Asme section IX orbital welding training
Closed Special Notice Posted
- Solicitation number
- 80NSSC26938626Q
- Agency
-
Shared Services Center
National Aeronautics and Space Administration
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 611519 Other Technical and Trade Schools
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
NASA's Shared Services Center announced a sole-source procurement for ASME Section IX orbital welding training to be delivered at NASA Marshall Space Flight Center, with a capability statement deadline of July 31, 2026 at 8:30 p.m. Central Standard Time. The agency intends to award to PECK ENTERPRISES LLC (DBA: SWAGELOK ALABAMA | CENTRAL & SOUTH FLORIDA | WEST TENNESSEE), which it has determined is the sole provider of this specialized training. The requirement covers a five-day instructor-led course for up to ten MSFC personnel involved in fabrication, inspection, testing, and quality assurance of mission-critical welded systems. The contractor must provide a qualified instructor, all course materials, welding equipment, tooling, fixtures, consumables, hands-on demonstrations, and competency assessments aligned with ASME Section IX code requirements; the Government will supply facility space, utilities, UHP argon gas, and scheduling coordination. Interested organizations may submit written capability statements to demonstrate whether the Government should conduct this procurement on a competitive basis; all oral communications are rejected. The procurement is classified under NAICS 611519 (Other Technical and Trade Schools) and will use FAR Part 12 commercial item procedures. Contact Cody Guidry, Procurement Specialist II, at Cody.d.guidry@nasa.gov for submission instructions or ombudsman information.
Notice text
VENDORS MUST REFERENCE THE NOTICE ID IF SUBMITTING A CAPABILITY STATEMENT.
Synopsis:
NASA/NSSC has a requirement for ASME SECTION IX ORBITAL WELDING TRAINING.
NASA/NSSC intends to issue a sole source contract to PECK ENTERPRISES LLC (DBA: SWAGELOK ALABAMA | CENTRAL & SOUTH FLORIDA | WEST TENNESSEE): 7290 CAHABA VALLEY RD; BIRMINGHAM, AL 35242 under the authority of FAR 12.102(a). It has been determined that PECK ENTERPRISES LLC is the sole provider of ASME SECTION IX ORBITAL WELDING TRAINING.
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space Flight Center (MSFC).
The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial
The NAICS Code for this procurement is 611519.
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact no later than 8:30 p.m. Central Standard Time on 7/31/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.
Oral communications are not acceptable in response to this notice.
NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf .
Primary Point of Contact:
Cody Guidry
Procurement Specialist II
Cody.d.guidry@nasa.gov
Files
| File | Type | Posted |
|---|---|---|
| SATPC0041960 TAB 07 SOW PRINTED.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| The Government Affairs Institute - Congressional Courses | Shared Services Center | 8(a) Sole Source | |
| virtual instructor-led delivery | Shared Services Center | No set-aside | |
| Flowserve MKII control valve to replace obsolete Fischer control valve on Complex-41 GN2 | Shared Services Center | 8(a) Sole Source | |
| ATI alloy sheet | Shared Services Center | No set-aside | |
| Repair and replacement of existing MTS lab Equipment | Shared Services Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity