F100-PW-220 - 6TH-12TH STATORS AND 4TH-5TH SHROUDS - VARIOUS 2840 NSNs - VARIOUS PNs

SYNOPSIS AMENDMENT #2

1) This synopsis amendment attaches the Repair Qualification Requirements (RQRs) to the DRAFT solicitation.

2) Additionally, this synopsis amendment notifies all interested parties that the Government anticipates a slight delay to the FORMAL solicitation release as internal approvals are being obtained. The delay is expected to last until approximately 17 May 2019.

SYNOPSIS AMENDMENT #1

1) This synopsis amendment confirms that a Pre-Solicitation Teleconference will be held via teleconference on 30 April 2019 at 9:00 a.m. CST.
2) This synopsis amendment also attaches a copy of the Pre-Solicitation Teleconference slides with "Dial-In Instructions" found on slide two.
3) Questions must be provided by 4:00 p.m. CST on Friday, 3 May 2019 via email to amber.jilek@us.af.mil.
4) The Government will post questions and answers on FedBizOpps by 4:00 p.m. CST on Tuesday, 14 May 2019.

The Air Force Sustainment Center (AFSC) located at Tinker AFB, Oklahoma intends to issue a formal, competitive solicitation on or about 6 May 2019 with a close date on or about 5 June 2019 for the remanufacture of the F100-PW-220 6th-12th Stators and 4th and 5th Shrouds.  Prior to the release of the formal solicitation, AFSC intends to issue a DRAFT solicitation on or about 5 April 2019 with a close date on or about 5 May 2019. The purpose of the DRAFT solicitation is to give industry an opportunity to review AFSC's requirement and provide feedback.  The DRAFT solicitation does not represent the issuing of a formal request for proposal and is not intended to be taken as such.

The requirement is anticipated to be a total of five years, composed of a 1-year basic and four 1-year option periods. The anticipated contract type is Firm Fixed Priced (FFP) Indefinite Delivery Indefinite Quantity (IDIQ). Upon issuance of the formal solicitation, all responsible sources may submit a bid, proposal or quotation which shall be considered by the agency.  Offerors must be source approved on or before the closing date of the formal solicitation in order to be considered awardable. This notice of intent does not represent the issuing of a formal request for proposal and is not intended to be taken as such. The requirement set forth in this notice is defined per USAF PR FD2030-17-00882 and FMS PR FD2030-17-31162.

The estimated quantities below represent AFSC's best estimate of the quantities expected to generate for this requirement based on historical demand and forecasted future need; however, these estimates do not represent fixed quantities. For evaluation purposes only, maximum quantities have been identified and will be utilized to calculate a maximum contract value upon award. These quantities were forecasted with a 25% - 50% allowance based on the anticipated shifting demand rates of the individual NSNs. The formula for determining Total Evaluated Price (TEP) is Proposed Unit Price x Estimated Quantity (EST QTY) = TEP. The formula for determining maximum contract value upon award is Proposed Unit Price x Maximum Quantity = Maximum Contract Value. 

USAF & FMS CLINs X001-X018:

NOUN 6th Stage Stator
NSN 2840-01-438-0952, P/N 4083876, and/or NSN 2840-01-205-7702, P/N 4067476

USAF EST QTY - 780
USAF MAX QTY - 975
USAF DELIVERY - 14 each per month, 90 days ARO. Early delivery acceptable.

FMS EST QTY - 100
FMS MAX QTY - 195
FMS DELIVERY - 3 each per month, 90 days ARO. Early delivery acceptable.

ITEM DESCRIPTION:  23.15 inches longX 23.15 inches wide X 2.65 inches high, weighing 4.75 lbs, and composed of nickel alloy.
*****
NOUN 7th Stage Stator

NSN 2840-01-437-7833, P/N 4083517, and/or NSN 2840-01-205-7703, P/N 4067477

USAF EST QTY - 780
USAF MAX QTY - 1170
USAF DELIVERY - 14 each per month, 90 days ARO. Early delivery acceptable.

FMS EST QTY - 100
FMS MAX QTY - 190
FMS DELIVERY - 3 each per month, 90 days ARO. Early delivery acceptable.

ITEM DESCRIPTION:  25.60 inches longX 25.60 inches wide X 4.40 inches high, weighing 17.0 lbs, and composed of nickel alloy.
*****
NOUN 8th Stage Stator

NSN 2840-01-205-7700, P/N 4067478

USAF EST QTY - 660
USAF MAX QTY - 825
USAF DELIVERY - 14 each per month, 90 days ARO. Early delivery acceptable.

FMS EST QTY - 50
FMS MAX QTY - 90
FMS DELIVERY - 1 each per month, 90 days ARO. Early delivery acceptable.

ITEM DESCRIPTION:  21.57 inches longX 21.57 inches wide X 2.21 inches high, weighing 4.87 lbs, and composed of nickel alloy.

*****

NOUN 9th Stage Stator

NSN 2840-01-205-7704, P/N 4067479

USAF EST QTY - 660
USAF MAX QTY - 825
USAF DELIVERY - 13 each per month, 90 days ARO. Early delivery acceptable.

FMS EST QTY - 50
FMS MAX QTY - 100
FMS DELIVERY - 1 each per month, 90 days ARO. Early delivery acceptable.

ITEM DESCRIPTION:  21.20 inches longX 21.20 inches wide X 2.3 inches high, weighing 4.8 lbs, and composed of nickel alloy.

*****

NOUN 10th Stage Stator

NSN 2840-01-357-7885, P/N 4079480, P/N 4079490, P/N 4079540, and/or NSN 2840-01-222-9495, P/N 4067480

USAF EST QTY - 780
USAF MAX QTY - 975
USAF DELIVERY - 16 each per month, 90 days ARO. Early delivery acceptable.

FMS EST QTY - 100
FMS MAX QTY - 175
FMS DELIVERY - 2 each per month, 90 days ARO. Early delivery acceptable.

ITEM DESCRIPTION:  20.76 inches longX 20.76 inches wide X 2.211 inches high, weighing 4.78 lbs, and composed of nickel alloy.
*****
NOUN 11th Stage Stator

NSN 2840-01-357-7887, P/N 4079581, P/N 4079491, P/N 4079541 and/or NSN 2840-01-223-5867, P/N 4067481

USAF EST QTY - 780
USAF MAX QTY - 975
USAF DELIVERY - 14 each per month, 90 days ARO. Early delivery acceptable.

FMS EST QTY - 100
FMS MAX QTY - 185
FMS DELIVERY - 3 each per month, 90 days ARO. Early delivery acceptable.

ITEM DESCRIPTION:  20.55 inches longX 20.55 inches wide X 2.06 inches high, weighing 5.5 lbs, and composed of nickel alloy.

*****

NOUN 12th Stage Stator

NSN 2840-01-357-7889, P/N 4079492, P/N 4079622, P/N 4079542 and/or NSN 2840-01-222-9496, P/N 4067482

USAF EST QTY - 780
USAF MAX QTY - 975
USAF DELIVERY - 14 each per month, 90 days ARO. Early delivery acceptable.

FMS EST QTY - 125
FMS MAX QTY - 190
FMS DELIVERY - 3 each per month, 90 days ARO. Early delivery acceptable.

ITEM DESCRIPTION:  20.33 inches longX 20.33 inches wide X 3.798 inches high, weighing 4.96 lbs, and composed of nickel alloy.

*****

NOUN 4th Stage Shroud

NSN 2840-01-426-6695, P/N 4081554

USAF EST QTY - 780
USAF MAX QTY - 975
USAF DELIVERY - 15 each per month, 90 days ARO. Early delivery acceptable.

FMS EST QTY - 75
FMS MAX QTY - 115
FMS DELIVERY - 2 each per month, 90 days ARO. Early delivery acceptable.

ITEM DESCRIPTION:  1.658 inches longX 27.2 inches wide X 3.4 inches high, weighing 9.0 lbs, and composed of nickel alloy.

*****

NOUN 5th Stage Shroud

NSN 2840-01-426-5477, P/N 4081555

USAF EST QTY - 780
USAF MAX QTY - 975
USAF DELIVERY - 15 each per month, 90 days ARO. Early delivery acceptable.

FMS EST QTY - 75
FMS MAX QTY - 115
FMS DELIVERY - 2 each per month, 90 days ARO. Early delivery acceptable.

ITEM DESCRIPTION:  24.20 inches longX 24.20 inches wide X 1.5 inches high, weighing 2.7 lbs, and composed of nickel alloy.

*****

USAF & FMS CLIN X019:

Data - 1 LOT - Not Separately Priced
USAF & FMS delivery for CLIN X019 will be in accordance with required CDRLs.


QUALIFICATION REQUIREMENTS: The government has sufficient technical data to establish Qualification Requirements (QR). Availability of this technical data is annotated on the Repair Data List and has been loaded to the QR synopsis posting on FedBizOpps (FBO.gov). Additionally, the posting on FBO identifies the requirements a prospective vendor must meet to become a qualified source. At this time, there are two qualified sources, making this a competitive requirement between United Technologies Corp, DBA Pratt & Whitney Military After Market Services Inc (CAGE: 3ELG9) and Chromalloy Gas Turbine LLC, DBA Chromalloy Georgia (CAGE: 2B972).

 
OMBUDSMAN: (AUG 2005) (An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition.) The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 405-736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.

CONTRACTING OFFICE INFORMATION: 
M. Steve Moore
Contracting Officer
AFSC/PZAAA
3001 Staff Dr. Ste 1AD297E
Tinker AFB, OK 73145