CGSC - Electronic Key Control

Salient Characteristics
September 04, 2018
CGSC - Electronic Key Control

1. Key box which has access control governed by DA approved software which communicates with the key box via Ethernet network connection. The key box needs to have coded access to the box and 48 hour backup power supply. The keys need to be locked in the box with only one key ring being able to be removed based upon the users input and request for key issue, all other key rings need to remain locked.
The Key box / DA approved access control system must have a tamper-proof mechanism that triggers an alarm if:
• A user tries to gain access to or dislodge a key with force
• An invalid User Code is entered three times consecutively (systems go into an automatic alert mode and lock down for four minutes)
• The door is left open for more than 10 seconds after use
• A key is missing or not returned on time
• There is a power failure
• A key is returned by the wrong user
• A user forces the cabinet doors open
2. The Key box system shall include a tamper-proof key control system. With the door to the box open a person shall not be able to remove a key except for the key which that person is entitled to.

3. The DA approved software for the key control system shall control access to the key box remotely/through the network, allow access and establish permissions at various levels. The system must generate an audit trail for all keys. The system must also provide audible alarm notification and priority e-mail alert.
4. The key control system must include tamper-proof key rings of various sizes with additional purchase options.

.