47QSSC25Q0008 MasterCam 3D Dynamic Motion
Closed Solicitation Posted
- Solicitation number
- 47QSSC25Q0008
- Agency
-
Federal Acquisition Service
General Services Administration
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 513210 Software Publishers
- Place of performance
- Keyport, Washington 98345, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
This procurement is for a one-time purchase of MasterCam software licenses and associated maintenance, including products for mill 3D machining, lathe turning, and multi-axis motion. The solicitation is issued by the GSA Federal Acquisition Service on behalf of the Navy Command stationed in Keyport, WA. The key requirements are that the quoted part numbers must be brand name MasterCam, and the award will be based on the lowest price technically acceptable, with past performance evaluation as part of the responsibility determination. Quotes must be submitted by 5:00pm EST on November 15, 2024 and will be valid for 30 calendar days.
The procurement is set aside for total small business. No potential incumbents or current contractors are named. The total quantity is 6 line items, including 1 each of the Mill 3D, Lathe Full, Multi-Axis, and associated maintenance licenses. The place of performance is Keyport, WA 98345.
Notice text
*BRAND NAME ONLY**
FAR 6.302-1(c) is being invoked to limit sources to only MFR: MasterCam.
This one time buy is pursuant to the ward for Ansys Licenses and for other than small business, under NAICS Code 513210.
Technical specifications include that quoted part number is a brand name match to the requested part number and compliant to delivery schedule. Vendor must acknowledge, mark order as shipped, and provide tracking information through vendor portal or EDI. Quoted part number must be brand name MFR: MasterCam. See Brand Name Justification (Attachment 1), quote ALL or none.
This procurement is a one-time buy for the following Brand name P/N(s) :
Line 1: PN Mill 3d Mastercam: for multi-surface machining 3-axis - Quantity: 1
Line 2: PN Mastercam Lathe Full: 2-axis turning with support - Quantity: 1
Line 3: PN Mastercam multi-axis: Add support for 4 and 5 axis motion - Quantity: 1
Line 4: PN MasterCam Maint- Mill 3D: Support Mill-3d - Quantity: 1
Line 5: PN Mastercam Maint- Lathe: Support Lathe - Quantity: 1
Line 6: PN Mastercam Maint- Multiaxis: Support Multiaxis - Quantity: 1
Address: NUWC - Keyport, WA
Award is subject to the terms and conditions of the RFQ document, including but not limited to the following:
1. Delivery is required and identified per part number above.
2. Complete and accurate addresses will be provided on the purchase order subsequent to award. This is a FOB Destination.
3. Letter of Supply/Authorized Reseller letters and/or Teaming Agreements MUST be submitted WITH THE QUOTE.
4. This is a Brand Name requirement (Attachment 1).
5. Vendors must submit a quote utilizing the Excel Quote worksheet (see Attachment 2) and emailed to the POC provided below
6. The award will be conducted based on the lowest price technically acceptable (LPTA). Past performance evaluation will be performed as part of a responsibility determination.
7. Vendor must acknowledge, mark order as shipped, and provide tracking information through vendor portal or EDI.
Quotes must be valid for 30 calendar days.
To submit a quote, please email Jocelyn Vazquez-Wiggins at jocelyn.vazquez-wiggins@gsa.gov, referencing solicitation number 47QSSC25Q0008 MasterCam 3D Dynamic Motion in the subject line no later than 5:00pm EST on NOVEMBER 15, 2024. Vendors shall include the attached Vendor Quote Sheet, Letter of Supply, and Teaming agreements (if applicable) with their quotes. Should you have any questions please emailJocelyn Vazquez-Wiggins at jocelyn.vazquez-wiggins@gsa.gov.
Attachments:
1. Brand Name Justification
2. Excel Quote Worksheet Template
Files
| File | Type | Posted |
|---|---|---|
| Attachment 1 Brand Name Justification.pdf | ||
| Attachment 2 Quote Worksheet.xlsx | XLSX spreadsheet |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Pin | Naval Supply Systems Command | No set-aside | |
| 0831-01 - Green Hills Hardware (HW) & Software Maintenance (SWM) | Naval Sea Systems Command | No set-aside | |
| One (1) DN PUMA Vertical Turning Center (VTC) 1620M Machine | Aviation | No set-aside | |
| Test set subassembl | Naval Supply Systems Command | No set-aside | |
| Cap | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity