CCC Controllers
Closed Pre-Solicitation Posted
Not the latest version. See the latest special notice from .
- Solicitation number
- FA9101-21-Q-0041
- Agency
-
Air Force Test Center
Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Air Force Materiel Command Test Center is seeking capability statements for the design and supply of a replacement compressor antisurge and performance control system for 12 axial flow compressors at the Arnold Engineering Development Center Propulsion Wind Tunnel Plenum Evacuation System. Interested parties must submit no more than 10 pages demonstrating their ability to supply new controllers for each compressor to perform antisurge protection and performance optimization interfacing with existing instrumentation and controls. Capability statements are due by April 16, 2021 and should outline how offerors would obtain required items through vehicles such as a GSA schedule.
There is no set-aside designation for this pre-solicitation notice. The anticipated NAICS code is 334110 and PSC code is J063. The replacement control system must be designed, integrated and verified on-site with configuration software and documentation provided. The government estimates supplying 12 new controllers to be installed and commissioned at Arnold Air Force Base with requirements for system interfaces, security, performance characteristics, submittals and warranty.
Notice text
The scope of this procurement is for the contractor to design and supply all hardware and software for a replacement compressor antisurge and performance control system. The system shall control 12 axial flow compressors which comprise the Arnold Engineering Development Center (AEDC) Propulsion Wind Tunnel (PWT) Plenum Evacuation System (PES). The Contractor shall supply new controllers for each of the compressors to perform performance control and compressor antisurge protection. The compressor antisurge and performance control system shall interface with existing process control instrumentation, existing control valves, and with an existing GE Rx3i PES Supervisory Controller. The Government/AEDC will install the hardware. The Contractor shall commission and checkout the control system at Arnold Air Force Base, TN.
Files
Notice history
| Notice | Type | Posted |
|---|---|---|
| CCC Controllers - Justification | Limited / Sole Source Justification | |
| CCC Controllers - NOCA | Special Notice | |
| This notice | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| C-130, C-17 and C-5 Solid State Cockpit Voice Recording (SSCVR) and Solid-State Flight Data Recorder (SSFDR) and Amplifier Control Unit (ACU) | Air Force Sustainment Center | No set-aside | |
| KC-135 Center Console Refresh (CCR) Revision 2 | AFLCMC Tinker AFB | No set-aside | |
| Control unit, superv | Aviation | No set-aside | |
| FD2030-26-00991 | Aviation | No set-aside | |
| Compressor unit | ACC Redstone | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity