Calibration services for materials laboratory, sevierville, TN
Closed Solicitation Posted
- Solicitation number
- 693C73243Q000002
- Agency
-
Federal Highway Administration
Department of Transportation
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 541380 Testing Laboratories and Services
- PSC
- H399 Inspection- Miscellaneous
Notice details come from SAM.gov. Updated .
About this opportunity
The Eastern Federal Lands Highway Division of the Federal Highway Administration seeks to procure calibration services meeting ISO/IEC 17025 requirements for its AASHTO accredited materials laboratory located in Sevierville, Tennessee. The solicitation requires that service providers be ISO/IEC 17025 and AAP/AASHTO R18 accredited, and capable of providing equipment, tools, materials, and trained technicians to perform calibration, standardization, or check work during two scheduled on-site visits. Quotations must be submitted by November 24, 2023 to be considered for award.
The solicitation carries no set-aside designations. The primary NAICS code is 541380 and PSC code is R425. Services will be performed at the agency's materials laboratory in Sevierville, Tennessee, and include annual calibration and certification of over 80 pieces of laboratory equipment used to test materials for highway construction projects in accordance with AASHTO, ASTM, and ISO standards. The period of performance is one year from date of award.
Notice text
THE EASTERN FEDERAL LANDS HIGHWAY DIVISION (EFLHD), OF THE FEDERAL HIGHWAY ADMINISTRATION (FHWA), INTENDS TO PROCURE CALIBRATION SERVICES MEETING THE ISO/IEC 17025 REQUIREMENTS FOR THE AASHTO ACCREDITED EFLHD MATERIALS LABORATORY LOCATED IN SEVIERVILLE, TENNESSEE.
THE EFLHD MATERIALS LABORATORY IS AAP/AASHTO R18 AND ISO 17025 ACCREDITED. FOR OUTSIDE CALIBRATION SERVICES TO BE UTILIZED BY AN ISO 17025 ACCREDITED LABORATORY, AASHTO/AMRL REQUIRES THE CALIBRATION SERVICE PROVIDER ALSO BE ISO 17025 ACCREDITED. ALL PROSPECTIVE PROVIDERS MUST BE AAP/AASHTO R18 AND ISO/IEC 17025 ACCREDITED, AND THEIR ACCREDITATIONS MUST MEET THE REQUIREMENT SET FORTH BY AASHTO/AMRL.
THE PROVIDER MUST COMPLY WITH THE REQUIREMENTS OF ISO/IEC 17025 AND MUST BE ACCREDITED THROUGH AN ACCREDITATION (NACLA) OR THE INTERAMERICAN ACCREDITATION COOPERATION (IAAC). THE PROVIDER MUST BE FAMILIAR WITH THE REQUIREMENTS OF AASHTO R18 AND MUST EITHER HAVE AN AASHTO ACCREDITED LABORATORY, OR HAVE PROVIDED CALIBRATION SERVICES TO AN AASHTO ACCREDITED LABORATORY. CALIBRATION WORK MUST CONFORM TO THE MOST CURRENT PUBLISHED STANDARD OF AASHTO R18 AND DESIGNATED AS CALIBRATION, STANDARDIZATION, OR CHECK (C/S/C) WORK. THE PROVIDER WILL FURNISH EQUIPMENT, TOOLS, AND MATERIALS, AS WELL AS THE TRAINED QUALIFIED TECHNICIAN(S) TO PERFORM THE C/S/C WORK. THE C/S/C WORK WILL BE PERFORMED IN TWO SCHEDULED ON-SITE SERVICE CALLS.
ALL RESPONSIBLE SOURCES MAY SUBMIT A QUOTATION WHICH, IF RECEIVED TIMELY, WITHIN 15 DAYS OF THE POSTED DATE, SHALL BE CONSIDERED BY THE AGENCY.
Files
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity