Compact Infrared Polarimeter for Target Tracking in Clutter

Closed Solicitation Posted

Solicitation number
A16-130
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
PSC
AC12 National Defense R&D Services; Department Of Defense - Military; Applied Research
More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

Notice text

DoD SBIR topic A16-130

Component: ARMY

Command: SMDC

Phase: SBIR Program Phase I Action

Technology Areas: Electronics

Keywords: passive tracking; polarimeter; polarization imaging; target detection in clutter

Objective:

The U.S. Army has a need for advanced tracking capabilities in cluttered environments for high energy laser weapon systems. Current methodologies used include a passive wide field of view mid-wave infrared sensor. This solicitation is seeking innovative approaches to developing compact, lightweight polarimeters capable of measuring a full stokes vector. This is often referred to as a 3D polarimeter and includes horizontal and vertical linear polarization, linear polarization at +45 and -45 degrees, and right and left circular polarization. Mid-wave and long-wave infrared passive sensors are of interest. The system must be fast enough to track moving targets and detect a full Stokes vector at rates up to 200 Hz. Expected deliverables from a phase I effort include a design concept for implementing a snap shot polarimeter capable of detecting a full Stokes Vector with micropolarizers manufactured on a focal plane array. Phase II deliverables shall include a hardware prototype.

Description:

Polarization has been proven to enhance target detection in clutter with polarimeters. Use of the full Stokes vectors in polarimeters allows better identification in adverse weather conditions. This is difficult to implement because it requires horizontal and vertical linear polarization, linear polarization at +45 and -45 degrees, and right and left circular polarization for the same image. Tracking fast moving targets in tactical scenarios typically requires high frames rates (ex: 1kHz up to 4kHz). Polarimeters typically use single or multiple polarization filters in a rotation stage that collects different states of the same image before the image in the field of view of the sensor changes. Current rotating polarizers have proven insufficient for tracking fast moving targets in turbulent environments, where the scene is changing faster than the rate of the rotation stage. An alternative to using a rotation stage is to split the image into multiple cameras with a different polarization filters and wave retarders filtering light onto each camera. This method is costly and adds weight and size to the overall system. Additionally, the use of beam splitters and optical elements adds complexity to a rugged system.

Some efforts have been made to implement polarization filters directly on a focal plane array. This approach reduces size, weight, and power required for a typical high speed rotation stage and allow for higher speed detection of all polarization states of a single image. Issues with this implementation include a loss in total image resolution by using multiple pixels to detect different polarization states of the same image location. This technology shows promise, but requires additional robustness and proven capability to push forward to tactical systems.

Phase I:

Conduct research, analysis, and studies on the selected polarimeter architecture, develop measures of expected performance, and document results in a final report. Provide analysis supporting the method of polarimetry implementation and expected hardware performance. The phase I effort should include modeling and simulation results supporting performance claims. A preliminary concept and draft testing methodologies that can be used to demonstrate the polarimeter system proposed during the phase II effort shall also be produced.

Phase II:

During Phase II, a passive MWIR or LWIR polarimeter concept design will be completed. Selected components will be developed and tested to help verify the design concept. A prototype polarimeter is expected to be tested at a minimum level. Parameters to be verified include polarization detection accuracy, overall rate of image collection and Stokes vector measurements. The necessary data processing techniques used for tracking shall be included in the phase II development. Methods to push data processing to desired operational rates shall be addressed, if not met. The extinction ratio, pixel cross talk, and total noise of the sensor shall be addressed. The data, reports, and tested hardware will be delivered to the government upon the completion of the phase II effort.

Phase III:

There are many potential applications for high speed, lightweight polarimeters. Commercial and Military applications include tracking, remote sensing, weather radar, and astronomy. In phase III, a robust polarimeter capable of operating at high speeds shall be developed and field tested to prove target detection in clutter. Military funding for this phase III effort would be executed by the US Army Space and Missile Defense Technical Center as part of its Directed Energy research.

Files

File Type Posted
A16-130.pdf PDF

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors