BAA20: downdraft table and sanding room hexavalent chromium cleaning

STATEMENT OF WORK

AIR STATION SAN FRANCISCO DOWNDRAFT TABLE AND SANDING ROOM HEXAVALENT CHROMIUM CLEANING

1. SCOPE
    
   1. Scope of work.  The purpose of this statement of work (SOW) is to describe the specifications and scope of the hexavalent chromium cleaning contract for Air Station San Francisco’s downdraft table and sanding room.

1. 1. Point of Contact and Place of Cleaning. The principal point of contact will be the Aviation Engineering Officer or designated representative.  The address for the downdraft table and sanding room in need of cleaning is:
       
      Commanding Officer
      USCG Air Station San Francisco
      1020 North Access Road
      San Francisco, CA 94128
       
2. USCG REPRESENTATIVE
    
   1. Points of Contact.  Notwithstanding the Contractor’s responsibility for total management during the performance of the contract, the administration of the contract will require maximum coordination between the Government and the Contractor.  The individuals listed below will be the Government point of contract during the period.
       
                              Aviation Engineering Admin Officer:            (650) 808-2877
      Aviation Engineering Watch Captain :           (650) 808-2956
      OOD:                                                              (650) 808-2902
       
   2. Administrative Matters.  Contractual administrative matters will be addressed to the Contracting Officer listed below.  No other changes in, or deviation from, the scope of work shall be effected without written modification to the contract executed by the Contracting officer.
       
      Contracting Officer:
       
       
3. REQUIREMENTS   
    
   1. Provide industrial cleaning and decontamination of shop areas of surficial dust:
      1. The locations covered include the following:
         1. Location (1) Dirty Room
         2. Location (2) HAZMAT Storage Room
      2. Written decontamination procedures and a safety plan shall be submitted three days prior to the commencement of the cleaning activity to the Corrosion Prevention Coordinator. Written procedures must include a method of isolation of a containment area using negative air HEPA, methods of non-dust producing cleaning method, disposal method, specialty cleaning solvent, and work break-down plan.
      3. All surfaces horizontal and vertical shall be wet wiped or HEPA vacuumed and the surface must be free of visible residue. The dust must be treated as hazardous as it may contain hazardous substances such as Chromium (IV).
          
   2. Photos of the downdraft table and sanding room in need of cleaning:

Please contact SKC Christopher A. Bahn for procurement questions and to submit quotes to Christopher.A.Bahn@uscg.mil

916 643 7674

Contact LT. Schult @ John.W.Schultz@uscg.mil for technical questions  (916) 643-7600 or (916) 643-7697

STATEMENT OF WORK

AIR STATION SAN FRANCISCO DOWNDRAFT TABLE AND SANDING ROOM HEXAVALENT CHROMIUM CLEANING

1. SCOPE
    
   1. Scope of work.  The purpose of this statement of work (SOW) is to describe the specifications and scope of the hexavalent chromium cleaning contract for Air Station San Francisco’s downdraft table and sanding room.

1. 1. Point of Contact and Place of Cleaning. The principal point of contact will be the Aviation Engineering Officer or designated representative.  The address for the downdraft table and sanding room in need of cleaning is:
       
      Commanding Officer
      USCG Air Station San Francisco
      1020 North Access Road
      San Francisco, CA 94128
       
2. USCG REPRESENTATIVE
    
   1. Points of Contact.  Notwithstanding the Contractor’s responsibility for total management during the performance of the contract, the administration of the contract will require maximum coordination between the Government and the Contractor.  The individuals listed below will be the Government point of contract during the period.
       
                              Aviation Engineering Admin Officer:            (650) 808-2877
      Aviation Engineering Watch Captain :           (650) 808-2956
      OOD:                                                              (650) 808-2902
       
   2. Administrative Matters.  Contractual administrative matters will be addressed to the Contracting Officer listed below.  No other changes in, or deviation from, the scope of work shall be effected without written modification to the contract executed by the Contracting officer.
       
      Contracting Officer:
       
       
3. REQUIREMENTS   
    
   1. Provide industrial cleaning and decontamination of shop areas of surficial dust:
      1. The locations covered include the following:
         1. Location (1) Dirty Room
         2. Location (2) HAZMAT Storage Room
      2. Written decontamination procedures and a safety plan shall be submitted three days prior to the commencement of the cleaning activity to the Corrosion Prevention Coordinator. Written procedures must include a method of isolation of a containment area using negative air HEPA, methods of non-dust producing cleaning method, disposal method, specialty cleaning solvent, and work break-down plan.
      3. All surfaces horizontal and vertical shall be wet wiped or HEPA vacuumed and the surface must be free of visible residue. The dust must be treated as hazardous as it may contain hazardous substances such as Chromium (IV).
          
   2. Photos of the downdraft table and sanding room in need of cleaning:

Please contact SKC Christopher A. Bahn for procurement questions and to submit quotes to Christopher.A.Bahn@uscg.mil

916 643 7674

Contact casey stine @ blaise.c.curtis@uscg.mil for technical questions  (916) 643-7600 or (916) 643-7697