Chain Fall Load Testing and Cleaning Services
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- N6449823Q5011
- Agency
-
Naval Sea Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Place of performance
- Philadelphia, Pennsylvania 19112, United States
Notice details come from SAM.gov. Updated .
Notice text
2 versions
Update #2 · Latest ·
1. The Naval Foundry and Propeller Center (NFPC) requires outside vendor support to provide annual inspection and load testing of the facility’s seventy nine (79) chain falls ranging in size from ½ Ton thru 30 Ton capacities. All work must be completed in accordance with NAVFAC P-307 and ASME B30.16, Chapter 16-2.2.2. Each hoist shall be load tested to 125 % of rated capacity and held for a minimum of 10 minutes and properly annotated on load testing paperwork. The certification paperwork must accompany the chain fall upon return to the Naval Foundry and Propeller Center.
2. This acquisition will be accomplished using Simplified Acquisition Procedures.
3. This acquisition is a 100% Small Business Set Aside under NAICS Code 810310. The Small Business Office concurs with the set-aside decision.
4. The Request for Quotation (RFQ) is due on or before 1200 ET, 11/22/2022 and all required documents shall be emailed to thomas.c.coletti.civ@us.navy.mil
5. All questions pertaining to the RFQ shall be emailed to thomas.c.coletti.civ@us.navy.mil no later than 1200 ET,11/7/2022. Questions received after this time may not be accepted.
6. The contractor shall be registered in System for Award Management (SAM) in order to be eligible for award.
Update #1 ·
1. The Naval Foundry and Propeller Center (NFPC) requires outside vendor support to provide annual inspection and certification of the facility’s seventy nine (79) chain falls ranging in size from ½ Ton thru 30 Ton capacities. All work must be completed in accordance with NAVFAC P-307 and ASME B30.16, Chapter 16-2.2.2. Each hoist shall be load tested to 125 % of rated capacity and held for a minimum of 10 minutes and properly annotated on certification paperwork. The certification paperwork must accompany the chain fall upon return to the Naval Foundry and Propeller Center.
2. This acquisition will be accomplished using Simplified Acquisition Procedures.
3. This acquisition is a 100% Small Business Set Aside under NAICS Code 333923. The Small Business Office concurs with the set-aside decision.
4. The Request for Quotation (RFQ) is due on or before 1200 ET, 11/15/2022 and all required documents shall be emailed to thomas.c.coletti.civ@us.navy.mil
5. All questions pertaining to the RFQ shall be emailed to thomas.c.coletti.civ@us.navy.mil no later than 1200 ET,11/7/2022. Questions received after this time may not be accepted.
6. The contractor shall be registered in System for Award Management (SAM) in order to be eligible for award.
Files
| File | Type | Posted |
|---|---|---|
| Chain Fall Solicitation Question 6.docx | DOCX document | |
| N6449823Q5011-0001 conformed copy.pdf | ||
| N6449823Q5011-0001.pdf | ||
| Chain Fall Solicitation Questions 1-5.docx | DOCX document | |
| Request for Quote (RFQ) N6449823Q5011.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Chain Fall Load Testing and Cleaning Services | Award Notice | |
| This notice | Solicitation | |
| Chain Fall Calibration and Cleaning Services | Pre-Solicitation |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity