Custom Turbine and Shaft Manufacturing
Closed Solicitation Posted
- Solicitation number
- 80NSSC26929639Q
- Agency
-
Shared Services Center
National Aeronautics and Space Administration
- Responses due
- Set-aside
- 8(a) Sole Source
Opportunity facts
- NAICS code
- 332710 Machine Shops
- Place of performance
- United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
NASA's National Aeronautics and Space Administration Shared Services Center (NASA/NSSC) is procuring custom turbine and shaft manufacturing services, specifically precision-machined Inconel 718 turbine wheel and shaft components for the InRoDES rotating detonation rocket engine development program's turbopump testing. The procuring center is NASA/NSSC with performance to be located at NASA's Marshall Space Flight Center (MSFC) in Huntsville, Alabama. Key contract requirements include the fabrication of micro turbine blades, turbine wheels, and shaft assemblies from AMS-conforming Inconel 718 stock material with heat treatment per AMS 5664 specifications, manufacturing according to NASA-MSFC drawing MC34020-001, comprehensive traceability documentation of all manufacturing process steps, and detailed Coordinate Measuring Machine (CMM) inspection with CMMC Level 2 Certification and ISO 17025 calibration standards. Capabilities and qualifications will be evaluated solely to determine whether the procurement should proceed on a competitive basis, with the final decision remaining within the government's sole discretion. Interested organizations must submit written responses by April 13, 2026 at 3:00 p.m. Central Standard Time, with oral communications not acceptable.
This procurement is designated as an 8(a) sole source contract, with INTELLIGENT TOOL CORP of Concord, North Carolina identified as the sole provider currently anticipated to receive the award. The contract will be issued under FAR 13.106-1(b)(1)(i) authority using commercial item acquisition procedures under FAR Parts 12 and 13. The Statement of Work specifies delivery of one quantity of turbomachinery hardware assembly with turbine and shaft components, along with a deviation/nonconformance report and detailed inspection report. The period of performance runs from April 2026 through September 2026, with all deliverables to be shipped or hand-delivered to Marshall Space Flight Center, Building 4631, in Huntsville, Alabama. The NAICS classification is 332710 (Machine Shops), and the primary point of contact for this acquisition is McKenzie Hanson, Procurement Specialist, at McKenzie.M.Hanson@nasa.gov.
Notice text
Synopsis:
NASA/NSSC has a requirement for Custom Turbine and Shaft Manufacturing.
NASA/NSSC intends to issue a sole source contract to INTELLIGENT TOOL CORP 1151 Biscayne DR Concord, North Carolina 28027-8403 United States under the authority of FAR 13.106-1(b)(1)(i). It has been determined that INTELLIGENT TOOL CORP is the sole provider of Custom Turbine and Shaft Manufacturing.
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space Flight Center (MSFC).
The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13.
The NAICS Code for this procurement is 332710.
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 3:00 p.m. Central Standard Time on 4/13/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.
Oral communications are not acceptable in response to this notice.
NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html .
Primary Point of Contact:
McKenzie Hanson
Procurement Specialist
McKenzie.M.Hanson@nasa.gov
Files
| File | Type | Posted |
|---|---|---|
| SATPC0040760 Tab 04 4 SOW.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| ComposiCAD Gold 4 axes | Shared Services Center | No set-aside | |
| 2WG S-Band Rotary Joint | Shared Services Center | No set-aside | |
| Repair and replacement of existing MTS lab Equipment | Shared Services Center | No set-aside | |
| NASA NIOC Engineering Services | Shared Services Center | No set-aside | |
| High-precision X-ray beamline slits for integration into a custom-built X-ray reflectometer system | Shared Services Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity