Calibrated Shaft Taper Analysis Verification Evaluation (STAVE) artifacts
Closed Solicitation Posted
- Solicitation number
- N0016724Q0022
- Agency
- Naval Sea Systems Command Department of the Navy, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541330 Engineering Services
- PSC
- 3412 Broaching Machines
- Place of performance
- Portsmouth, Virginia 23709, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Naval Surface Warfare Center Carderock Division seeks to procure four calibrated Shaft Taper Analysis Verification Evaluation artifacts from Propulsor Technology, Inc. on a sole source small business set aside basis. The artifacts must provide a minimum 23 inch inspection surface, have an outer diameter no less than 18.5 inches, and include keyways or keyway slots at least 1.75 inches wide by 0.25 inches deep. Interested parties may submit capability statements by November 2, 2023 as set forth in solicitation N0016724Q0022.
This requirement has a total small business set aside designation. The primary NAICS code is 541330 for physical, engineering, and scientific consulting services with a size standard of $25.5 million. Propulsor Technology, Inc. is the anticipated contractor for four artifacts to be provided to each of four U.S. Navy shipyards within 30 days of order for use in certifying STAVE shaft taper inspection systems. Place of performance will be at the destination shipyards located in Portsmouth, Virginia.
Notice text
This is a combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. Naval Surface Warfare Center Carderock Division (NSWCCD) intends to solicit only one source under the authority of FAR Part 13.106-1(b) the Contracting Officer has determined that circumstances of the contract action deem only one source reasonably available. The Government intends to solicit Propulsor Technology, Inc. for: four (4) calibrated Shaft Taper Analysis Verification Evaluation (STAVE) artifacts,as detailed in the attached solicitation. This solicitation is a sole source, small business set-aside. This announcement constitutes the only solicitation and a written solicitation will not be issued. Quotes are being requested under Request for Quotation (RFQ) no.N0016724Q0022. The NAICS code is 541330 and the business size standard is$25.5M.
Attachments
| File | Type | Posted |
|---|---|---|
| Combined Synopsis_Solicitation N0016724Q0022.pdf | ||
| Minimum Requirements - PTI.pdf |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity