Drydock repairs for the USCGC mobile BAY and barge

The United States Coast Guard Surfaces Force Logistic Center, intends to issue a Commercial Request for Quote (RFQ) for DRYDOCK Repairs to the USCGC MOBILE BAY AND BARGE. The acquisition will be solicited as a Total Small Business Set-Aside. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation FAR Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a Best Value, Request for Quote (RFQ), on or about December 31, 2014. The solicitation will be issued electronically on the FEDBIZOPPS web page at http://www.fedbizopps.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for RFQ release and all subsequent amendments. Please sign up for the Auto Notification service to receive e-mail from FEDBIZOPPS when an action is taken under this solicitation. If you have questions regarding FEDBIZOPPS, contact Sandra Martinez at (757) 628-4591 or email sandra.a.martinez@uscg.mil. Hard copies of the specification and solicitation will not be issued. A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests via e-mail sandra.a.martinez@uscg.mil. Contractor shall provide all necessary facilities, materials, equipment, and personnel to DRYDOCK repairs to the USCGC MOBILE BAY AND 120 Foot Barge. The USCGC MOBILE BAY is home ported in STURGEON BAY, WI. Geographic Restriction: Restricted to the Great Lake Area.
SCOPE OF WORK: The scope of the acquisition is for the DRYDOCK repairs of the USCGC MOBILE BAY. This work will include, but is not limited to the following work items:
WORK ITEM 1: Hull Plating (U/W Body), Inspect - Tender
WORK ITEM 2: Hull Plating (U/W Body), Inspect - Barge
WORK ITEM 3: Hull Plating (U/W Body), Ultrasonic Testing - Tender
WORK ITEM 4: Bubbler Channels, Inspect
WORK ITEM 5: Appendages (U/W), Leak Test - Tender
WORK ITEM 6: Appendages (U/W) - Internal, Preserve - Tender
WORK ITEM 7: Voids (Non-Accessible), Leak Test Tender
WORK ITEM 8: Voids (Non-Accessible), Internal Surfaces, Preserve - Tender
WORK ITEM 9: Tanks (MP Fuel Service), Clean and Inspect - Tender
WORK ITEM 10: Propulsion Shafting, Remove, Inspect, and Reinstall
WORK ITEM 11: Propulsion Shafting, Thrust Bearing Measurement
WORK ITEM 12: Propulsion Shaft Seals, Overhaul
WORK ITEM 13: Propulsion Shaft Bearings (External), Check Clearances
WORK ITEM 14: Propulsion Shaft Bearing Staves, Renew
WORK ITEM 15: Propeller, Remove, Inspect, and Reinstall
WORK ITEM 16: Propeller, Perform Minor Repairs and Reconditioning
WORK ITEM 17: Main Propulsion Motor Sea Water and Lube Oil Pumps, Renew
WORK ITEM 18: SW Heat Exchangers, Clean, Inspect and Hydro - Tender
WORK ITEM 19: SW Heat Exchangers, Clean, Inspect and Hydro - Barge
WORK ITEM 20: Main Diesel Engine (MDE) Exhaust Piping, Commercial Clean
WORK ITEM 21: Ship Service Diesel Generator (SSDG) Exhaust Piping,Commercial Clean
WORK ITEM 22: Boiler Exhaust Piping, Commercial Clean
WORK ITEM 23: Circuit Breakers (60 Hz), Inspect and Test - Tender
WORK ITEM 24: Fathometer Transducer, Renew - Tender
WORK ITEM 25: Sea Strainers - Simplex (All Sizes), Clean and Inspect
WORK ITEM 26: Rudder Assembly; Remove, Inspect and Reinstall
WORK ITEM 27: Rudder Stock Bearings Clearances, Check
WORK ITEM 28: Rudder Stock Bearings (Upper and Lower), Renew
WORK ITEM 29: Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test
WORK ITEM 30: Vertical Capstan, Inspect and Service - Tender
WORK ITEM 31: Hull Fittings (Mooring and Towing), Inspect and Test - Tender
WORK ITEM 32: Hull Fittings (Mooring and Towing), Inspect and Test - Barge
WORK ITEM 33: Tanks (Sewage Vacuum Collection), Preserve "100%"
WORK ITEM 34: Tanks (Potable Water), Preserve "100%"
WORK ITEM 35: Tanks (Potable Water), Preserve "Partial"
WORK ITEM 36: U/W Body, Preserve (100%) - Tender
WORK ITEM 37: U/W Body, Preserve (100%) - Barge
WORK ITEM 38: Hull Plating Freeboard, Preserve "100%" - Barge
WORK ITEM 39: Cathodic Protection Anodes, Renew - Tender
WORK ITEM 40: Cathodic Protection Anodes, Renew - Barge
WORK ITEM 41: Drydocking - Tender
WORK ITEM 42: Drydocking - Barge
WORK ITEM 43: Temporary Services, Provide - Tender
WORK ITEM 44: Sea Trial Performance, Support, Provide
WORK ITEM 45: Deck Gear, Shrink Wrap
WORK ITEM 46: Buoy and Cargo Handling Crane, Shrink Wrap
WORK ITEM 47: Lower Motor Room and Aux Space II, Preserve
WORK ITEM 48: Bulkhead and Window, Renew - Tender
WORK ITEM 49: Port and Stbd Sea Chest Vents Piping, Renew
WORK ITEM 50 Watertight Door (External), Renew - Tender
WORK ITEM 51: Water Tight Hatch (Internal DC Deck and Below), Renew - Tender
WORK ITEM 52: Thruster Unit (General), Overhaul - Barge
WORK ITEM 53: Liquid Service Tank, Renew
WORK ITEM 54: Anchor Pocket Hull Plate, Renew - Barge
WORK ITEM 55: Hull Plating (U/W Body), Ultrasonic Testing - Barge
WORK ITEM 56: Hull Plating Freeboard, Preserve "100%" - Tender
WORK ITEM 57: Fathometer Transducer, Renew - Barge
WORK ITEM 58: Circuit Breakers (60 Hz), Inspect and Test - Barge

Anticipated Period of Performance: The period of performance is anticipated to be for FIFTY (50) calendar days with a start date of 13 MAY 2015 through 01 JULY 2015 (Subject to change at the discretion of the Government).
NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,000 employees.

All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. This solicitation is Subject to Availability of Funds. All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For information concerning this acquisition contact the Contracting Official listed above