F-22 Tier 2 Parts Racks & Horizontal Stabilator Dollies
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- FA822424Q0020
- Agency
-
Air Force Sustainment Center
Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 336413 Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Place of performance
- Hill AFB, Utah 84056, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Air Force Materiel Command Air Force Sustainment Center is seeking to procure five Tier 2 Parts Racks and four Horizontal Stabilator Dollies for the F-22 aircraft under Solicitation Number FA822424Q0020. The contract will be awarded to the lowest priced technically acceptable proposal using firm-fixed price commercial item procedures. Offerors must submit their proposals in three volumes: Price, Technical, and Contract Documentation. The technical evaluation will assess the offeror's experience, ability to meet the design requirements, and delivery timeline. Proposals are due within 90 calendar days of the solicitation posting.
This is a 100% Women-Owned Small Business (WOSB) set-aside contract. There are no incumbent contractors named. The estimated value is not provided, but the requirement is for up to five Tier 2 Racks and four Horizontal Stabilator Dollies, with delivery of the first article and initial set of dollies expected within 150 days of contract award. The place of performance is Hill AFB, UT.
Notice text
2 versions
Update #2 · Latest ·
The purpose of this solicitation is to obtain Five (5) Tier 2 Racks (drawing X202312518) and four (4) Horizontal Stabilator Dollies (drawing 5HW01702-101) IAW the drawings and statement of work attached.
Award of this solicitation will be to the lowest priced technically acceptable proposal. This will be a firm fixed price commercial supply contract. Please review all solicitation documents attached. The 52.212-1 and 52.212-2 documents provide the proposal submission requirements and evaluation criteria.
The drawings are export controlled. To obtain the drawings, an approved defense form 2345 will be required. One can be requested through https://www.dla.mil/Logistics-Operations/Services/JCP/. All responsible sources may submit a quote which shall be considered by the agency. If you have an approved 2345 registered on the JCP website, the drawings can be requested for approval and access through this solicitation.
If you have any questions about the solicitation, please reach out to the contacts on this notice as soon as possible.
12 Sept 2024 Notes:
Amendment 0001 is added on 12 Sept 2024 to make a small update to the Dolly drawing and adding additional information concerning the Dolly drawing to the SOW on page 9 sections 4.4 and 4.5. Please download the updated SOW and Dolly Drawing. These adjustments were made based on contractor questions as listed below.
- For the TDP – are there any models available that can be provided?.
- There is a SolidWorks model of the tier 2 rack that could be made available. Also, there is a Catia v4 model of the HS dolly. This is a .model file and will require Catia software to be of use. Let us know if either is needed prior to proposal submittal.
- On drawing 5HW01702, detail number 104 and 105 appear on the parts list with quantities and cage codes, but there’s no part number or description.
- Detail numbers 104 & 105 should be disregarded.
- Does the stress relief test apply to the full top assembly of the Horizontal Stabilator?
- Contractor should reference MIL-STD-11991B in lieu of PM-4053. MIL-STD states stress relief only applies to weldments when a stress has been induced due to welding. This will apply to any weldments in the dolly.
- Where the drawings reference PM-4053, the contractor should instead reference MIL-STD-11991B. MIL-STD-11991B can be found on dla.assist.mil or upon request to the Contracting Officer.
Update #1 ·
The purpose of this solicitation is to obtain Five (5) Tier 2 Racks (drawing X202312518) and four (4) Horizontal Stabilator Dollies (drawing 5HW01702-101) IAW the drawings and statement of work attached.
Award of this solicitation will be to the lowest priced technically acceptable proposal. This will be a firm fixed price commercial supply contract. Please review all solicitation documents attached. The 52.212-1 and 52.212-2 documents provide the proposal submission requirements and evaluation criteria.
The drawings are export controlled. To obtain the drawings, an approved defense form 2345 will be required. One can be requested through https://www.dla.mil/Logistics-Operations/Services/JCP/. All responsible sources may submit a quote which shall be considered by the agency.
If you have any questions about the solicitation, please reach out to the contacts on this notice as soon as possible.
Files
Notice history
| Notice | Type | Posted |
|---|---|---|
| F-22 Tier 2 Parts Racks & Horizontal Stabilator Dollies | Award Notice | |
| This notice | Solicitation | |
| F-22 Tier 2 Parts Racks & Horizontal Stabilator Dollies | Pre-Solicitation | |
| F-22 Tier 2 Parts Racks & Horizontal Stabilator Dollies | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| F-16 Wheel Housing Section | Air Force Sustainment Center | Total Small Business | |
| F-16 Flaperon | Aviation | No set-aside | |
| Hill AFB Actuator Phase 2A | Aviation | No set-aside | |
| F-16 Horizontal Stabilizer | Aviation | No set-aside | |
| TT&E and Repair of B-2 Electro-Mechanical Actuators | Air Force Sustainment Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity