Drydock for USCGC pendant (WYTL-65608)

The United States Coast Guard, Surface Forces Logistics Center, Detachment Norfolk VA, intends to issue a Commercial Request for Quotes (RFQ) for drydock and repairs to the USCGC PENDANT (WYTL-65608) a 65 foot harbor tug. The NAICS Code is 336611.

The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Part 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a Small Business Set-Aside. Request for Quotes (RFQ) will be issued on or about June 11, 2014.

The acquisition is to perform a drydock and repairs to the USCGC PENDANT (WYTL-65608). All work will be performed at a contractor's facility within 195 nautical miles of it's homport of Boston, MA. The anticipated Period of performance is forty-four (44) calendar days from 15 October through 26 November 2014.

The solicitation will be issued electronically via the Federal Business Opportunity web page at http://www.fedbizopps.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for the RFQ release and all subsequent amendments. Hard copies of the specification and solicitation will not be issued.

The scope of the acquisition is for the overhauling, renewing and repairing of various items aboard the USCGC PENDANT (WYTL-65608). This work may include, but is not limited to:

1. Hull Plating (U/W Body), Inspect
2. Appendages (U/W), Leak Test
3. Appendages (U/W) - Internal, Preserve
4. Propeller, Remove, Inspect, and Reinstall
5. Keel Coolers, Clean, Inspect and Hydro
6. Main Diesel Engine (MDE) Exhaust Piping, Commercial Clean
7. Boiler Exhaust Stack Uptakes, Commercial Clean
8. Fathometer Transducer, General Maintenance
9. Sewage and Grey Water Tanks, Commercial Clean
10. U/W Body, Preserve (100 percent)
11. Cathodic Protection / Zinc Anodes, Renew
12. Drydocking
13. Temporary Services, Provide - Tender
14. Compartment(s) Interior, Lead Dust, Clean
15. Fixed Ballast (Lead Ingots), Encapsulate
16. Hull Plating (U/W Body), Ultrasonic Testing
17. Hull and Structural Plating (General) - 12.75-Pound Steel Plate, Repair
18. Hull and Structural Plating (General) - 15.3-Pound Steel Plate, Repair
19. Hull and Structural Plating (General) - Degraded Weld (Steel), Repair
20. Voids (Non-Accessible), Leak Test
21. Voids (Non-Accessible), Internal Surfaces, Preserve
22. Handrails and Stanchions, Renew
23. Propeller, Perform Minor Repairs and Reconditioning
24. Propulsion Shafting, Remove, Inspect, and Reinstall
25. Propulsion Shaft Bearings (External), Check Clearances
26. Fixed Ballast (Lead Ingots), Reinstall in Containment Boxes
27. Head Bulkhead, Renew
28. Hull Plate, Inspection and Repair
29. Air Handler Unit, Renew
30. Deck Covering (Interior Wet/Dry), Renew
31. Stack Metal Plating, Repair
32. AC Unit Foundation Renew
33. Engine Room Plating Renew
34. Main Hold Plating Renew
35. Sewage Void Plating Renewal
36. Decks - Exterior, Preserve (Non-Skid Broadcast Grit - System)
37. Superstructure, Preserve - Partial

CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests to Nancy.M.Brinkman@uscg.mil The CD-ROM sets are available of all cutters and will be free of charge to contractors upon request. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc).

Quotes are due on or about July 11, 2014 at 10:00 a.m. Eastern Standard Time and may be sent via:

Email: nancy.m.brinkman@uscg.mil or mailed to:

US Coast Guard
SFLC/C&P2/IBCT
Attn: Nancy Brinkman
300 East Main Street, Suite 600
Norfolk, VA 23510-9102