3D PotterBot 4000ml Extruder
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- W912HZ25Q0015
- Agency
-
Engineer Research and Development Center
US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333248 All Other Industrial Machinery Manufacturing
- Place of performance
- Vicksburg, Mississippi 39180, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Army Corps of Engineers Engineer Research and Development Center (ERDC) is seeking to procure a 3D PotterBot SCARA V4+ Auger System with a 4000ml extruder for use in a dredge sediment placement project. The solicitation (W912HZ25Q0015) is a combined synopsis/solicitation for a commercial item using simplified acquisition procedures. Key contract requirements include equipment specifications such as continuous pump flow of 38 L/min, 220V power requirement, multiple print nozzles, and compatibility with clay and cement matrices. The evaluation criteria will be based on two primary factors: lowest price and technical acceptability, with offerors required to submit sufficient documentation to demonstrate compliance. Critical dates include a deadline for technical inquiries on March 27, 2025, and a quote submission deadline of March 28, 2025, at 3:00 PM Central Time, with vendors expected to submit responses via email to Shinita Jordan and Sonia Boyd.
The contract is designated as a total small business set-aside under NAICS category 333248 (All Other Industrial Machinery Manufacturing), with a size standard of 750 employees. The procurement is for one 3D PotterBot SCARA V4 system, with delivery expected within 14 days after the award date, targeting a performance location in Vicksburg, Mississippi. Offerors must be registered in the System for Award Management (SAM) to be eligible for contract award. While specific award values are not detailed in the solicitation, the procurement is structured for a single unit of the specialized 3D printing equipment. The solicitation is part of the DOER 25-01 project focused on automated dredge sediment placement for phytoremediation and upland placement site restoration, indicating a specialized scientific and environmental engineering application for the requested equipment.
Notice text
2 versions
Update #2 · Latest ·
This is a combined synopsis/solicitation being issued to procure SUPPLY - 3D PotterBot SCARA V4+ Auger System : 4000ml Extruder. The supply must be available for delivery to Vicksburg, Mississippi.
The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price, and other factors considered. The following factors shall be used to evaluate offers:
1. Lowest Price and
2. Technically Acceptable
See attached solicitation for full requirements. It is imperative that the offeror submit sufficient documentation and information for the
Government to determine technical acceptability and quoted price. Failure to submit sufficient information for the Government to determine technical acceptability and quoted price may cause for rejection of your quote. Please complete the attached SF 1449 including Section G and return the quote.
Your submitted responses are appreciated. Interested vendors should provide information regarding this solicitation by email to Shinita Jordan at shinita.m.jordan@usace.army.mil and Sonia Boyd at Sonia.J.Boyd@usace.army.mil by Friday, March 28, 2025, 3:00pm CT.
Update #1 ·
This is a combined synopsis/solicitation being issued to procure SUPPLY - 3D PotterBot SCARA V4+ Auger System. The supply must be available for delivery to Vicksburg, Mississippi.
The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price, and other factors considered. The following factors shall be used to evaluate offers:
1. Lowest Price and
2. Technically Acceptable
See attached solicitation for full requirements. It is imperative that the offeror submit sufficient documentation and information for the
Government to determine technical acceptability and quoted price. Failure to submit sufficient information for the Government to determine technical acceptability and quoted price may cause for rejection of your quote. Please complete the attached SF 1449 including Section G and return the quote.
Your submitted responses are appreciated. Interested vendors should provide information regarding this solicitation by email to Shinita Jordan at shinita.m.jordan@usace.army.mil and Sonia Boyd at Sonia.J.Boyd@usace.army.mil by Friday, February 28, 2025, 3:00pm CT.
Files
| File | Type | Posted |
|---|---|---|
| W912HZ25Q0015-0001.pdf | ||
| W912HZ25Q0015.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| 3D PotterBot 4000ml Extruder | Award Notice | |
| This notice | Solicitation | |
| 3D PotterBot Additive Manufacture Machine Supply Purchase | Special Notice |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| 3389 Large Class Hopper Dredge (LCHD-ESS) | ENDIST Philadelphia | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity