Aluminum Material for Bulkhead/Sluicegate Fabrication
Closed Solicitation Posted
- Solicitation number
- W912ES25Q0060
- Agency
-
ENDIST St Paul
US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 331313 Alumina Refining and Primary Aluminum Production
- Place of performance
- US Army Corps of Engineers Mrpo-Service Base25549, 182nd St Pleasant Valley, IA, 52767 and US Army Corps of Engineers Mrpo Service Base431 Northshore Drive Fountain City, WI 54629 52767
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Army Corps of Engineers, St. Paul District, is procuring various aluminum materials for fabricating a spillway sluicegate at Lock and Dam 7. The contractor must provide aluminum conforming to ASTM B209/B209M and ASTM B308/B308M standards for Alloy 6061, Temper T6, including plates, beams, tubes, bars, and channels across 12 line items with quantities ranging from 2 to 6 units per item. All materials must comply with the Buy American Act, be clean and defect-free with weld-acceptable surface roughness, and include proper marking with material specifications, heat numbers, and manufacturer identification. The contractor must submit verifiable mill certification electronically prior to shipment and bundle materials appropriately for forklift and crane handling. The original quote deadline was June 26, 2025, but has been extended multiple times, with the current response deadline set for August 22, 2025, at 3:00 PM, and delivery required no later than July 31, 2025.
This solicitation was initially designated as a 100% Small Business set-aside under NAICS code 331313 with a size standard of 1,300 employees, but was subsequently amended to Full and Open competition. The procurement requires delivery to two U.S. Army Corps of Engineers service bases located in Pleasant Valley, Iowa, and Fountain City, Wisconsin, during business hours from 7:00 AM to 3:00 PM, Monday through Thursday, excluding federal holidays. Material specifications include aluminum pieces with thicknesses ranging from 0.187 inches to 1 inch and dimensions up to 50 inches in width and 220 inches in length. Recent amendments have provided flexibility by allowing alternative material lengths for certain line items, such as accepting eight 10-foot pieces instead of two 40-foot pieces for CLIN-5, and permitting partial quotes when some materials are unavailable. The government has also clarified technical specifications, including confirmation that the Z-channel for CLIN-11 will be an extrusion and provided technical drawings for Z-bar specifications.
Notice text
SCOPE OF WORK Aluminum Material for Bulkhead/Sluicegate Fabrication at Lock and Dam 7U.S. Army Corps of Engineers, St. Paul District 1.General Description. The Contractor shall provide various shapes/quantities of aluminum material for the fabrication of a spillway sluicegate. This includes delivery to US Army Corps of Engineers Service Base in Fountain City, WI and Pleasant Valley, IA. 2. Aluminum Specifications. A. Must conform to Buy American Act. B. Must conform to ASTM B209/B209M and ASTM B308/B308M Alloy 6061, Temper T6C. Final product shall be clean and free of any oil or grease, dross, slag or burrs. D. All cut edges (regardless of method) shall have a surface roughness acceptable for welding.E. Final product shall be legibly marked with the applicable designation, grade, heat number, size and thickness, name brand, or trademark of the manufacturer for identification and shipment.F. Bundle and band the material required for shipping, with cribbing at minimum six inches above the base of the shipping platform to allow offloading with a forklift and/or crane. Covering of the material during shipment is not required.3. Sizes, Shapes: See SolicitationShipping Locations: See Solicitation. 4. Submittals The Contractor shall submit a verifiable mill certification electronically in pdf format via email to both the Government Contracting Officer?s representative and the Government technical point of contact prior to shipment of the material. The Government technical point of contact is: Available at the award.5. Delivery Location, Schedule, and POCs: Delivery shall be no later than July 31st, 2025. The soonest possible delivery is requested if possible. All material shall be delivered to the following addresses during business hours of 07:00 to 15:00, Monday through Thursday, excluding federal holidays. Please give the POC listed below 24 hours advance notice. The delivery location for each material is listed in section 3 of this statement of work. Delivery Location Address and POCs for each are as follows:US Army Corps of Engineers MRPO-Service Base25549 182nd St.Pleasant Valley, IA, 52767andUS Army Corps of EngineersMRPO Service Base431 Northshore DriveFountain City, WI 54629
Files
| File | Type | Posted |
|---|---|---|
| w912es25q0060P0003.pdf | ||
| W912ES25Q0060U0002-released.pdf | ||
| W912ES25Q0060U00001.pdf | ||
| W912ES25Q0060.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Aluminum thick flat bar, 24 FT lengths | — | Total Small Business | |
| Aluminum, 5" x 1/2" thick, flat bar | — | Total Small Business | |
| Steel and other Materials for the Marietta Repair Station: Stamford Barrier Gate Material PH 2 | ENDIST Huntington | No set-aside | |
| Steel and Other Metal Materials for the Marietta Repair Station: Stamford De-Watering Box Material PH 1 | ENDIST Huntington | No set-aside | |
| Debris Boom Supply and Install at Harry S. Truman Lake Project | ENDIST Kansas City | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity