8 inch DIA SCH 140 Pipe
Closed Pre-Solicitation Posted
- Solicitation number
- N3904024SS0111
- Agency
-
Naval Sea Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 332996 Fabricated Pipe and Pipe Fitting Manufacturing
- PSC
- 4710 Pipe, Tube And Rigid Tubing
- Place of performance
- Kittery, Maine 03904, United States
Notice details come from SAM.gov. Updated .
About this opportunity
Summary:
The Department of the Navy's Naval Sea Systems Command is seeking sources capable of manufacturing 8-inch diameter, Schedule 140 corrosion resistant steel pipe with nuclear applications that require non-destructive testing. The pipe must meet specific MIL-STD-2132D requirements for ultrasonic and liquid penetrant testing procedures. Prospective entities are encouraged to provide the requested testing procedures for preliminary review, but responses do not constitute an official quote, offer, or agreement. The sources sought notice will remain active until August 24, 2024, and the government will not compensate entities for developing the procedures.
This procurement is set aside for small businesses. If minimal responses are received from small businesses, the requirement may be solicited using full and open competition. The government has not provided any information about potential incumbents, award values, or budget ranges for this requirement. Responses are due by December 12, 2024.
Notice text
2 versions
Update #2 · Latest ·
This sources sought is being issued on a market research basis in accordance with Federal Acquisition Regulation (FAR) Part 10.
Portsmouth Naval Shipyard seeks to identify entities capable of manufacturing 8 inch DIA SCH 140 Pipe with a nuclear application that also has Non-Destructive Testing requirements to the following MILSPECs:
- Ultrasonic Testing Procedure in accordance with MIL-STD-2132D (including acceptance criteria per MIL-DTL-23226)
- Liquid Penetrant Test Procedure in accordance with MIL-STD-2132D (including acceptance criteria per MIL-DTL-23226)
Prospective technical ordering data and data requirements for this requirement is attached to this notice.
Prospective entities are encouraged to identify themselves and provide the procedures listed above to the Government for preliminary review, however no responses to this notice will constitute as an official quote, offer, or agreement with the Government at this time in accordance with FAR 15.201(e). Additionally, the Government will not compensate entities for the development of procedures as a result of this notice.
Responses shall be limited to the appropriate length of any/each of the three (3) requested procedures, and an optional three (3) page cover letter.
Responses shall include the following information:
- Company Name and CAGE Code as reflected in its current SAM Registration, and Tax Identification Number (TIN)
- Point of Contact (POC) (name, telephone number, email address, street address)
- Business Size & Business Type
- Company’s Capabilities Statement, and related marketing materials
Responses to this notice may or may not be returned. Respondents may or may not be notified of the result of this notice. It is the potential vendor’s responsibility to monitor this site for the release of any follow-on information, up to and including a solicitation or contract award notice.
If minimal response resulting from this notice is received from Small Businesses, this requirement may be solicited utilizing Full and Open Competition.
This notice will remain active until August 24th, 2024 (REVISED to December 12th 2024). Contact Tom Fuller at thomas.g.fuller17.civ@us.navy.mil, and Chuck Chase at charles.e.chase23.civ@us.navy.mil for more information.
Update #1 ·
This sources sought is being issued on a market research basis in accordance with Federal Acquisition Regulation (FAR) Part 10.
Portsmouth Naval Shipyard seeks to identify entities capable of manufacturing 8 inch DIA SCH 140 Pipe with a nuclear application that also has Non-Destructive Testing requirements to the following MILSPECs:
- Ultrasonic Testing Procedure in accordance with MIL-STD-2132D (including acceptance criteria per MIL-DTL-23226)
- Liquid Penetrant Test Procedure in accordance with MIL-STD-2132D (including acceptance criteria per MIL-DTL-23226)
Prospective technical ordering data and data requirements for this requirement is attached to this notice.
Prospective entities are encouraged to identify themselves and provide the procedures listed above to the Government for preliminary review, however no responses to this notice will constitute as an official quote, offer, or agreement with the Government at this time in accordance with FAR 15.201(e). Additionally, the Government will not compensate entities for the development of procedures as a result of this notice.
Responses shall be limited to the appropriate length of any/each of the three (3) requested procedures, and an optional three (3) page cover letter.
Responses shall include the following information:
- Company Name and CAGE Code as reflected in its current SAM Registration, and Tax Identification Number (TIN)
- Point of Contact (POC) (name, telephone number, email address, street address)
- Business Size & Business Type
- Company’s Capabilities Statement, and related marketing materials
Responses to this notice may or may not be returned. Respondents may or may not be notified of the result of this notice. It is the potential vendor’s responsibility to monitor this site for the release of any follow-on information, up to and including a solicitation or contract award notice.
If minimal response resulting from this notice is received from Small Businesses, this requirement may be solicited utilizing Full and Open Competition.
This notice will remain active until August 24th, 2024. Contact Tom Fuller at thomas.g.fuller17.civ@us.navy.mil for more information.
Files
| File | Type | Posted |
|---|---|---|
| TOD for Sources Sought.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Pipe, 8IN | Naval Supply Systems Command | No set-aside | |
| Union, pipe | Naval Supply Systems Command | No set-aside | |
| Tube | Naval Supply Systems Command | No set-aside | |
| Elbow, pipe | Naval Supply Systems Command | No set-aside | |
| Stem, valve | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity