached to the rear of the cabinet to direct toxic gases from a battery thermal runaway to the overhead ventilation system.

The foundation template is an aluminum or steel plate consisting of the bolt hole pattern for the locker. It also contains the bolt hole pattern for the adjacent sides of the adjoining lockers.  This template is to ease the mounting of the locker to the foundation and to ensure the adjacent lockers are mated properly to the adjoining locker.

Files

File Type Posted
803-8603354C.pdf PDF
C335_SOW_ Battery Charging_Locker_CVN71 6-17-20 RFP.docx DOCX document

Notice history

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors