Atlanta Firing Range Services_
Closed Solicitation Posted
- Solicitation number
- 70T05025Q6100N006
- Agency
-
Transportation Security Administration
Department of Homeland Security
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 713990 All Other Amusement and Recreation Industries
- Place of performance
- Atlanta, Georgia, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Transportation Security Administration (TSA) is seeking quotations for firing range services in the Atlanta, Georgia area through solicitation number 70T05025Q6100N006. The agency requires use and rental of an existing indoor firing range that can accommodate twelve simultaneous firing points for eight days per month, with specific technical requirements including target placement between 1.5 and 75 feet from the firing line, secure storage facilities, restrooms, and a classroom for 24 students. The range must be located within 15 miles of Atlanta International Airport and provide exclusive access to TSA personnel during four-hour morning blocks, with the facility closed or obscured from public view during TSA operations. Quotations will be evaluated using the lowest price technically acceptable (LPTA) selection process, with awards potentially made on initial quotations. The deadline for submitting quotations is September 28, 2025, and quoters must be registered in the System for Award Management (SAM) at the time of submission.
This procurement is designated as a total small business set-aside under NAICS code 713990 (All Other Amusement and Recreation Industries) with a size standard of $9.0 million. The contract structure includes a base period from September 1, 2025 to August 31, 2026, followed by four option years extending through August 31, 2030, with each period covering 96 units of service. The firm-fixed-price contract will accommodate an estimated 24 shooters per day firing approximately 96,000 rounds monthly, with TSA providing ammunition, targets, and firearms instructors while the contractor handles lead recovery. Performance will take place at the contractor's facility in the Atlanta area, with contract administration handled by the TSA CG Finance Center in Chesapeake, Virginia. The solicitation does not identify any current incumbents or potential award values, though the contract includes provisions for surge capacity and potential extensions up to six months.
Notice text
3 versions
Update #3 · Latest ·
In accordance with Federal Acquisition Regulation (FAR) 4.1102 quoters are required to be registered in the System for Award Management (SAM) at the time an offer or quotation is submitted.
(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.
(ii) The solicitation number is 70T05025Q6100N006. The solicitation is issued as a Request for Quotation (RFQ).
(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-05.
(iv) This acquisition is issued on an unrestricted basis. The associated NAICS code is 713990 with a small business size standard of $9.0 M.
(v) List of Contract Line Item Numbers (CLINs), items, quantities, and units of measure:
See Attached SF-1449
(vi) Description of requirements for the items to be acquired: Use/rental of an existing/established firing range. See attached Statement of Work for specific requirements for an acceptable firing range.
(vii) Delivery, acceptance, and FOB point are at the contractor's facility.
(viii) The provision at 52.212-1, Instructions to Offerors -- Commercial applies to this acquisition. There are no addenda to the provision.
(ix) The provision at 52.212-2, Evaluation -- Commercial Items does not apply to the solicitation.
The evaluation procedures to be used are as follows:
Award will be made using the lowest price technically acceptable (LPTA) selection process. Award may be made on initial quotations. Therefore, each initial quote should contain the quoter's best terms from a technical and price standpoint. However, the Government reserves the right to contact quoters if it is later determined by the contracting officer to be necessary or in the government's best interests. The LPTA process will proceed as follows:
1) Quotes may be removed from consideration for, but not limited to, the following reasons:
• Quotes that are not received timely
• Quotes that fail to follow the instructions in FAR Provision 52.212-1
• Quotes that fail to submit ALL required documentation/provisions
• Quotes that do not provide completed pricing table
• Quotes that have language inconsistent with the terms and conditions set forth in the
solicitation
2) Quotes will be ordered by price from lowest to highest.
3) The Government will then review Factor 1 of the lowest priced quote. If the review finds that Factor 1 of the lowest priced quote is acceptable, the Government will then evaluate Factor 2 of the lowest priced quote. If the review finds that Factor 2 of the lowest priced quote is acceptable, that quote represents the best value to the Government and the technical evaluation process stops at this point. Contingent upon a subsequent determination of price reasonableness (Factor 3) and of contractor responsibility by the Contracting Officer, an award will be made to that quoter without further consideration of any other quoters.
If the lowest quote is determined not to be acceptable for any reason, then the next lowest priced quote will receive an evaluation as described above. The process will continue in order by price until a quote from a responsible contractor is determined to be acceptable and priced fairly and reasonably.
4) USING THIS PROCEDURE, THE GOVERNMENT MAY NOT EVALUATE ALL QUOTES.
(e) Each Factor will be evaluated as follows:
Factor 1. Technical Acceptability
Technical Acceptability will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - The quoted range meets all technical criterion stated in the Statement of Work. Unacceptable - The quoted range does not meet all technical criterion stated in the Statement of Work.
Factor 2. Past Performance
Past performance will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - Based on the quoter's performance record, the Government has a reasonable expectation that the quoter will successfully perform the required effort, or the quoter's performance record is unknown. (See note below.)
Unacceptable - Based on the quoter's performance record, the Government has no reasonable expectation that the quoter will be able to successfully perform the required effort
Note: In the case of a quoter without a record of relevant past performance, or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the quoter may not be evaluated favorably or unfavorably on past performance. Therefore, the quoter shall be determined to have unknown past performance. In the context of acceptability/unacceptability, "unknown" shall be considered "acceptable."
Note: Quoters are not required or requested to submit past performance references. The Government will use public and Government-restricted sources (e.g. CPARS) to evaluate past performance.
Factor 3. Price
Price will not be rated. Price analysis will be conducted to determine reasonableness.
Submission Requirements
- Completed Pricing schedule ON sf 1449
- Acknowledgement of Statement of Work requirements
- Most recent Lead Testing results in accordance with OSHA
- Applicable fill in clauses and provisions
- Subcontractor Agreement if Applicable
- Quoters are required to include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items with its quote. Quoters shall complete only paragraph (b) of this provision if they have completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov. If the Quoter has not completed the annual representations and certifications electronically, it shall complete only paragraphs (c) through
(q) of this provision.
(x) This is not a rated Defense Priorities and Allocations System (DPAS) order.
(xi) All quotes must be submitted via email to the points of contact listed no later than September 28, 2025 at 2 P.M Eastern Time.
(xii) For more information contact Delisa.Hawkins@tsa.dhs.gov.
Update #2 ·
In accordance with Federal Acquisition Regulation (FAR) 4.1102 quoters are required to be registered in the System for Award Management (SAM) at the time an offer or quotation is submitted.
(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.
(ii) The solicitation number is 70T05025Q6100N006. The solicitation is issued as a Request for Quotation (RFQ).
(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-05.
(iv) This acquisition is issued on an unrestricted basis. The associated NAICS code is 713990 with a small business size standard of $9.0 M.
(v) List of Contract Line Item Numbers (CLINs), items, quantities, and units of measure:
See Attached SF-1449
(vi) Description of requirements for the items to be acquired: Use/rental of an existing/established firing range. See attached Statement of Work for specific requirements for an acceptable firing range.
(vii) Delivery, acceptance, and FOB point are at the contractor's facility.
(viii) The provision at 52.212-1, Instructions to Offerors -- Commercial applies to this acquisition. There are no addenda to the provision.
(ix) The provision at 52.212-2, Evaluation -- Commercial Items does not apply to the solicitation.
The evaluation procedures to be used are as follows:
Award will be made using the lowest price technically acceptable (LPTA) selection process. Award may be made on initial quotations. Therefore, each initial quote should contain the quoter's best terms from a technical and price standpoint. However, the Government reserves the right to contact quoters if it is later determined by the contracting officer to be necessary or in the government's best interests. The LPTA process will proceed as follows:
1) Quotes may be removed from consideration for, but not limited to, the following reasons:
• Quotes that are not received timely
• Quotes that fail to follow the instructions in FAR Provision 52.212-1
• Quotes that fail to submit ALL required documentation/provisions
• Quotes that do not provide completed pricing table
• Quotes that have language inconsistent with the terms and conditions set forth in the
solicitation
2) Quotes will be ordered by price from lowest to highest.
3) The Government will then review Factor 1 of the lowest priced quote. If the review finds that Factor 1 of the lowest priced quote is acceptable, the Government will then evaluate Factor 2 of the lowest priced quote. If the review finds that Factor 2 of the lowest priced quote is acceptable, that quote represents the best value to the Government and the technical evaluation process stops at this point. Contingent upon a subsequent determination of price reasonableness (Factor 3) and of contractor responsibility by the Contracting Officer, an award will be made to that quoter without further consideration of any other quoters.
If the lowest quote is determined not to be acceptable for any reason, then the next lowest priced quote will receive an evaluation as described above. The process will continue in order by price until a quote from a responsible contractor is determined to be acceptable and priced fairly and reasonably.
4) USING THIS PROCEDURE, THE GOVERNMENT MAY NOT EVALUATE ALL QUOTES.
(e) Each Factor will be evaluated as follows:
Factor 1. Technical Acceptability
Technical Acceptability will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - The quoted range meets all technical criterion stated in the Statement of Work. Unacceptable - The quoted range does not meet all technical criterion stated in the Statement of Work.
Factor 2. Past Performance
Past performance will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - Based on the quoter's performance record, the Government has a reasonable expectation that the quoter will successfully perform the required effort, or the quoter's performance record is unknown. (See note below.)
Unacceptable - Based on the quoter's performance record, the Government has no reasonable expectation that the quoter will be able to successfully perform the required effort
Note: In the case of a quoter without a record of relevant past performance, or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the quoter may not be evaluated favorably or unfavorably on past performance. Therefore, the quoter shall be determined to have unknown past performance. In the context of acceptability/unacceptability, "unknown" shall be considered "acceptable."
Note: Quoters are not required or requested to submit past performance references. The Government will use public and Government-restricted sources (e.g. CPARS) to evaluate past performance.
Factor 3. Price
Price will not be rated. Price analysis will be conducted to determine reasonableness.
Submission Requirements
- Completed Pricing schedule ON sf 1449
- Acknowledgement of Statement of Work requirements
- Most recent Lead Testing results in accordance with OSHA
- Applicable fill in clauses and provisions
- Subcontractor Agreement if Applicable
- Quoters are required to include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items with its quote. Quoters shall complete only paragraph (b) of this provision if they have completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov. If the Quoter has not completed the annual representations and certifications electronically, it shall complete only paragraphs (c) through
(q) of this provision.
(x) This is not a rated Defense Priorities and Allocations System (DPAS) order.
(xi) All quotes must be submitted via email to the points of contact listed no later than September 22, 2025 at 9 P.M Eastern Time.
(xii) For more information contact Delisa.Hawkins@tsa.dhs.gov.
Update #1 ·
In accordance with Federal Acquisition Regulation (FAR) 4.1102 quoters are required to be registered in the System for Award Management (SAM) at the time an offer or quotation is submitted.
(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.
(ii) The solicitation number is 70T05025Q6100N006. The solicitation is issued as a Request for Quotation (RFQ).
(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-05.
(iv) This acquisition is issued on an unrestricted basis. The associated NAICS code is 713990 with a small business size standard of $9.0 M.
(v) List of Contract Line Item Numbers (CLINs), items, quantities, and units of measure:
See Attached SF-1449
(vi) Description of requirements for the items to be acquired: Use/rental of an existing/established firing range. See attached Statement of Work for specific requirements for an acceptable firing range.
(vii) Delivery, acceptance, and FOB point are at the contractor's facility.
(viii) The provision at 52.212-1, Instructions to Offerors -- Commercial applies to this acquisition. There are no addenda to the provision.
(ix) The provision at 52.212-2, Evaluation -- Commercial Items does not apply to the solicitation.
The evaluation procedures to be used are as follows:
Award will be made using the lowest price technically acceptable (LPTA) selection process. Award may be made on initial quotations. Therefore, each initial quote should contain the quoter's best terms from a technical and price standpoint. However, the Government reserves the right to contact quoters if it is later determined by the contracting officer to be necessary or in the government's best interests. The LPTA process will proceed as follows:
1) Quotes may be removed from consideration for, but not limited to, the following reasons:
• Quotes that are not received timely
• Quotes that fail to follow the instructions in FAR Provision 52.212-1
• Quotes that fail to submit ALL required documentation/provisions
• Quotes that do not provide completed pricing table
• Quotes that have language inconsistent with the terms and conditions set forth in the
solicitation
2) Quotes will be ordered by price from lowest to highest.
3) The Government will then review Factor 1 of the lowest priced quote. If the review finds that Factor 1 of the lowest priced quote is acceptable, the Government will then evaluate Factor 2 of the lowest priced quote. If the review finds that Factor 2 of the lowest priced quote is acceptable, that quote represents the best value to the Government and the technical evaluation process stops at this point. Contingent upon a subsequent determination of price reasonableness (Factor 3) and of contractor responsibility by the Contracting Officer, an award will be made to that quoter without further consideration of any other quoters.
If the lowest quote is determined not to be acceptable for any reason, then the next lowest priced quote will receive an evaluation as described above. The process will continue in order by price until a quote from a responsible contractor is determined to be acceptable and priced fairly and reasonably.
4) USING THIS PROCEDURE, THE GOVERNMENT MAY NOT EVALUATE ALL QUOTES.
(e) Each Factor will be evaluated as follows:
Factor 1. Technical Acceptability
Technical Acceptability will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - The quoted range meets all technical criterion stated in the Statement of Work. Unacceptable - The quoted range does not meet all technical criterion stated in the Statement of Work.
Factor 2. Past Performance
Past performance will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - Based on the quoter's performance record, the Government has a reasonable expectation that the quoter will successfully perform the required effort, or the quoter's performance record is unknown. (See note below.)
Unacceptable - Based on the quoter's performance record, the Government has no reasonable expectation that the quoter will be able to successfully perform the required effort
Note: In the case of a quoter without a record of relevant past performance, or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the quoter may not be evaluated favorably or unfavorably on past performance. Therefore, the quoter shall be determined to have unknown past performance. In the context of acceptability/unacceptability, "unknown" shall be considered "acceptable."
Note: Quoters are not required or requested to submit past performance references. The Government will use public and Government-restricted sources (e.g. CPARS) to evaluate past performance.
Factor 3. Price
Price will not be rated. Price analysis will be conducted to determine reasonableness.
Submission Requirements
- Completed Pricing schedule
- Acknowledgement of Statement of Work requirements
- Most recent Lead Testing results in accordance with OSHA
- Applicable fill in clauses and provisions
- Subcontractor Agreement if Applicable
- Quoters are required to include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items with its quote. Quoters shall complete only paragraph (b) of this provision if they have completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov. If the Quoter has not completed the annual representations and certifications electronically, it shall complete only paragraphs (c) through
(q) of this provision.
(x) This is not a rated Defense Priorities and Allocations System (DPAS) order.
(xi) All quotes must be submitted via email to the points of contact listed no later than August 25, 2025 at 2:00 pm (noon) Eastern Time.
(xii) For more information contact Delisa.Hawkins@tsa.dhs.gov.
Files
| File | Type | Posted |
|---|---|---|
| 70T05025Q6100N006_1_US.pdf | ||
| SOW_FFDO Atlanta Range_Final.pdf | ||
| 70T05025Q6100N006.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| FY27 42SFS CATM Range Cleaning | Air Education and Training Command | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity