Aheadd CP-1 SLM Solutions NXG Test Plates Build
Closed Solicitation Posted
- Solicitation number
- 80NSSC26936597Q
- Agency
-
Shared Services Center
National Aeronautics and Space Administration
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 334519 Other Measuring and Controlling Device Manufacturing
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
NASA's Shared Services Center seeks Aheadd CP-1 SLM Solutions NXG test plates build, with a capability statement deadline of July 16, 2026. The procurement is a sole source intended for NIKON AM SYNERGY INC under FAR 12.102(a), though NASA will evaluate unsolicited capabilities to determine whether to conduct this on a competitive basis.
Performance will be located at NASA Marshall Space Flight Center in Huntsville, Alabama. The contractor must possess prior experience manufacturing Aheadd CP-1 using laser powder bed fusion additive manufacturing and must deliver thirty plates of Aheadd CP-1 built on a Nikon SLM Solutions NXG XII 600 with dimensions of 12 inches by 5 inches by 0.25 inches (length by width by height) after build plate removal, along with printed specimens according to an agreed-upon specimen matrix, de-powdered specimens, and comprehensive build documentation including powder certificates of conformance and laser assignment parameters. All deliverables must be shipped to Marshall Space Flight Center, Central Receiving, Building 4631, Huntsville, Alabama 35812. The performance period is six weeks from contract award. The NAICS code is 334519 (Other Measuring and Controlling Device Manufacturing), and the PSC code is 6695 (Combination and Miscellaneous Instruments). Commercial item procedures under FAR Part 12 apply. Interested organizations must submit capabilities in writing to Cody Guidry, Procurement Specialist II, at Cody.d.guidry@nasa.gov. Oral communications are not acceptable. NASA FAR Supplement Clause 1852.215-84 (Ombudsman) applies.
Notice text
VENDORS MUST REFERENCE THE TRACKING NUMBER IN THE SUBJECT LINE OF THE EMAIL IF SUBMITTING A CAPABILITY STATEMENT.
Synopsis:
NASA/NSSC has a requirement for Aheadd CP-1 SLM Solutions NXG Test Plates Build.
NASA/NSSC intends to issue a sole source contract to NIKON AM SYNERGY INC: 3550 E CARSON ST | LONG BEACH, CA 90808 under the authority of FAR 12.102(a). It has been determined that NIKON AM SYNERGY INC is the sole provider of Aheadd CP-1 SLM Solutions NXG Test Plates Build.
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space Flight Center (MSFC).
The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial
The NAICS Code for this procurement is 334519.
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 3:00 p.m. Central Standard Time on 7/16/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.
Oral communications are not acceptable in response to this notice.
NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf .
Primary Point of Contact:
Cody Guidry
Procurement Specialist II
Cody.d.guidry@nasa.gov
Files
| File | Type | Posted |
|---|---|---|
| SATPC0041532 TAB 07 SOW PRINTED.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Repair and replacement of existing MTS lab Equipment | Shared Services Center | No set-aside | |
| RED Digital V-Raptor X customized cameras per NASA vibration specifications | Shared Services Center | No set-aside | |
| Zygo Purchase | Shared Services Center | No set-aside | |
| Transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials. | Shared Services Center | No set-aside | |
| ABAR Vacuum Furnace Calibration Services | Shared Services Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity