66A Rotary feedthrough for VOiD deposition system

Closed Special Notice Posted

Solicitation number
80NSSC26938965Q
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

Notice details come from SAM.gov. Updated .

About this opportunity

NASA's Shared Services Center issued a sole-source Special Notice for a 66A Rotary feedthrough for VOiD deposition system, with capabilities submissions due by 9:00 a.m. Central Time on August 3, 2026. The procurement is restricted to KURT J LESKER CO, 1925 Route 51, Clairton, Pennsylvania, whom the government has determined is the sole provider of this equipment under FAR 12.102(a). Performance will be located at NASA Glenn Research Center.

The requirement is for two complete motorized concentric shaft assemblies, each with dual independent shafts operating simultaneously through a single DN40CF flange. Both inner and outer shafts must be motorized with encoder-based position feedback; the outer shaft must transmit torques of at least 6.6 lb-ft and the inner shaft at least 0.3 lb-ft. Equipment must be rated for high vacuum systems at pressures of 10E-7 Torr or below, with an estimated 11-week delivery timeline after purchase order placement. The procurement will utilize FAR Part 12 commercial item procedures. NAICS code 333912 applies.

Interested organizations may submit written capabilities and qualifications by the August 3 deadline to evaluate whether full and open competition is warranted. Price offers will not be reviewed at this time. Monica Wilson (monica.d.wilson@nasa.gov) is the primary point of contact.

Notice text

*PLEASE NOTE* THIS IS NOT A REQUEST FOR QUOTES. ANY PRICE OFFERS RECIEVED WILL NOT BE REVIEWED / ACCEPTED AT THIS TIME.

A price quote alone generally does not provide sufficient information to evaluate a vendor's technical capability.

See the attached SOW. 

All correspondence must reference ID# to ensure visibility. 

Synopsis:

NASA/NSSC has a requirement for 66A Rotary feedthrough for VOiD deposition system. 

NASA/NSSC intends to issue a sole source contract to KURT J LESKER CO, 1925 Route 51 Clairton, Pennsylvania 15025-3681, under the authority of FAR 12.102(a). It has been determined that KURT J LESKER CO is the sole provider of 66A Rotary feedthrough for VOiD deposition system

NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Glenn Research Center (GRC).

The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial

The NAICS Code for this procurement is 333912.

Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 9:00 a.m. Central Standard Time on 8/3/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.

Oral communications are not acceptable in response to this notice.

NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf .

Primary Point of Contact:

Monica Wilson

Procurement Assistant

monica.d.wilson@nasa.gov

Secondary Point of Contact:

Karen Artis

Contract Specialist

karen.l.artis@nasa.gov

Files

File Type Posted
SATPC0041927 Tab 04 4 SPECS.pdf PDF

Similar open opportunities

Opportunity Agency Set-aside Responses due
6" Flex Flo Bodies United States · NAICS 332996 Shared Services Center 8(a) Sole Source
Repair and replacement of existing MTS lab Equipment Hampton, Virginia 23681, United States · NAICS 334519 Shared Services Center No set-aside
Ceramic seal test hardware United States · NAICS 332710 Shared Services Center Total Small Business
"Provide specialized piping expertise overseeing the Craft Labor/Corrosion Control subcontractor for field modifications at KSC including but not limited to fabrication and installation of piping spool pieces, piping & tubing supports, flared & welded tubi United States · NAICS 541715 Shared Services Center 8(a) Sole Source
L-PBF Development of ODS Alloys for Recording Methane/Oxygen Combustion Properties Huntsville, Alabama 35812, United States · NAICS 541715 Shared Services Center No set-aside

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity