Blast Media Lease and Recycle

Added: Jun 10, 2015 8:39 am Solicitation posted 10-Jun-15. Responses due by 10-Jul-15, 3:00PM CST.

Added: Mar 11, 2015 9:49 am

52.209-1 QUALIFICATION REQUIREMENTS (FEB 1995)

(a) Definition: "Qualification requirement," as used in this clause, means a Government requirement for testing or other quality assurance demonstration that must be completed before award.

(b) One or more qualification requirements apply to the supplies or services covered by this contract. For those supplies or services requiring qualification, whether the covered product or service is an end item under this contract or simply a component of an end item, the product, manufacturer, or source must have demonstrated that it meets the standards prescribed for qualification before award of this contract. The product, manufacturer, or source must be qualified at the time of award whether or not the name of the product, manufacturer, or source is actually included on a qualified products list, qualified manufacturers list, or qualified bidders list. Offerors should contact the agency activity designated below to obtain all requirements that they or their products or services, or their subcontractors or their products or services, must satisfy to become qualified and to arrange for an opportunity to demonstrate their abilities to meet the standards specified for qualification.

Technical Order (T.O.) 1B-1B-6WS-1
(Name) Mr. Brian Koehl
(Address) Brian.Koehl@us.af.mil
(Phone) 405-736-7496

Tinker AFB Blast Media Recycling
(Name) Ms. Van Nguyen
(Address) thanhvan.nguyen.1@us.af.mil
(Phone) 405-582-4802

(c) If an offeror, manufacturer, source, product or service covered by a qualification requirement has already met the standards specified, the relevant information noted below should be provided.

Offeror's Name
Manufacturer's Name
Source's Name
Item Name
Service Identification
Test Number (to the extent known)

(d) Even though a product or service subject to a qualification requirement is not in itself an end item under this contract, the product, manufacturer, or source must nevertheless be qualified at the time of award of this contract. This is necessary whether the Contractor or a subcontractor will ultimately provide the product or service in question. If, after award, the Contracting Officer discovers that an applicable qualification requirement was not in fact met at the time of award, the Contracting Officer may either terminate the contract for default or allow performance to continue if adequate consideration is offered and the action is determined to be otherwise in the Government's best interests.

(e) If an offeror, manufacturer, source, product, or service has met the qualification requirement but is not yet on a qualified products list, qualified manufacturers list, or qualified bidders list, the offeror must submit evidence of qualification prior to award of this contract. Unless determined to be in the Government's interests, award of this contract shall not be delayed to permit an offeror to submit evidence of qualification.

(f) Any change in location or ownership of the plant where a previously qualified product or service was manufactured or performed requires reevaluation of the qualification. Similarly, any change in location or ownership of a previously qualified manufacturer or source requires reevaluation of the qualification. The reevaluation must be accomplished before the date of award.

(End of clause)

Added: Feb 13, 2015 1:41 pm The US Air Force intends to award an Indefinite Delivery Indefinite Quantity (IDIQ) contract for nonpersonal service to provide Tinker Air Force Base, OK the following support:

Contractor shall provide labor, equipment, material, facilities, transportation, and any incidentals necessary to provide a lease for Blast Media used in de-painting and removing corrosion as needed from aircraft, aircraft component parts, aerospace vehicles, and aerospace ground equipment.

Contractor shall provide for the delivery and removal of Blast Media from Tinker AFB and shall recycle it in a manner that will prevent it from being considered a solid waste or hazardous waste. The performance period shall include a basic year and four one (1) year options.

Pursuant to FAR 6.302-1, award will be sole sourced to U.S. Technology Corporation, CAGE Code 1AM56, 4200 Munson Street NW, Canton OH 44718. They are the only approved contractor to manufacture, recycle, and support all types of blast media required by Tinker AFB. IAW Technical Order (T.O.) 1B-1B-6WS-1, only U.S. Technology Corporation’s product, Magic II Media, 30/60 mesh size: qualified to MIL-P-85891, Type VIII, may be used to strip the B-1.