Automated Digital Flatbed Cutting and Routing Equipment

Open Pre-Solicitation Posted

Solicitation number
FA487727QA028
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

Place of performance
Tucson, Arizona 85707, United States

Notice details come from SAM.gov. Updated .

About this opportunity

The 355th Contracting Squadron, under the Department of the Air Force Air Combat Command, is conducting market research through a Sources Sought Notice to identify capable businesses that can provide two automated digital flatbed cutting and routing systems, Colex Sharpcut Pro or Equal, with responses due November 25, 2026 at 8:00 AM MST. The notice states it is not a solicitation, and the set-aside line reads "No Set-Aside Used." Responses go by email to Contracting Officer Patricia Murray at patricia.murray.6@us.af.mil and must include the completed Attachment 1 Vendor Capability Questionnaire.

Delivery is F.O.B. Destination to Davis-Monthan AFB, Arizona 85707. System 1 requires a minimum active cutting area of 120 inches by 60 inches, with automated board feeding and pallet-table or equivalent continuous-loading capability. System 2 requires a minimum active cutting area of 80 inches by 124 inches. Both systems require motorized conveyor beds, vacuum hold-down, and cutting, routing, creasing, and marking for rigid and flexible packaging and preservation materials. Tooling and software/workflow must be compatible or interoperable between the two systems. The NAICS code is 333248 and the PSC is 3610.

Vendors must provide turnkey delivery, installation, and configuration, plus three days of on-site operator training for each system. Vendors must identify the organization that will perform installation and training and that organization's relationship to the OEM. Warranty requires at least one year for non-consumable parts and labor, plus one year of telephone or remote technical support.

Notice text

1.0 DESCRIPTION

The 355th Contracting Squadron is conducting market research to identify interested and capable businesses that can provide commercial automated digital flatbed cutting and routing equipment, Colex Sharpcut Pro or Equal, meeting the requirements described in Section 2.0 of this notice and in Attachment 1 - Vendor Capability Questionnaire. This Sources Sought Notice is for market research purposes only and is not a solicitation.

2.0 REQUIREMENT SUMMARY

  • Item: Two automated digital flatbed cutting and routing systems, Colex Sharpcut Pro or Equal, as further described in Attachment 1.
  • System 1: Minimum active cutting area of 120 inches by 60 inches, including automated board feeding with pallet-table or equivalent continuous-loading capability.
  • System 2: Minimum active cutting area of 80 inches by 124 inches.
  • Capabilities: Motorized conveyor beds; vacuum hold-down; cutting, routing, creasing, and marking for rigid and flexible packaging and preservation materials; and compatible or interoperable tooling and software/workflow between both systems.
  • Services: Turnkey delivery, installation, configuration, and three days of on-site operator training for each system. The vendor shall identify the organization proposed to perform installation and training and its relationship to the OEM.
  • Warranty and support: At least one year of warranty for non-consumable parts and labor, plus one year of telephone or remote technical support.
  • Delivery Terms: F.O.B. Destination to Davis-Monthan AFB, Arizona 85707.
  • NAICS Code: 333248 - Other Industrial Machinery Manufacturing.
  • PSC: 3610 - Printing, Duplicating, and Bookbinding Equipment.

3.0 RESPONSE INSTRUCTIONS

Interested and capable businesses must respond to this notice no later than Wednesday, November 25th 2026 at 8:00 AM MST (Tucson, AZ local time). Responses must be sent via email to the Contracting Officer; Patricia Murray, patricia.murray.6@us.af.mil Responses must include the following information:

1. Completed Attachment 1 - Vendor Capability Questionnaire.

2. Manufacturer product literature or a specification sheet for each proposed system. Product literature should provide sufficient detail for the Government to assess the proposed equipment against the requirements identified in Attachment 1.

The completed questionnaire must identify the organization proposed to perform installation and training and indicate whether that organization is the OEM, an OEM-authorized provider, or another provider. No separate authorization documentation is requested with this Sources Sought response.

4.0 DISCLAIMER

Information received in response to this notice may be used to inform the Government's acquisition strategy, including small business and competition determinations. The Government does not guarantee that a solicitation or award will result from this notice and will not reimburse respondents for costs associated with preparing or submitting a response to this notice.

Files

File Type Posted
Attachment_1_Vendor_Capability_Questionnaire.pdf PDF

Similar open opportunities

Opportunity Agency Set-aside Responses due
A27-017 Fiber Laser Metal Marking Tool Tinker AFB, Oklahoma 73145, United States · NAICS 333517 Air Force Sustainment Center No set-aside
Counter-Unmanned Aircraft System (C-UAS) Netting Installation for Aircraft Sunshade Structures Tyndall AFB, Florida 32403, United States · NAICS 238990 Air Combat Command Total Small Business
NMUSAF DAF Heritage Program Maintenance, Fabrication, and Support Equipment Wright Patterson AFB, Ohio, United States · NAICS 333998 AFLCMC Wright Patterson AFB No set-aside
L7WE01 Hybrid Laser Trimmer Warner Robins, Georgia 31098, United States · NAICS 333517 Air Force Sustainment Center Total Small Business

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors