Electric Motors Services
Closed Solicitation Posted
- Solicitation number
- W911KF-23-Q-0002
- Agency
-
ACC Warren
Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- PSC
- 6105 Motors, Electrical
- Place of performance
- Anniston, Alabama 36201, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Contracting Command Detroit Arsenal is soliciting proposals to provide corrective maintenance support for electric motors located at Anniston Army Depot in Anniston, Alabama. The contractor shall provide repair, rewinding, testing, and replacement services for electric motors for a one-year base period, with evaluations based on technical compliance and price using hourly labor rates. Proposals are due by November 18, 2022. Services include shaft balancing, phase balancing, winding testing, and ensuring connections meet specifications.
The solicitation is set aside for total small business and covers NAICS 238210 - Electrical Contractors and PSC R499 - Repair and Alteration of Electrical Equipment. The place of performance is Anniston, Alabama. Services will be provided over a one-year base period with four one-year options to extend. The solicitation number is W911KF-23-Q-0002 and was issued by the Department of the Army Materiel Command Contracting Command Detroit Arsenal.
Notice text
This specification establishes a requirement for corrective maintenance support for the electric motors located at Anniston Army Depot, Anniston, Alabama. The maintenance coverage shall be for a one-year base period. Repair, rewind, test, and replace motors. Contractor shall provide but it not limited to the following services on all motors unless otherwise noted. 1) Shaft balance and runout shall meet OEM specifications. 2) Phase balance shall meet OEM specification (3 phase electric motors). 3) Windings shall be tested to ensure no grounds (earth faults), short circuits, open circuits, incorrect connections, or high resistance connections. 4) Connections which are made by crimping, soldering, brazing, or welding shall use materials that have an adequate conductivity and are mechanically strong enough to withstand the normal operating conditions.
Files
| File | Type | Posted |
|---|---|---|
| Attach 3-Past Performance Questionnaire.pdf | ||
| Attach 1-SOW-Rev1.docx | DOCX document | |
| Attach 4-Wage Determination 2015-4587-Rev No 20.pdf | ||
| Attach 2-Evidence of Authority To Sign Offers.pdf | ||
| Solicitation.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| This notice | Solicitation | |
| Electric Motors Services | Solicitation | |
| Electric Motors Services | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Motor, electric | Land and Maritime | No set-aside | |
| Motor, alternating current | Land and Maritime | No set-aside | |
| Motor, Control | ACC Redstone | No set-aside | |
| Med. Press. Pump Module Motor Rebuild | Air Force Sustainment Center | Total Small Business | |
| Motor, alternating CUR | Land and Maritime | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity