Advanced Munitions Technology Complex PH II FTFA 043000, Eglin Air Force Base, Florida

Date Solicitation  Documents Available (Approx.) 29 JULY 2020

THIS PROJECT IS ADVERTISED ON AN UNRESTRICTED BASIS

UTILIZING FAR PART 15 SOURCE SELECTION PROCEDURES

THE NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (NAICS) CODE FOR THIS PROJECT IS 236220.

ESTIMATED COST RANGE OF PROJECT Between $25M and $100M

This project includes construction of The Complex for Agile Processing of Energetics, Advanced Processing (CAPE) as part of the Advanced Munitions Technology Complex at the High Explosives Research and Development (HERD) sector at Eglin AFB. The CAPE Facilities are made up of six Bunkers, the sf of the facilities is two (2) bunkers at 484 sf each and four (4) bunkers at 495 sf each. The facility is 2,948 sf. The (CAPE) Facilities will also construct The CAPE Explosive Machining Facility containing the three explosive machining bunkers and the staging building for the equipment in the energetics processing and machining bunkers. All equipment in the bunkers is operated remotely from the control room in the staging building. The facility is 4,035 sf.

The Advanced Dynamics Chamber (ADC-50) Facility is part of the Advanced Munitions Technology Complex at the High Explosives Research and Development (HERD) sector at Eglin AFB.  The ADC-50 is a hardened research laboratory that is subject to deliberate and repetitive explosion testing for net explosive weights (N.E.W) up to 50lb. The building is one story with a high bay over the blast chamber and observation room.   The facility is 10,247 sf.

The Advanced Energetics Research Laboratory (AERL) Facility is part of the Advanced Munitions Technology Complex at the High Explosives Research and Development (HERD) sector at Eglin AFB.  The building is one story with a high bay over the laboratories and building support spaces.   The facility is 11,137 sf.

The Explosive Storage Facility shall accommodated hazard class 1.1D storage of 40,000 lbs. N.E.W. Design is similar to Igloo Munitions Storage module that is a  DOD Explosives Safety Board  approved facility.

The North American Industry Classification System (NAICS) code for this project is 236220.

Field Office:  Eglin Resident Office  POC: Stephen Schillinger, 850-974-7811 Eglin AFB, Florida 32542

Project Manager: William Caswell, 251-690-2701

Project Architect/Engineer: Kim Edwards, 251-694-4611

A/E:  Burns & McDonnell             

Specification Engineer:  Marie Klusman, 251-694-3644 

Note No. 1: All prospective contractors and their subcontractors and suppliers must be registered in beta.sam.gov before they will be allowed to download solicitation information.  Contractors must be registered in the System for Award Management (SAM) at https://www.sam.gov/portal/public/SAM/ prior to award of this contract.  Solicitation documents, plans and specifications will only be available via beta.sam.gov.  Registration for plans and specifications should be made via beta.sam.gov.  If you are not registered, the United States Government is not responsible for providing you with notifications of any changes to this solicitation.  The solicitation will be available only as a direct download.  This solicitation will not be issued on CD-ROM.  Neither telephonic, mailed, nor fax requests will be accepted.  Registration should be completed one week prior to the issue date.  It is therefore the Contractor’s responsibility to monitor the website daily for the solicitation to be posted, and for any posted changes or amendments to this solicitation.  The plans and specifications and all notifications of changes to this solicitation shall only be made through this posting and modifications hereto.  Plans and specifications will not be provided in a printed-paper format; however, the Government reserves the right to revert to paper medium when it is determined to be in the Government's best interest.  NOTE:  This solicitation is in .pdf format and requires Adobe Acrobat Reader. Adobe Acrobat Reader may be downloaded free of charge at http://www.adobe.com/products/reader.

Note No. 2:  All bid forms, bid bonds, and other normal documents required for the bid submittal, including amendments to the bid submittal, shall be electronic format with the proposal.

Note No. 3:  Critical path method (network analysis system) is required.

Note No. 4: For this job, a small business is defined as having average annual receipts of less than $39,500,000 for the past three years. 

Note No. 5:  This solicitation includes bid options which may not be awarded.

Note No. 6:  All advertisements of Mobile District projects will be through beta.sam.gov.  Detailed information on this and other Mobile District Projects (Ordering Solicitations, Points of Contact, Synopsis of Work, etc.) are available on the Internet at:  https://www.beta.sam.gov.

Address questions concerning downloading of plans/specifications to the Contract Specialist indicated above.

Note No. 7:   Site Visit information will be posted with the solicitation.

Note No. 8:  The request for information (RFI) process for bidder inquiries during the advertisement period will be through the ProjNet internet based system, and specifics will be contained in the RFP solicitation package available exclusively from beta.sam.gov.  Other forms of communicating RFIs to the Government will not be honored.  The Government will try to respond to all questions. However, responses may not be furnished to all questions and particularly those received late in the advertisement period (0-10 days prior to bid opening.)

-- END --