Attachment_1_Vendor_Capability_Questionnaire.pdf
PDF 483 KB Posted
- Solicitation number
- FA487727QA028
About this file
This document is a Vendor Capability Questionnaire issued by the 355th Contracting Squadron at Davis-Monthan AFB, Arizona for flatbed cutting and routing equipment (FA4877-27-Q-A028). The questionnaire supports market research only and is not a solicitation.
The Air Force is seeking vendor information regarding two integrated flatbed cutting and routing systems. System 1 must provide a minimum active cutting area of 120 inches by 60 inches with automated board feeding and pallet-table or equivalent continuous-loading capability. System 2 must provide a minimum active cutting area of 80 inches by 124 inches. Both systems must include motorized conveyor beds and vacuum hold-down capability, and must perform digital cutting, routing, creasing, and marking for rigid and flexible packaging and preservation materials. The proposed configuration must provide compatible or interoperable tooling and software/workflow between the two systems, allowing file transfer without material rework or reprogramming. Additional requirements include optical registration, barcode-enabled job retrieval or equivalent automated job selection, and table mapping or equivalent bed calibration. Vendors must commit to turnkey delivery, installation, and configuration, with installation and three days of on-site operator training performed by the OEM or OEM-authorized servicer/trainer. A one-year warranty for non-consumable parts and labor plus one year of telephone or remote technical support is required. Vendors must also provide estimated delivery, installation, and training lead times. Required submissions include the completed questionnaire, manufacturer product literature or specification sheets for each proposed system, and identification of the OEM or OEM-authorized entity performing installation and training.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
VENDOR CAPABILITY QUESTIONNAIRE
Flatbed Cutting and Routing Equipment FA4877-27-Q-A028
355th Contracting Squadron (355 CONS) – Davis-Monthan AFB, AZ
Complete all applicable fields and attach manufacturer product literature or specification sheets for each proposed system. Use the 'Comments' column to identify configuration details, assumptions, optional components, alternate methods, exceptions, limitations, or other information needed to explain the response or supporting specification sheet. This questionnaire supports market research only and is not a solicitation.
Company Information
Company Name SAM UEI
CAGE Code Point of Contact
Email Address Telephone Number
Business Size Under Applicable NAICS Socioeconomic Category
Proposed Product Identification
Item System 1 System 2
Manufacturer and model number
Brand-name product or equal product ☐ Brand Name ☐ Equal ☐ Brand Name ☐ Equal
Capability Review
For each item, check the applicable assertion and provide a brief reference to the supporting specification sheet or product literature.
Identify exceptions or limitations in the final column.
Minimum Salient Characteristic Vendor's Assertion Spec Sheet Reference Comments
System 1 provides a minimum active cutting area of 120 inches by 60 inches and automated board feeding with pallet-table or equivalent continuous-loading capability.
☐ Meets
☐ Does Not
☐ Partially Meets
System 2 provides a minimum active cutting area of 80 inches by 124 inches.
☐ Meets
☐ Does Not
☐ Partially Meets
Both systems provide motorized conveyor beds and vacuum hold-down capability.
☐ Meets
☐ Does Not
☐ Partially Meets
Both systems perform digital cutting, routing, creasing, and marking for rigid and flexible packaging and preservation materials.
☐ Meets
☐ Does Not
☐ Partially Meets
The proposed configuration provides compatible or interoperable tooling and software/workflow between the two systems, allowing file transfer without material rework or reprogramming.
☐ Meets
☐ Does Not
☐ Partially Meets
The proposed configuration provides optical registration, barcode-enabled job retrieval or equivalent automated job selection, and table mapping or equivalent bed calibration.
☐ Meets
☐ Does Not
☐ Partially Meets
Vendor will provide turnkey delivery, installation, and configuration for both systems.
☐ Meets
☐ Does Not
☐ Partially Meets
Installation and three days of on-site operator training for each system will be performed by the OEM or an OEM-authorized servicer/trainer.
☐ Meets
☐ Does Not
☐ Partially Meets
Small Business Other than Small Business
VENDOR CAPABILITY QUESTIONNAIRE
Flatbed Cutting and Routing Equipment FA4877-27-Q-A028
355th Contracting Squadron (355 CONS) – Davis-Monthan AFB, AZ
Minimum Salient Characteristic Compliance Assertion Spec Sheet Reference Comments
Vendor will provide at least a one-year warranty for non-consumable parts and labor and one year of telephone or remote technical support.
☐ Meets
☐ Does Not
☐ Partially Meets
Provide estimated delivery, installation, and training lead time after receipt of order.
☐ Meets
☐ Does Not
☐ Partially Meets
Required Submission Items
• Completed Vendor Capability Questionnaire.
• Manufacturer product literature or specification sheet for each proposed system.
• Identification of the OEM or OEM-authorized entity proposed to perform installation and training.
Vendor Representative: ________________________________ Date: ____________________
| Company Information |
| Proposed Product Identification |
| Capability Review |
| Required Submission Items |
| Text1: |
| 0: |
| 0: |
| 1: |
| 1: |
| 0: |
| 1: |
| 2: |
| 0: |
| 1: |
| Group1: Off |
| Text2: |
| Text3: |
| Text8: |
| 1: |
| 2: |
| 3: |
| 4: |
| 5: |
| 0: |
| 6: |
| Text9: |
| 0: |
| 1: |
| 2: |
| 3: |
| 4: |
| 5: |
| 6: |
| 7: |
| Text10: |
| 0: |
| 0: |
| 1: |
| 1: |
| 0: |
| 1: |
File details come from the government source that posted it. Updated .