Adaptive Optics System for a High Energy Laser Weapon System
Closed Solicitation Posted
- Solicitation number
- A19-087
- Agency
-
Space and Missile Defense Command
Department of the Army, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
Notice text
DoD SBIR topic A19-087
Component: ARMY
Command: SMDC
Phase: SBIR Program Phase I Action
Technology Areas: Electronics
Keywords: Adaptive optics; atmospheric compensation; wavefront sensor; high energy lasers; beam control
Objective:
To design an adaptive optics system to compensate for branch points (phase tears), speckle, and scintillation that will fit into a relevant Army weapon system platform with component technology that can be developed today.
Description:
Adaptive Optics systems are used to compensate for index of refraction variations in the atmosphere. Such systems are well known for astronomical applications, but implementation and performance in a high energy laser (HEL) weapon system is still not well known. Adaptive optics in HEL systems typically consist of a beacon illuminator laser that creates a non-cooperative beacon spot on the target that is imaged back through the main HEL telescope onto a wavefront sensor. The measured atmospheric distortions are then relayed onto a correction device such as a deformable mirror and the HEL beam is corrected before exiting the main telescope of the HEL. One issue with this approach in deep turbulence is the ability to measure phase when a branch point, or two pi phase shift occurs across the wavefront and the phase cannot be measured with conventional methods. Several approaches have been theorized to measure the branch points, but are impractical to implement into a HEL weapon system because the hardware necessary to implement them does not exist or is too large and complicated to integrate into a tactical system. For example, self-referencing interferometers and digital holography wavefront sensing has been modeled and demonstrated in a lab environment, but would require a beacon illuminator of powers that do not exists today.
This solicitation in interested in adaptive optics systems that are capable of detecting and compensating for atmospheric conditions that include branch points while still operating in the constraints of a HEL weapon system. The volume for all hardware other than optics in the main HEL beam train to include electronic drivers and racks, illuminator lasers, chillers, etc. shall be no more than 3 cubic feet. Optical components and sensors added to the main HEL optical bench shall be minimal and not require more than approximately 2 square feet additional space. Power consumption of all components shall not be more than 1 kW, with the primary focus of power constraint on the illuminator laser. Assume a telescope aperture for a wavefront sensor of 30 cm. The system must be capable of compensating the following parameters: • Atmospheric Turbulence: Threshold – Cn2 of 10-13; Objective – Cn2 of 10-12 • Rytov number: Threshold – 0.25; Objective – 0.5 • Target distance: Threshold – 8 km; Objective – 18 km
Phase I:
The phase I effort shall include analysis and concept design of the proposed system. The concept design and analysis in phase I shall be detailed enough to justify a proof of concept within the constraints of the HEL weapon system.
Phase II:
During phase II, the phase I concept designs will be utilized to complete a full detailed AO system design and algorithm development. The phase II shall complete a fully detailed design of the hardware architecture and a detailed design of the control loop that measure and compensate for atmospheric turbulence, as in a reconstructor. The complete design shall include how the AO system will be integrated into a HEL weapon system. The emphasis of the Phase II effort shall be a complete system design with supporting modeling and simulation or laboratory experiments to justify that the proposed method will work.
Phase III:
The phase III effort shall be to design and develop the AO system in a relevant beam control system. The Space and Missile Defense Command has a number of experimental platforms such as the High Energy Laser Mobile Test Truck (HEL MTT) and the Mobile Beam Control System Integration Laboratory that could support testing of the AO system developed in this effort. The US Army Space and Missile Defense Technical Center as part of its Directed Energy research would execute military funding for this Phase III effort.
Files
| File | Type | Posted |
|---|---|---|
| A19-087.pdf |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity