155mm Linear Variable Displacement Transducers Equipment
Closed Solicitation Posted
- Solicitation number
- W911S226U3368
- Agency
-
MICC Fort Drum
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 334519 Other Measuring and Controlling Device Manufacturing
- Place of performance
- Us Army Yuma Proving GROUND301 C Streetyuma, AZ 85365 85365
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Mission and Installation Contracting Command Fort Drum seeks 155mm linear variable displacement transducers equipment, with proposals due July 1, 2026. The procurement is a Total Small Business set-aside, restricting competition to certified small businesses.
Place of performance is Yuma, Arizona (301 C Street, Yuma, AZ 85365). The solicitation requires two distinct deliverables: a 155mm Calibration Guide Tube Assembly that permits removal of the calibration ring while attached to the cannon muzzle and accommodates crawler and LBIS/LVDT sensors; and a 155mm Self-Propelled Sensor Delivery Unit capable of pushing or pulling 120mm sensors over an axial distance of no less than 35 feet. The SDU must include a muzzle adapter compatible with 155mm gun tubes, interface with existing YPG-owned LBIS/LVDT/VBIS sensors, provide a flexible cable with non-scratch protective cover, and enable data acquisition across the full 155mm bore length and to the muzzle. Linear resolution must be 0.010 inch or better, with unidirectional position repeatability of 0.040 inch or better. The NAICS code is 334519, Other Measuring and Controlling Device Manufacturing; the PSC code is 6650, Optical Instruments, Test Equipment, Components and Accessories.
Notice text
1. 155mm Calibration Guide Tube Assembly for use with LVDT Scanner Assembles ? The GTA shall allow the calibration ring to be removed while the GTA is attached to the cannon muzzle, allowing calibration to be performed with the GTA attached to the cannon muzzle.? The length of GTA shall support holding the crawler and LBIS and LVDT sensors, while allowing removal of the calibration ring of the cannon tube 155mm M284 and M776 models2. 155mm Self-Propelled Sensor Delivery Unit (SDU shall meet the following specifications? The SDU shall be capable of pushing or pulling the sensor 120mm sensors over an axial distance of no less than 35 feet).? The SDU shall be provided with a muzzle adapter that is capable of being mounted to 155mm gun tubes.? The SDU shall be capable of being interfaced with existing YPG-owned 155mm LBIS/LVDT/VBIS sensors.? The SDU shall be provided with a flexible cable that includes a non-scratch protective cover.? The SDU shall be capable of allowing data acquisition over the full length of the 155 mm bore and up to the muzzle.? Linear resolution shall be 0.010? or better? Uni-directional position repeatability goal shall be 0.040? or better
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Test Equipment, Source Measure Units | MICC Fort Drum | Total Small Business | |
| ICP-OES for Oil Analysis | MICC Fort Drum | Total Small Business | |
| Rugged Spectrometers | MICC Fort Drum | Total Small Business | |
| Minicams parts | MICC Fort Drum | Total Small Business | |
| Cylinders | MICC Fort Drum | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity