F-16 Electronics Component
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- SPRHA4-25-R-0035
- Agency
- Aviation Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 334412 Bare Printed Circuit Board Manufacturing
- Place of performance
- United States
- Points of contact
-
- Michelle Mihu michelle.mihu@us.af.mil (385) 591-5148
Notice details come from SAM.gov. Updated .
About this opportunity
The Defense Logistics Agency Aviation is procuring F-16 Electronics Components, specifically a Jettison/Release Remote Interface Unit (J/RRIU) with National Stock Number 5998-01-080-3978. This acquisition is restricted to qualified sources, currently limited to Elbit (CAGE 0WEC9) and Lockheed Martin (CAGE 81755), though other contractors may become qualified by submitting a qualification package following the Manufacturing Qualification Requirements outlined in clause 52.2091. The procurement involves comprehensive requirements including counterfeit prevention plans, adherence to military packaging standards, and extensive technical documentation. The qualification process is estimated to take 90 days and cost approximately $4,800 for potential manufacturers who must demonstrate manufacturing capabilities, undergo facilities verification, and provide pre-contract award qualification articles for evaluation. The solicitation closing date has been extended twice, with the current deadline set for August 23, 2025, following Amendment 0002 issued on July 16, 2025.
This opportunity does not utilize any set-aside designations and is open to all qualified sources that can meet the stringent manufacturing requirements. The two currently qualified sources are Elbit Systems and Lockheed Martin Corporation, with Lockheed Martin appearing to be significantly involved given their extensive engineering documentation and technical specifications included in the solicitation package. While specific award values are not disclosed in the available documentation, the procurement involves complex electronic assemblies requiring compliance with ISO 9001-2015 standards and extensive supply chain traceability documentation. The contract includes provisions for Foreign Military Sales components, specifically mentioning Taiwan as a destination. Performance will occur within the United States, with the contracting office located at Hill Air Force Base in Utah, and the procurement is managed under the broader Defense Logistics Agency Aviation operations.
Notice text
3 versions
Update #3 · Latest ·
Amd 0002: extends closing to 8/22/25
Amd 0001: extends closing to 7/15/25
SPRHA4-25-R-0035 replaces SPRHA4-25-Q-0035 in its entirety.
This acquisition is restricted to qualified source(s): Elbit (CAGE 0WEC9) and Lockheed Martin (CAGE 81755). Award can be made to a vendor; part(s) must be manufactured by a qualified source. Contractors desiring to become a qualified source must submit a qualification package. Please see clause 52.2091 and the attached Manufacturing Qualification Requirement for additional details.
Technical Data Package is under original solicitation SPRHA4-25-Q-0035 (see Links)
Update #2 ·
Amd 0001: extends closing to 7/15/25
SPRHA4-25-R-0035 replaces SPRHA4-25-Q-0035 in its entirety.
This acquisition is restricted to qualified source(s): Elbit (CAGE 0WEC9) and Lockheed Martin (CAGE 81755). Award can be made to a vendor; part(s) must be manufactured by a qualified source. Contractors desiring to become a qualified source must submit a qualification package. Please see clause 52.2091 and the attached Manufacturing Qualification Requirement for additional details.
Technical Data Package is under original solicitation SPRHA4-25-Q-0035 (see Links)
Update #1 ·
SPRHA4-25-R-0035 replaces SPRHA4-25-Q-0035 in its entirety.
This acquisition is restricted to qualified source(s): Elbit (CAGE 0WEC9) and Lockheed Martin (CAGE 81755). Award can be made to a vendor; part(s) must be manufactured by a qualified source. Contractors desiring to become a qualified source must submit a qualification package. Please see clause 52.2091 and the attached Manufacturing Qualification Requirement for additional details.
Technical Data Package is under original solicitation SPRHA4-25-Q-0035 (see Links)
Attachments
| File | Type | Posted |
|---|---|---|
| SPRHA425R0035_______0002 CUI.pdf | ||
| SPRHA425R0035 CUI.pdf | ||
| SPRHA425R0035_______0001 CUI.pdf | ||
| MQR.pdf | ||
| Pkg_SOW.pdf | ||
| EDR.pdf | ||
| EDL.pdf | ||
| CDRL_CPP.pdf | ||
| SPRHA425R0227 0001 CUI.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| F-16 Electronics Component | Award Notice | |
| F-16 Electronics Component | Solicitation | |
| F-16 Electronics Component | Pre-Solicitation | |
| F-16 Electronics Component | Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity