Casper Mtn East Microwave Bldg and Generator Addn

For the full text of this solicitation, please open the package(s) attached to this FBO announcement or visit the FedConnect link and open the attachment(s) in FedConnect. The following is summary of work contemplated under this solicitation.

Work is located at Casper Mountain East ¿ Radio Relay Station complex, in Natrona County, approximately 10 miles south of Casper, Wyoming. The Radio Relay Station complex is located approximately 600 yards east of State Route 251 and 40 yards south of Towerhill Campground Road (Route 506) at an approximate elevation of 8,100 feet.

The principal components of work to be performed include the following:

1. Remove existing 17 foot by 8 foot corrugated metal building.

2. Prepare site for installation of 20 foot by 20 foot prefabricated concrete building including an adequate building foundation, designed by the Contractor, with a minimum of 12¿ of compacted gravel.

3. Furnish all materials and perform all work required to install new 20 foot by 20 foot two-room prefabricated concrete building.

4. Install double gate in chain link fence to align with prefabricated buildings double doors.

5. Disconnect and remove existing 15kW generator.

6. Furnish all materials and perform all work required to install a new 35kW generator and automatic transfer switch, to provide emergency backup power to the site.

7. Disconnect and remove existing fuel tank and associated gas lines.

8. Furnish all materials and perform all work required to install a new 500 gallon fuel tank.

9. Install electrical power distribution panels, breakers, cables, and service entrance so that utility power comes through the new building with automatic emergency backup generator controlled by automatic transfer switch.

TYPE OF CONTRACT:

This requirement is solicited as a/an Request for Proposal (RFP) using the Federal Acquisition Regulation Part 15 - Contracting by Negotiation. The Bureau of Reclamation anticipates the award of a Firm Fixed Price contract.

MAGNITUDE OF PROJECT:

Between $250,000 and $500,000

METHOD OF SUBMISSION OF PROPOSALS:

See Section L of this Solicitation.

BUSINESS SIZE COMPETITION REQUIREMENTS:

This acquisition is solicited as a total small business set-aside.

NORTH AMERICAN INDUSTRIAL CLASSIFICATION SYSTEM (NAICS) CODE:

236220 ¿ Commercial and Institutional Building Construction

PRE-PROPOSAL SITE VISIT: a pre-proposal site visit will be held on 8/13/2019, Casper Mountain East ¿ Radio Relay Station complex, beginning at 10:00 a.m. local time. Prospective offerors interested in attending the pre-proposal site visit should contact Mr. Jeremy Gillespie at the email jgillespie@usbr.gov or telephone number (406)247-7817. Attendees shall bring and wear personal protective equipment (PPE), including safety boots, hard hats, safety vests, safety glasses, and hearing protection.

For date and place proposals are due, see Solicitation, Offer, and Award, Standard Form 1442.

POINT OF CONTACT:

The point of contact is Mr. Jeremy Gillespie, Contract Specialist. All questions and correspondence concerning this solicitation should be submitted via email to jgillespie@usbr.gov.

Please see the FedConnect link and open the attachment in FedConnect for full text of this notice. The following is summary of work contemplated under the forthcoming solicitation. 1. Remove existing 17 foot by 8-foot corrugated metal building. 2. Prepare site for installation of 20 foot by 20-foot prefabricated concrete building including an adequate building foundation, designed by the Contractor, with a minimum of 12¿ of compacted gravel. 3. Furnish all materials and perform all work required to install new 20 foot by 20 foot two-room prefabricated concrete building. 4. Install double gate in chain link fence to align with prefabricated buildings double doors. 5. Disconnect and remove existing 15kW generator. 6. Furnish all materials and perform all work required to install a new 35kW generator and automatic transfer switch, to provide emergency backup power to the site. 7. Disconnect and remove existing fuel tank and associated gas lines. 8. Furnish all materials and perform all work required to install a new 500-gallon fuel tank. 9. Install electrical power distribution panels, breakers, cables, and service entrance so that utility power comes through the new building with automatic emergency backup generator controlled by automatic transfer switch.