30, 000 Gallon Horizontal S/Stl Storage Tank

NASA Shared Services Center seeks procurement and delivery of one 30,000-gallon horizontal stainless steel storage tank, with quotes due May 26 at 3:00 p.m. Central Time. This is a Total Small Business Set-Aside under FAR 19.5.

Place of performance is Stennis Space Center, Mississippi. The tank must be fabricated to ASME Boiler Pressure Vessel Code Section VIII Division 1 standards (design only, code stamp not required) from SA-240 304/304L stainless steel with a design pressure of 15 psig and minimum fluid temperature capability of -423°F. The vessel will contain either liquid hydrogen or liquid methane in a non-jacketed configuration with forced boil-off through a vent/bleed line. Shell thickness is 1/4 inch nominal minimum; heads are 3/8 inch minimum. Nozzle configuration includes one 4-inch, one 6-inch, two 18-inch openings, and one 24-inch manway with davit, all fitted with Class 150 Raised Face Weld Neck flanges. No pressure relief systems, valves, or piping are supplied by the contractor. The vendor must provide material certificates, hydro/pneumatic test reports per ASME standards, and as-built drawings signed by a NASA engineer. Fabrication requires spot radiography, interior and exterior mill finish, and passivated surfaces using qualified welders.

Offerors must be registered in SAM.gov and represent small business status. All contractual and technical questions must be submitted in writing via email to Kacey Hickman (kacey.l.hickman@nasa.gov) by May 25 at 3:00 p.m. Central Time. Award will be made on lowest price technically acceptable criteria to the responsible offeror submitting a conforming quote. NAICS code is 332420, Metal Tank (Heavy Gauge) Manufacturing. Quotes remain valid for 30 days. FOB Destination delivery terms apply.