Cloth, Plain Weave

PR: 0044631807

PGC: 11271

ITEM DESCRIPTION:

CLOTH, PLAIN WEAVE, GLASS, 14.5 OZ PER SQUARE

YARD MINIMUM, NATURAL (BOTH SIDES), FIRE

RESISTANT, 60 INCH WIDTH, TYPE I, CLASS 6.

ADDITIONAL INFORMATION FOR MIL-C-20079H:

.

NO ADDITIONAL INFORMATION FOLLOWS.

.

INTERIM CHANGES TO MIL-C-20079H:

.

PAGE 12

PARA. 4.4.1, LINE 6, AFTER '(SEE 4.4.1.1)';

ADD 'ANY PENETRATING DEFECT SHALL NOT BE

SCORED ON THE OPPOSITE SIDE.'.

.

PAGE 13 AND 14,

PARA. 4.4.1.1, DEFECTS IN ROLLS,

LINE 1, DELETE 'TABLES VII AND VIII' AND

SUBSTITUTE 'TABLES VI AND VII'.

LINE 5, DELETE '2.5' AND 6.5' AND SUBSTITUTE

'1.5' AND '4.0'.

LINE 7, DELETE '4.0' AND '10.0' AND

SUBSTITUTE '2.5' AND 6.5'.

LINE 8, DELETE '1.5' AND '6.5' AND SUBSTITUTE

'1.0' AND '4.0'; LINE 15, DELETE '4.0' AND

LINE 15, DELETE '4.0' AND SUBSTITUTE '2.5'.

.

PAGE 14,

PARA. 4.4.1.2 LENGTH OF ROLLS,

LINE 3 DELETE '4.0' AND SUBSTITUTE '2.5'.

.

PAGE 15,

PARA. 4.4.2.1 VISUAL DEFECTS,

LINE 3, DELETE '1.0' AND SUBSTITUTE '0.65'.

LINE 4, DELETE '6.5' AND SUBSTITUTE '4.0'.

.

PARA. 4.4.2.2 LENGTH (FOR A HOLDER),

LINE 3, DELETE '4.0' AND SUBSTITUTE '2.5'.

.

PARA. 4.4.2.3 NET WEIGHT (FOR A HOLDER)

LINE 5, DELETE '4.0' AND SUBSTITUTE '2.5'.

.

PARA. 4.5.1 CLOTH AND TAPE, LINE 7, AFTER

'IN NUMBER OF ROLLS.' ADD NEW SENTENCE,

'THE AQL FOR THESE CHARACTERISTICS SHALL BE

4.0'.

.

PARA. 4.5.2 THREAD, LINE 3, DELETE '6.5' AND

SUBSTITUTE '4.0'.

.

PAGE 18,

PARA. 4.6.11.2, SENTENCE 2, DELETE AND

SUBSTITUTE 'THE STANDARD SAMPLE SIZE SHALL BE

1/8 INCH IN THICKNESS. TAPES WIDER THAN 2

INCHES SHALL BE TRIMMED TO 2 INCHES'.

.

PAGE 21

PARA. 5.2.2, LINE 3, DELETE 'OR CLASS WEATHERRESISTANT'.

LINE 4, DELETE 'METHOD I' AND

SUBSTITUTE 'METHOD II'.

.

ADD NEW PARAGRAPH:

'5.2.2.1 WEATHER-RESISTANT GRADE FIBERBOARD

SHIPPING CONTAINER. WHEN SPECIFIED (SEE 5.1),

THE SHIPPING CONTAINER SHALL BE WEATHERRESISTANT.

BOX CLOSURES SHALL BE AS SPECIFIED

FOR METHOD III IN ACCORDANCE WITH THE APPENDIX

OF THE BOX SPECIFICATION.'.

.

ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS

HEREBY INACTIVE

FOR NEW DESIGN. WHEN NOT USIHNG FED-STD-191,

SEE INTERIM CHANGES END ITEM SPECIFICATION FOR

REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST

SENTENCE AND SUBSTITUTE: 'THE SPECIMEN SHALL BE

CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE

OUTER EDGE OF THE VISE, SUCH THAT ONE INCH OF

SPECIMEN LIES WITHIN THE CLAMP AND ONE INCH OF

THE SPECIMEN EXTENDS BEYOND THE CENTER OF

ROTATION (FACE OF THE VISE), AND WITH THE LONG

EDGE PARALLED TO THE FACE OF THE DIAL PLATE).

TEST METHOD 5309.1 ABRASION RESISTANCE OF

TEXTILE WEBBING.

PAGE 1, PARA 4.1.2,LINE 4: DELETE 'B-97' AND

SUBSTITUTE 'B-91'.

THE FOLLOWING METHODS ARE IDENTIFIED AS

SPECIFYING OZONE DEPLETING SUBSTANCES: 1100,

1200, 1240, 1400, 1410, 1500, 1510,1520,1530,

1540, AND 1550. PARA 5.1 OF THESE TEST METHODS

REQUIRE THE USE OF 1,1,1- TRICHLOROETHANE,

ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN

OZONE DEPLETING SUBSTANCE (METHYL CHLOROFORM)

AND IS THEREFORE PROHIBITED. THE USE OF EITHER

ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS

ARE IN BASIC OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL;

CANTILEVER BENDING METHOD. PAGE 2, PARA. 5.3

DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE

FOLLOWING: 'THE SPECIMEN SHALL BE CLAMPED

FIRMLY, WITH 1 END FLUSH WITH THE OUTER EDGE OF

THE VISE, SUCH THAT 1' OF THE SPECIMEN LIES

WITHIN THE CLAMP AND 1' OF THE SPECIMEN EXTENDS

BEYOND THE CENTER OF ROTATION (INNER FACE OF THE

VISE)

AND WITH THE LONG EDGE PARALLEL TO THE FACE OF

THE DIAL PLATE.'

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR

TEXTILE MATERIALS, PAGE 5, PARA. 5.2.2, LINE 8:

DELETE SENTENCE BEGINNING WITH 'THE SPECIMENS

AND BALLAST' IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: 'THE SPECIMENS AND BALLAST SHALL

BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN

A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF

140-180 DEG. F. THIS TEMPERATURE RANGE

CORRESPONDS TO A SETTING OF 'HIGH' ON THE

TEMPERATURE INDICATOR ON THE DRYER. DRYING

SHALL CONTINUE FOR 45-60 MINUTES OR UNTIL

SAMPLES ARE DRY IN A ROTATING TUMBLE DRYER.'

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE

BEGINNING WITH 'THE SPECIMENS AND BALLAST' IN

ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:

'THE SPECIMENS AND BALLAST SHALL BE SEPARATED,

OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED

DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG.

F. THIS TEMPERATURE RANGE CORRESPONDS TO A

SETTING OF 'HIGH' ON THE TEMPERATURE INDICATOR

ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40

MINUTES OR UNTIL SAMPLE ARE DRY.'

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS;

DETERMINATION OF PAGE 1, PARA. 3: AFTER 'NUMBER

OF DETERMINATIONS' ADD 'PER SAMPLE UNIT'. PAGE

1, PARA. 4: DELETE 'APPARTUS' AND SUBSTITUTE

'APPARATUS'. PAGE 1, PARA. 5.1, LINE 3: AFTER

'AT' DELETE 'APPROXIMATELY'.

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER 'OF'

ADD '+-'. LINE 6: AFTER 'TO' ADD '+-'.

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND

SUBSTITUTE WITH THE FOLLOWING: '5.3 MOUNT A

SPECIMEN TAUGHTLY ACROSS THE ELECTRODES,

CENTERING IT OVER THE SENSOR OPENING. THE

SURFACE OF THE TEST SPECIMEN (BACK OR FRONT)

SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE

RESIDUAL CHARGE LEVEL ON THE SAMPLE AS SEEN BY

THE SENSOR, INCLUDING POLARITY. NOTE THAT TEST

SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS

+500 VOLTS YIELD THE BEST RESULTS. APPLY +5000

VOLTS TO THE ELECTRODES FOR A PERIOD OF 20 SECS.

AT THE END OF THE 20 SECOND PERIOD, THE HIGH

VOLTAGE (5000 VOLTS) SHALL BE TURNED OFF AND THE

SPECIMENS IMMEDIATELY GROUNDED. THE VOLTAGE

BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME

SHALL BE PLOTTED ON THE RECORDER. NOTE: IN SOME

CASES, THE TEST EQUIPMENT WILL DISPLAY VOLTAGE

AND DECAY TIME INFORMATION AND A CHART RECORDER

IS NOT NECESSARY.'

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGIN

NING WITH 'IF THE SPECIMEN DID' IN ITS ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS

ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:

'RECORD THE MAXIMUM VOLTAGE LEVEL (INCLUDING

POLARITY) AND DECAY TIME TO 10% OF THE MAXIMUM

VOLTAGE LEVEL ACHIEVED.'

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING

PRIOR TO 1ST SENTENCE: 'REVERSE VOLTAGE POLARITY

REPEAT MEASUREMENT, AND RECORD RESULTS.'

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS

ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: 'THE

AVERAGE TIME TO DECAY TO 10% OF THE MAX VOLTAGE

SHALL BE INCLUDED FOR EACH OF THE WARP & FILLING

DIRECTIONS, AS WELL AS THE OVERALL AVERAGE, FOR

EACH FABRIC TESTED. THESE WILL BE OBTAINED BY

AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF)

TOGETHER FOR BOTH VOLTAGE POLARITIES. UNLESS

OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT,

THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THE

AVERAGE MAXIMUM VOLTAGE IN BOTH THE WARP AND

FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND

THE AVERAGE DECAY TIME (TO 10% MAX VOLTAGE) IS

GREATER THAN 0.5 SECONDS IN BOTH THE WARP AND

FILLING DIRECTIONS. IT SHALL BE INDICATED

WHETHER THE FABRIC IS ACCEPTABLE OR

NON-ACCEPTABLE.'

PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE

'406C' AND SUBSTITUTE WITH '406D'.

AFTER PARA. 7.1, ADD THE FOLLOWING: '

7.2 NOTE:

IF THE MODEL 406D STATIC DECAY METER, OR

EQUIVALENT, IS USED, A CHART RECORDER IS NOT

MANDATORY FOR THE TEST.'

ADDITIONAL INFORMATION FOR FED-STD-595C:

COPIES OF FED-STD-595 CAN BE OBTAINED FROM:

GENERAL SERVICES ADMINISTRATION - FEDERAL SUPPLY

SERVICE BUREAU

SPECIFICATION SECTION, SUITE 8100

470 EAST L'ENFANT PLAZA, SW

WASHINGTON, DC 20407

PHONE (202) 619-8925.

ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS

HEREBY INACTIVE FOR NEW DESIGN. WHEN NOT USING

FED-STD-191, SEE INTERIM CHANGES TO END ITEM

SPECIFICATION FOR REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST

SENTENCE AND SUBSTITUTE: 'THE SPECIMEN SHALL BE

CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE

OUTER EDGE OF THE VISE, SUCH THAT ONE INCH OF

SPECIMEN LIES WITHIN THE CLAMP AND ONE INCH OF

THE SPECIMEN EXTENDS BEYOND THE CENTER OF

ROTATION (FACE OF THE VISE), AND WITH THE LONG

EDGE PARALLEL TO THE FACE OF THE DIAL PLATE'.

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE

WEBBING. PAGE 1, PARA 4.1.2,LINE 4: DELETE

'B-97' AND SUBSTITUTE 'B-91'.

THE FOLLOWING METHODS ARE IDENTIFIED AS

SPECIFYING OZONE DEPLETING SUBSTANCES: 1100,

1200, 1240, 1400, 1410, 1500, 1510,1520,1530,

1540, AND 1550. PARA 5.1 OF THESE TEST METHODS

REQUIRE THE USE OF 1,1,1- TRICHLOROETHANE,

ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN

OZONE DEPLETING SUBSTANCE (METHYL CHLOROFORM)

AND IS THEREFORE PROHIBITED. THE USE OF EITHER

ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS

ARE IN BASIC OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL;

CANTILEVER BENDING METHOD. PAGE 2, PARA. 5.3

DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE

FOLLOWING: 'THE SPECIMEN SHALL BE CLAMPED

FIRMLY, WITH 1 END FLUSH WITH THE OUTER EDGE OF

THE VISE, SUCH THAT 1' OF THE SPECIMEN LIES

WITHIN THE CLAMP AND 1' OF THE SPECIMEN EXTENDS

BEYOND THE CENTER OF ROTATION (INNER FACE OF THE

VISE) AND WITH THE LONG EDGE PARALLEL TO THE

FACE OF THE DIAL PLATE.'

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR

TEXTILE MATERIALS, PAGE 5, PARA. 5.2.2, LINE 8:

DELETE SENTENCE BEGINNING WITH 'THE SPECIMENS

AND BALLAST' IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: 'THE SPECIMENS AND BALLAST SHALL

BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN

A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF

140-180 DEG. F. THIS TEMPERATURE RANGE

CORRESPONDS TO A SETTING OF 'HIGH' ON THE

TEMPERATURE INDICATOR ON THE DRYER. DRYING

SHALL CONTINUE FOR 45-60 MINUTES OR UNTILSAMPLES

ARE DRY IN A ROTATING TUMBLE DRYER.'

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE

BEGINNING WITH 'THE SPECIMENS AND BALLAST' IN

ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING:

'THE SPECIMENS AND BALLAST SHALL BE SEPARATED,

OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED

DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG.

F. THIS TEMPERATURE RANGE CORRESPONDS TO A

SETTING OF 'HIGH' ON THE TEMPERATURE INDICATOR

ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40

MINUTES OR UNTIL SAMPLES ARE DRY.'

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS;

DETERMINATION OF PAGE 1, PARA. 3: AFTER NUMBER

OF DETERMINATIONS ADD 'PER SAMPLE UNIT'. PAGE

1, PARA. 4: DELETE 'APPARTUS' AND SUBSTITUTE

'APPARATUS'. PAGE 1, PARA. 5.1, LINE 3: AFTER

'AT' DELETE'APPROXIMATELY'.

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER 'OF'

ADD '+-'. LINE 6: AFTER 'TO' ADD '+-'.

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND

SUBSTITUTE WITH THE FOLLOWING:'5.3 MOUNT A

SPECIMEN TIGHTLY ACROSS THE ELECTRODES,

CENTERING IT OVER THE SENSOR OPENING. THE

SURFACE OF THE TEST SPECIMEN (BACK OR FRONT)

SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE

RESIDUAL CHARGE LEVEL ON THE SAMPLE AS SEEN BY

THE SENSOR, INCLUDING POLARITY.

NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE

LEVELS OF LESS +500 VOLTS YIELD THE BEST

RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR

A PERIOD OF 20 SECS. AT THE END OF THE 20

SECOND PERIOD, THE HIGH VOLTAGE (5000 VOLTS)

SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY

GROUNDED. THE VOLTAGE BEHAVIOR OF THE SPECIMEN

WITH RESPECT TO TIME SHALL BE PLOTTED ON THE

RECORDER. NOTE: IN SOME CASES, THE TEST

EQUIPMENT WILL DISPLAY VOLTAGE AND DECAY TIME

INFORMATION AND A CHART RECORDER IS NOT

NECESSARY.'

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE

BEGINNING WITH 'IF THE SPECIMEN DID' IN ITS

ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS

ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:

'RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING

POLARITY) AND DECAY TIME TO 10% OF THE MAXIMUM

VOLTAGE LEVEL ACHIEVED.'

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING

PRIOR TO 1ST SENTENCE: 'REVERSE VOLTAGE POLARITY

REPEAT MEASUREMENT, ANDRECORD RESULTS.'

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS

ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: 'THE

AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE

SHALL BE INCLUDED FOR EACH OF THE WARP & FILLING

DIRECTIONS, AS WELL AS THE OVERALL AVERAGE, FOR

EACHFABRIC TESTED. THESE WILL BE OBTAINED BY

AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF)

TOGETHER FOR BOTH VOLTAGEPOLARITIES. UNLESS

OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT,

THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF

THEAVERAGE MAXIMUM VOLTAGE IN BOTH THE WARP AND

FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND

THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS

GREATER THAN 0.5 SECONDS IN BOTH THE WARP AND

FILLING DIRECTIONS. IT SHALL BE INDICATED

WHETHER THE FABRIC ISACCEPTABLE OR

NON-ACCEPTABLE.'

PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE

406C AND SUBSTITUTE WITH '406D'.

AFTER PARA. 7.1, ADD THE FOLLOWING: '7.2 NOTE:

IF THE MODEL 406D STATIC DECAY METER, OR

EQUIVALENT, IS USED, A CHART RECORDER ISNOT

MANDATORY FOR THE TEST.'

DEPARTMENT OF DEFENSE INDEX OF SPECIFICATIONS

AND STANDARDS.

PART I AND II, JULY 2000 AND SUPPLEMENT, MARCH

2000

INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE

WITH FAR PART 52.246-2 STANDARD INSPECTION.

ADDITIONAL INFORMATION FOR MIL-STD-105E:

NOTE: MIL-STD-105 HAS BEEN CANCELLED AND

REPLACED

BY THE FOLLOWING: 'AMERICAN NATIONAL STANDARDS

INSTITUTE (ANSI) ANSI/ASQC Z1.4 - SAMPLING

PROCEDURES AND TABLES FOR INSPECTION BY

ATTRIBUTES'.

APPLICATION FOR COPIES SHOULD BE OBTAINED FROM:

AMERICAN SOCIETY FOR QUALITY CONTROL

611 EAST WISCONSIN AVE

MILWAUKEE, WI 53202

MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF

DEFENSE STANDARD PRACTICE MILITARY MARKING FOR

SHIPMENT AND STORAGE - DATED

19 SEPTEMBER 2007

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING

CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C

&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN

THE NAME IDENTIFIES THE MATERIAL) SHALL BE

OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF

DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE

OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE

MATERIAL AS BEING CLOTHING, IT MAY REMAIN.

NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS

OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED

INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH

SHIPMENT. THE WORDS 'PACKING LIST HERE' SHALL BE

STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147 IS HEREBY REINSTATED AS FOLLOWS:

MIL-STD-147E DEPARTMENT OF DEFENSE

16 MAY 2008 STANDARD PRACTICE

PALLETIZED UNIT LOADS

STANDARDS (COMMERCIAL)

ASME-MH1 American Society of Mechanical

Engineers (ASME) Pallets, Slip Sheets, and Other

Bases For Unit Loads, for construction of

pallets.

ADDITIONAL INFORMATION FOR PPP-B-636:

FEDERAL SPECIFICATION PPP-B-636 DATED JULY 12,

1981, INCLUDING INTERIM FEDERAL SPECIFICATION

PPP-B-636L DATED JANUARY 1, 1991, IS HEREBY

CANCELLED, AND REPLACED WITH ASTM-D-5118,

STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD

SHIPPING BOXES, AND ASTM-D-1974, STANDARD

PRACTICE FOR METHOD OF CLOSING, SEALING AND

REINFORCING FIBERBOARD SHIPPING CONTAINERS.

ADDITIONAL INFORMATION FOR MIL-A-3316:

.

NO ADDITIONAL INFORMATION FOLLOWS.

.

ADDITIONAL INFORMATION FOR MIL-STD-2073-1:

NO ADDITIONAL INFORMATION FOLLOWS

STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS

IDENTIFIED AS ROLL #3746. FOLIAGE GREEN 504

IS TO BE USED AS SPECIFIED BY CONTRACT. THIS

APPLIES TO TYPE II, CLASS 1 ONLY.

CRITICAL APPLICATION ITEM

I/A/W STD NR FED-STD-191A(6) NOT 7

REFNO

AMEND NR A DTD 2006 OCT 03

TYPE NUMBER:

I/A/W STD NR FED-STD-595C(1)

REFNO

AMEND NR C DTD 2006 OCT 03

TYPE NUMBER:

I/A/W SPEC NR MIL-A-3316C(2)

REFNO

AMEND NR 2 DTD 2006 OCT 02

TYPE NUMBER:

I/A/W SPEC NR MIL-C-20079H

BASIC

AMEND NR H DTD 2006 OCT 03

TYPE NUMBER:

I/A/W STD NR MIL-STD-105E NOT 3

REFNO

AMEND NR E DTD 2006 OCT 03

TYPE NUMBER:

I/A/W STD NR MIL-STD-129P(4)

REFNO

AMEND NR P DTD 2006 OCT 03

TYPE NUMBER:

I/A/W STD NR MIL-STD-147E

REFNO

AMEND NR E DTD 2006 OCT 03

TYPE NUMBER:

I/A/W SPEC NR PPP-B-636J

REFNO

AMEND NR J DTD 2006 OCT 03

TYPE NUMBER: