Exhibits SPMYM327Q7006.pdf

PDF 767 KB Posted

Attached to
Cap Screws
Solicitation number
SPMYM327Q7006
Issued by

About this file

This document is a Contract Data Requirements List (CDRL) establishing data submission requirements across multiple contract line items for fastener products supplied to a federal agency.

The CDRL covers thirteen contract line items (CLINs 0002, 0004, 0006, 0009, 0010, 0012, 0014, 0016, 0018, 0020, 0022, 0024, 0026, 0028) for various hex head capscrews, socket head cap screws (SHCS), flat head self-locking machine screws, and cap screws under contract SPMYM327Q7006. All items are assigned to Requiring Office CODE 245. For each CLIN, vendors must submit two data items: (1) a Certificate of Compliance (Certification of Quality Compliance) per DI-MISC-81356A, referencing Section C.2 of the contract; and (2) Certification Data/Report (Chemical & Mechanical Certification) per DI-MISC-82386, referencing Section C.3. All submissions must be made with material delivery on a one-time basis. Certifications must include actual test results for all chemical and mechanical tests specified, with quantitative results in units required by specification. Fastener certification must demonstrate testing of the correct number of specimens, with new untested fasteners required for each wedge tensile testing and yield strength testing instance. Test data shall be submitted under separate shipment numbers and are subject to payment clauses 252.232-7006, 252.232-7003, or 52.232-36. The CDRL was prepared between July 14, 2026 and July 28, 2026, and approved on October 28-30, 2026.

View the file

Other files

File Type Posted
Clauses - Full Text Provisions and Clauses 11-4-2026.docx DOCX document
RFQ SPMYM327Q7006.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

CONTRACT DATA REQUIREMENTS LIST

245.2O-1121-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. 0002 B. EXHIBIT

A

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

HEX HEAD CAPSCREWS

E. CONTRACT/PR NO

62744001/SPMYM327Q7006

F. CONTRACTOR

1. DATA ITEM NO.

A001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

A002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

MICHAEL OBRIEN Ext: 0546 245.2O

H. DATE

07/14/2026

I. APPROVED BY 245.

R e c o v e r a b l e S i g n a t u r e

X J a s o n L a f l a m m e

S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d

J. DATE

10/28/26

A. CONTRACT LINE ITEM NO. 0004 B. EXHIBIT

B

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

HEX HEAD CAPSCREWS

E. CONTRACT/PR NO.

62744002/SPMYM327Q7006

F. CONTRACTOR

1. DATA ITEM NO.

B001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

B002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

MICHAEL OBRIEN Ext: 0546 245.2O

H. DATE

07/14/2026

I. APPROVED BY 245.

R e c o v e r a b l e S i g n a t u r e

X J a s o n L a f l a m m e

S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d

A. CONTRACT LINE ITEM NO. 0006 B. EXHIBIT

C

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

HEX HEAD CAPSCREWS

E. CONTRACT/PR NO. 627440003/

SPMYM327Q7006

F. CONTRACTOR

1. DATA ITEM NO.

C001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

C002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

MICHAEL OBRIEN Ext: 0546 245.2O

H. DATE

07/14/2026

I. APPROVED BY 245.

R e c o v e r a b l e S i g n a t u r e

X J a s o n L a f l a m m e

S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d

A. CONTRACT LINE ITEM NO. 0009 B. EXHIBIT

D

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

HEX HEAD CAPSCREWS

E. CONTRACT/PR NO. 62744051/

SPMYM327Q7006

F. CONTRACTOR

1. DATA ITEM NO.

D001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

D002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

MICHAEL OBRIEN Ext: 0546 245.2O

H. DATE

07/14/2026

I. APPROVED BY 245.

R e c o v e r a b l e S i g n a t u r e

X J a s o n L a f l a m m e

S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d

A. CONTRACT LINE ITEM NO. 0010 B. EXHIBIT

E

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

HEX HEAD CAPSCREWS

E. CONTRACT/PR NO.

6274405/SPMYM327Q7006

F. CONTRACTOR

1. DATA ITEM NO.

E001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

E002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

MICHAEL OBRIEN Ext: 0546 245.2O

H. DATE

07/14/2026

I. APPROVED BY 245.

R e c o v e r a b l e S i g n a t u r e

X J a s o n L a f l a m m e

S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d

A. CONTRACT LINE ITEM NO. 0012 B. EXHIBIT

F

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

HEX HEAD CAPSCREWS

E. CONTRACT/PR NO. 62744053/

SPMYM327Q7006

F. CONTRACTOR

1. DATA ITEM NO.

F001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

F002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

MICHAEL OBRIEN Ext: 0546 245.2O

H. DATE

07/14/2026

I. APPROVED BY 245.

R e c o v e r a b l e S i g n a t u r e

X J a s o n L a f l a m m e

S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d

245.2I-1122-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. 0014 B. EXHIBIT

G

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

SHCS

E. CONTRACT/PR NO. 62744071/

SPMYM327Q7006

F. CONTRACTOR

1. DATA ITEM NO.

G001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

G002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

JUSTIN TANGUAY Ext: 0546 245.2I

H. DATE

7/21/2026

I. APPROVED BY 245.

R e c o v e r a b l e S i g n a t u r e

X J a s o n L a f l a m m e

S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d

10/29/26

245.2C-1173-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. 0016 B. EXHIBIT

H

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

FLAT HEAD 82 DEGREE SLF LKG

MACHINE SCREW, & HEX HEAD CAP

SCREW

E. CONTRACT/PR NO.

62744141/SPMYM327Q7006

F. CONTRACTOR

1. DATA ITEM NO.

H001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

H002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 AND 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical & Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC-82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

CONRAD GAGNE Ext: 6797 245.2C

H. DATE

07/21/2026

I. APPROVED BY 245.2

R e c o v e r a b l e S i g n a t u r e

X J a s o n L a f l a m m e

S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d

10/30/26

245.2C-1173-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO . 0018 B. EXHIBIT

I

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

FLAT HEAD 82 DEGREE SLF LKG

MACHINE SCREW, & HEX HEAD CAP

SCREW

E. CONTRACT/PR NO.

62744142 /SPMYM327Q7006

F. CONTRACTOR

1. DATA ITEM NO.

I001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

I002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 AND 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical & Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC-82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

CONRAD GAGNE Ext: 6797 245.2C

H. DATE

07/21/2026

I. APPROVED BY 245.2

R e c o v e r a b l e S i g n a t u r e

X J a s o n L a f l a m m e

S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d

10/30/26

245.2I-1172-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. 0020 B. EXHIBIT

J

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

CAP SCREWS

E. CONTRACT/PR NO.

62744191/SPMYM327Q7006

F. CONTRACTOR

1. DATA ITEM NO.

J001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

J002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

JUSTIN TANGUAY Ext: 0546 245.2I

H. DATE

7/23/2026

I. APPROVED BY 245.

R e c o v e r a b l e S i g n a t u r e

X J a s o n L a f l a m m e

S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d

245.2I-1172-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

CAP SCREWS

E. CONTRACT/PR NO.

62744192

F. CONTRACTOR

1. DATA ITEM NO.

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 82386, the requirements of the contract section titled, Marking and

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

JUSTIN TANGUAY Ext: 0546 245.2I

H. DATE

7/23/2026

I. APPROVED BY 245.

R e c o v e r a b l e S i g n a t u r e

X J a s o n L a f l a m m e

S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d

245.2I-1210-26 (2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. 0024 B. EXHIBIT

L

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

CAP SCREWS

E. CONTRACT/PR NO.

62744291/SPMYM327Q7006

F. CONTRACTOR

1. DATA ITEM NO.

L001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

L002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

JUSTIN TANGUAY Ext: 0546 245.2I

H. DATE

7/28/2026

I. APPROVED BY 245.

R e c o v e r a b l e S i g n a t u r e

X J a s o n L a f l a m m e

S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d

A. CONTRACT LINE ITEM NO. 0026 B. EXHIBIT

M

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

CAP SCREWS

E. CONTRACT/PR NO.

62744292/SPMYM327Q7006

F. CONTRACTOR

1. DATA ITEM NO.

M001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

M002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

JUSTIN TANGUAY Ext: 0546 245.2I

H. DATE

7/28/2026

I. APPROVED BY 245.

R e c o v e r a b l e S i g n a t u r e

X J a s o n L a f l a m m e

S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d

A. CONTRACT LINE ITEM NO. 0028 B. EXHIBIT

N

C. CATEGORY

TDP X TM ______ OTHER______

D. SYSTEM/ITEM

CAP SCREWS

E. CONTRACT/PR NO.

62744293/SPMYM327Q7006

F. CONTRACTOR

1. DATA ITEM NO.

N001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

N002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-82386

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical &

Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY

JUSTIN TANGUAY Ext: 0546 245.2I

H. DATE

7/28/2026

I. APPROVED BY 245.

R e c o v e r a b l e S i g n a t u r e

X J a s o n L a f l a m m e

S i g n e d b y : 2 7 b 4 0 5 c 8 - a 3 b 7 - 4 e 9 d - 8 c 8 f - 3 b 5 3 e d e 2 5 c 8 d

EXHIBIT K.1
Exhibits SPMYM327Q7006
EXHIBIT A
EXHIBIT B
EXHIBIT C
EXHIBIT D
EXHIBIT E
EXHIBIT F
EXHIBIT G
EXHIBIT H
EXHIBIT I
EXHIBIT J
EXHIBIT L
EXHIBIT M
EXHIBIT N

File details come from the government source that posted it. Updated .