190th CE FY16 190th CE Fencing Repairs, Forbes Field, Topeka, KS

AMENDMENT 3 - Due date is revised to May 19, 2016 at 2:00 CT.  Additional questions have been received and answers to those questions are pending.  Another Amendment will be posted when the answers become available.


THIS PROJECT IS OPEN ONLY TO THE KSARNG AND KSANG APPROVED MATOC CONTRACTORS.

This project is for the 190th CE FY 16 Fencing Repairs.

PRE-BID MEETING will be held on Tuesday, 19 Apr 16 at 10:00 a.m. CST, CE Bldg 760, Classroom Forbes Field, Topeka, KS.

PROPOSALS will be due on Tuesday, May 19, 2016 at 2:00 p.m., CST. 

Project Title and Project Description:

   

PROJECT DESCRIPTION:  Submit a bid for each line item of work to be done. The purpose of this contract is to install, modify existing, or replace force protection measures around designated facilities in accordance with UFC 4-022-03. This contract will also repair sections of failing asphalt near the flight line side of building 662. Fence product used will be Type A, galvanized, 2 inch square mesh, woven 9 gauge steel wire fabric chain link fence 7 feet high, surmounted by three strands of barbed wire angled outward at 45 degrees for a total height of 8 feet. Chain-link fabric tautness requirements can be found in UFGS (32 3100.00 10 / 32 31 13.00 20 / 32 31 13.00 40). Provide chain link fencing components and accessories in accordance with ASTM standards F1043, F626, A817, A824, F1083 and F1664. All fencing and components will be commercial grade. Use non-reflective coating for fences to reduce glare that could affect remote camera and visual assessment.

Amendment 2 dated 05/03/2016:

Question received from Concrete Unlimited Construction, Inc. :

"Are there any design requirements and or details available for the mow strip and the new footings for the brick column?"

Answer provided:

1.  All mow strip thicknesses shall be 3.5" minimum thickness.  Width shall either match existing in areas that will be repaired/patched or shall be 20" min. with in areas requiring the creation of a new mow strip.

2.  At the brick decorative fence, concrete foundation beneath northwest column shall be adequately constructed to fully support the load of the column and the attached fence.


Also in regards to the AT Level I Training requirements - this amendment removes the requirement for Subcontractor employees to complete AT Level I Awareness Training.  ONly the general contractor employees will be required to complete the AT Level I Awareness Training. 

All other terms, conditions, and deadlines remain unchanged.

The following updates are attached and should be reviewed by all offeror's on this project:

Statement of work revised, Dated April 19, 2016- Bid Item # 3 removed in it's entirety.
Wage Determination, revised, Dated 04/15/2016
Pre-Bid Meeting Attendance Roster attached
Notice of Proposed Task Order Proposal, revised April 21, 2016
Due Date is Changed from May 10, 2016 to May 16, 2016
Evaluation factors have been revised.  Past Performance is significantly more importmant than Price.

THIS PROJECT IS OPEN ONLY TO THE KSARNG AND KSANG APPROVED MATOC CONTRACTORS.

This project is for the 190th CE FY 16 Fencing Repairs.

PRE-BID MEETING will be held on Tuesday, 19 Apr 16 at 10:00 a.m. CST, CE Bldg 760, Classroom Forbes Field, Topeka, KS.

PROPOSALS will be due on Tuesday, 10 May 16 at 2:00 p.m., CST. 

Project Title and Project Description:

   

PROJECT DESCRIPTION:  Submit a bid for each line item of work to be done. The purpose of this contract is to install, modify existing, or replace force protection measures around designated facilities in accordance with UFC 4-022-03. This contract will also repair sections of failing asphalt near the flight line side of building 662. Fence product used will be Type A, galvanized, 2 inch square mesh, woven 9 gauge steel wire fabric chain link fence 7 feet high, surmounted by three strands of barbed wire angled outward at 45 degrees for a total height of 8 feet. Chain-link fabric tautness requirements can be found in UFGS (32 3100.00 10 / 32 31 13.00 20 / 32 31 13.00 40). Provide chain link fencing components and accessories in accordance with ASTM standards F1043, F626, A817, A824, F1083 and F1664. All fencing and components will be commercial grade. Use non-reflective coating for fences to reduce glare that could affect remote camera and visual assessment.

THIS PROJECT IS OPEN ONLY TO THE KSARNG AND KSANG APPROVED MATOC CONTRACTORS.

This project is for the 190th CE FY 16 Fencing Repairs.

Project Title and Project Description:

   

PROJECT DESCRIPTION:  Submit a bid for each line item of work to be done. The purpose of this contract is to install, modify existing, or replace force protection measures around designated facilities in accordance with UFC 4-022-03. This contract will also repair sections of failing asphalt near the flight line side of building 662. Fence product used will be Type A, galvanized, 2 inch square mesh, woven 9 gauge steel wire fabric chain link fence 7 feet high, surmounted by three strands of barbed wire angled outward at 45 degrees for a total height of 8 feet. Chain-link fabric tautness requirements can be found in UFGS (32 3100.00 10 / 32 31 13.00 20 / 32 31 13.00 40). Provide chain link fencing components and accessories in accordance with ASTM standards F1043, F626, A817, A824, F1083 and F1664. All fencing and components will be commercial grade. Use non-reflective coating for fences to reduce glare that could affect remote camera and visual assessment.