Air Compressor Annual Service Maintenance and On-call Repair

SOURCES SOUGHT ONLY): The United States Army Special Operations Command (USASOC) - Contracting, located Fort Bragg North Carolina, is conducting market research to determine the existence of interested sources capable of providing all personnel, material, equipment, tools, labor, supervision and other items to conduct necessary preventative maintenance and repair for Annual Service Maintenance and On-call Repair for the U.S Army John F. Kennedy Special Warfare Center and School (USAJFKSWCS), Dive School located in Key West, Florida.

THIS IS NOT A NOTICE OF SOLICITATION ISSUANCE, BUT RATHER A SOURCES
SOUGHT (Reference number H92239-19-Q-0001) that will allow the Government to identify interested sources capable of meeting the requirement. The information sought herein is for planning purposes only and shall not be construed as a request for quote (RFQ), Request for proposal (RFP), Invitation for Bid (IFB), or as an obligation or commitment on the part of the Government to acquire any product or service. There shall be no basis for claims against the Government as a result of information submitted in response to the Sources Sought. The Government does not intend to award a contract on the basis of this Sources Sought, or otherwise pay for any information submitted by respondents to this request. This notice is for market research purposes only and is not indicative of a full requirement.

REQUIREMENT: The United States Army Special Operations Command (USASOC), is seeking to identify sources that are capable of providing the below annual maintenance service (ensure that all other aspects are properly operating, safety shutdowns, inter-stage pressures, carbon monoxide sensor, etc) and on-call repair for (4) four Bauer K60 IK23 Compressor units and (2) two Seccant Filtration Systems.

DESCRIPTION PART NUMBER QTY
Service of Bauer Air Compressor Units K60 IK23 4
Check all general operations
Check general stat-stop functions
Check all safety valves for leaks and seals
Pressure test & check final shut down PSI
Check Inter-stage & oil pressures
Check high temperature shut down
Check low oil shut down
Change oil & oil filter if so equipped
Check oil drive belt if so equipoised
Change air intake
Change breathing air filters
Change separator elements; inter-stage & final
Check intercoolers for leaks & if brackets secure
Check ACD-auto drain & dump times
Check & tighten electrical connections
Check & record full load amps
Check main drive belts
Check & calibrate CO monitor
Check secure functions
Check PMV & check valves
Test air test sample
Pressure test & check final shut down PSI
Parts required for service of Air Compressor
Bauer oil-0024/Gal/81260 Gallon synthetic oil chem. *Brand Name Only OIL-0024 12
Bauer N18906 Air Intake RO12 *Brand Name Only N18906 4
Oil Filter Bauer NI5839 special Hi-Flow for K220/230 R0312 *Brand Name Only N15839 4

Service of two (2) Seccant filtration Systems 2
Change breathing air filters
Change upper and lower filter tower seals
Change separator elements
Change separator seals
Change particle filter housing seals
Parts required for service of Seccant Filtration Systems
Bauer "O" ring for filter top N04735 special Viton 90 Brown ROJ12 *Brand Name Only N04735 4
Bauer back up ring V90 for filter top N04736 ROJ 12 *Brand Name Only N04736 4
Securus special for Seccant IV *Brand Name Only 060029 2
"O" Ring R12 *Brand Name Only N00062 4
"O" Ring 352 B-90 solid P-12 Towers R812 *Brand Name Only N17455 4
Back up B-90 solid *Brand Name Only N17456 4
Separator element for a Seccant IV filtration system R8l2 *Brand Name Only N27838 2
Particle filter for a Seccant IV R8l2 *Brand Name Only N15220 2
Dryer filter for Seccant IV just MS R012 *Brand Name Only 067868 4
Final filtration filter for Seccant IV MS-HP-AC-M S R512 *Brand Name Only 090308 2
PO/Final separator tower 0-ring *Brand Name Only N04586 2
O ring RO12 *Brand Name Only N90123 8
Retainer Ring R012 *Brand Name Only N90125 8

**Any interested vendors will need to be an authorized Bauer Compressor, Inc. sales and service distributor.

INTERESTED SOURCES CAPABLE OF FULFILLING THIS REQUIREMENT shall submit documentation addressing all required elements listed herein; providing only a reference to a website is unacceptable for purposes of this announcement and will not be considered or reviewed. All proprietary or corporate data received shall be clearly identified and shall be protected from release to sources outside the Government. Please do not submit classified material. Contractors interested in providing this service should be registered in the System for Award Management (www.sam.gov).

Contractors responding to this Sources Sought are asked to provide the following information:
1. No more than a 2 page capability narrative explaining how the company can provide the requirements by the required delivery date and/or if they are authorized to distribute parts and perform services on Bauer equipment by the manufacturer;
2. Company's full name, point of contact, and address;
3. DUNS and CAGE number;
4. Applicable North American Industry Classification Standards (NAICS) and business size (whether they are a large, small, small-disadvantaged, 8(a), HUBZone, woman-owned, Service-Disabled Veteran Owned Small Business, historically black college or university and/or minority service institute) (Respondents should advise the Government of pending changes in the business size status).

RESPONSES ARE DUE: Please submit responses directly to Ms. Rochene Carroll at rochene.carroll@socom.mil and cc. jennifer.payne@socom.mil . All responses shall be submitted by 11:00 AM EST on 31 Oct 2018 and shall include reference number H92239-19-Q-0001 in the subject line and submission documents. Respondents are cautioned that due to file size limitations and e-mail security protocols, there is a risk that not all correspondence will be received by this office. It is the interested parties' responsibility to ensure receipt of all e-mail and faxed correspondence. If receipt has not been acknowledged within 24 hours, please contact the Contracting Office at 910-432-6133.

Respondents will NOT be individually notified of the results.

.