Acrylic roofing system

A description of the requested services are listed within the attached Statement of Work (SOW). Please note that all interested contractors interested in submitting a quote for this requirement are to provide a cut sheet or specification sheet on all proposed materials to be utilized for this requirement.

No bid, performance, or payment bodning is required since this requirement is only for the purchase of roofing supplies and equipment and not for any demolition or installation work.

The roof is a simple gable roof with a 3:12 slope. From the center to the  eave is 11 feet 3 inches. The panels would need to be roof framing with support members to carry the panels. The system needs to be similar to a sunroom roof, however it would also have a gutter and downspout on each side.

The frame, gutters, downspouts, ridge cap and panels shall be bronze color. There are panel on both sides of the center of the roof. The total length of the roof is 16 feet 2 inches. The roof is between a building and a drop off canopy. The building is clay brick and the other is stucco finish. There needs to be a flashing for both of the adjoining walls. The panel thickness need to be determined from the support system and loadings.

Interested contractors must provide a copy of cut sheets and specification sheets for the materials, and supplies being quoted. As well as the lead time on delivery of the materials, and supplies.