Deburring and polishing machine

The Defense Logistics Agency Maritime Norfolk seeks one deburring and polishing machine for Norfolk Naval Shipyard, with quotes due July 17, 2026 and anticipated delivery June 11, 2027. This is a 100% small business set-aside under simplified acquisition procedures (FAR Part 13).

Place of performance is Portsmouth, Virginia. The machine must be new and include a rigid rectangular steel frame, sanding belt oscillation system with electronic photocell and safety microswitches, pressure units at front and rear, anti-wear steel feed table, closed-loop feed belt, motor variator drive unit with inverter control, vacuum plant system, and three working units comprising two 8-inch nominal diameter cylinders with sanding belts and one vertical cross brushing unit. Electrical systems must conform to NFPA 79 for 460 VAC, 3-phase, 60 Hz operation. The machine must feature an HMI control with 10-inch touchscreen capable of storing 200 programs, operate on pneumatic pressure not exceeding 90 PSI, and accommodate useful working widths of minimum 53 inches, longitudinal sanding belt length of 103 inches nominal, working thickness range of 0.032 to 6 inches, and variable feed speed of 10–50 FPM. A 6500 CFM wet dust collector with 304 stainless steel construction, 80-gallon tank, 15 HP minimum motor, and automatic water fill system is required. The machine must handle product dimensions ranging from maximum 2 inches by 2 inches by 0.250 inches to minimum 12 feet by 48 inches by 6 inches, process carbon steel and stainless steel from water jet, laser, plasma, and oxyacetylene deburring, and support two-shift daily operation with maximum weight capacity of 600 pounds.

The contractor must provide three complete technical manual sets, installation and electrical drawings within 60 days of contract award, on-site mechanical and electrical installation to original manufacturer tolerances, verification testing, operator and maintenance training for six personnel over five consecutive workdays, and a 12-month warranty against defects. Shipping is FOB Destination with all charges included in the quoted price. Evaluation uses Lowest Price Technically Acceptable criteria. NAICS code is 332812; PSC code is 3426. Contractor must register in SAM and possess a CAGE Code; payment is processed through WAWF by DFAS.