Exterior Mortar and Interior Plaster Repairs

Added: Feb 17, 2017 6:05 pm  

Portland Customhouse ME0035ZZ Envelope Project

Exterior Synopsis:

The Customhouse was built in 1867 in the Second Empire/Renaissance Revival style. Primary work includes masonry repointing, restoration & cleaning, and the replacement of damaged lead joints. Contractor coordination shall be required due to the continuous occupancy of the building. The contractor shall maintain the building security, secure scaffolding and avoid any procedure that will compromise the secure perimeter. The performance period shall be 60 days after receipt of the notice to proceed.

The Contractor shall provide all management, supervision, labor, materials, tools and equipment to repair and restore the masonry building exterior on the Pearl St. side at the U.S. Customhouse in Portland, Me. The following work is required for this restoration project.

•1.      Repointing/restoration failing granite mortar joints on the roof top, balustrade, and include the façade above the second floor windows up to the roof.

•2.      On the roof top, repointing to include the balustrades, parapet, coping and existing water table.

•3.      Masonry cleaning: There is substantial biological growth within the mortar joints and on granite surfaces.  Apply an appropriate cleaner to remove and kill the biological growth from the masonry. Include removing any rust stains on the façade.

•4.      Lead Joints: Repair and or replace the failing lead joint covers. The covers include the tee, left & right angles and edge covers.                         

Interior Synopsis:

 A.     The Contractor shall provide all management, supervision, labor, materials, tools and equipment to repair and restore the interior plaster surfaces on the 2nd floor, Pearl St. side ballroom at the U.S. Customhouse in Portland, Me. The following work is required for this restoration project and includes all labor, materials, equipment, and services necessary to complete the interior restoration of plaster and painting as specified herein, including, but not limited to the following:

            1.  Examine, sound and probe damaged plaster to determine the extent of work at and mark out plaster surfaces with designation for work required to achieve sound plaster surfaces    at each location.

            2.  Removal of loose flat plaster to sound substrate and sound adjacent plaster, preparation of substrate and edges of adjacent sound plaster, and provision of new finish coat plaster                to match profile and texture of adjacent sound plaster.

            3.  Removal of lifting and flaking paint without damaging plaster substrate and filling areas from which paint was removed flush with surfaces of adjacent sound paint to match surface texture of adjacent painted surfaces.

            4.  Removal of chipped and loose material along stable cracks in plaster, sanding to remove sharp edges, and filling cracks to match profile and texture of adjacent sound plaster.

            5.  Re-adhering detached historic plaster & delaminated layer or layers of plaster to sound base coat plaster.

            6.  Patch ornamental, and molded plaster surfaces where required for sound plasterwork.  Create molds for and provide new cast plaster elements to match existing original moldings

The Solicitation Package will be posted on FedBizOpps on or about March 3, 2017