13th ACSC Stratasys Origin Two and Stratasys F370CR 3D Printers
Closed Solicitation Posted
- Solicitation number
- W56ZLW26Q0019
- Agency
-
Department of the Army
Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333248 All Other Industrial Machinery Manufacturing
- Place of performance
- Fort Hood, Texas 76544, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army seeks a turnkey additive manufacturing solution comprising one Stratasys Origin Two polymer 3D printer and one Stratasys F370CR composite-ready 3D printer, with proposals due July 15, 2026 at 4:00 PM Central Daylight Time. The procurement is set aside for Women-Owned Small Businesses and competition is limited to authorized Stratasys distributors and resellers.
Place of performance is Fort Hood, Texas. The Origin Two must have a minimum build volume of 192 mm x 108 mm x 370 mm and produce high-accuracy end-use parts with complex geometries using programmable photopolymerization technology. The F370CR must have a minimum build volume of 355 x 254 x 355 mm and print with carbon fiber-reinforced thermoplastics. Delivery is required by August 30, 2026. The complete solution includes turnkey installation, configuration, and calibration; manufacturer-led on-site training conducted over 2–5 consecutive days after equipment is fully operational; all necessary software licenses and initial consumables; and a minimum 12-month manufacturer commercial warranty covering parts, labor, and software updates.
This is a Request for Quote under simplified commercial procedures on a firm fixed-price basis. Offerors must submit three volumes: Technical (maximum 10 pages) demonstrating OEM authorization and delivery capability; Past Performance (maximum 3 pages) with three recent references; and Pricing on SF 1449. Evaluation is sequential: Technical Capability (Acceptable/Unacceptable), Past Performance (Acceptable/Unacceptable), and Price (fairness, reasonableness, and completeness), with award to the responsible offeror offering the lowest total evaluated price. FOB Destination pricing with contractor-borne transportation is required. Questions are due July 9, 2026 at 4:00 PM CST. The NAICS code is 333248, All Other Industrial Machinery Manufacturing; PSC is 3695, Miscellaneous Special Industry Machinery.
Notice text
This requirement is for a turnkey additive manufacturing solution to establish an organic capability for producing replacement parts at Fort Hood, TX. The acquisition includes two specific industrial-grade 3D printers, along with all necessary services for immediate and sustained operation:
- Stratasys Origin Two (Polymer Printer): An industrial-grade 3D printer utilizing programmable photopolymerization (P3/DLP) technology. It must have a minimum build volume of 192 mm x 108 mm x 370 mm and be capable of producing high-accuracy end-use parts with complex geometries.
- Stratasys F370CR (Composite-Ready Printer): An industrial-grade Fused Deposition Modeling (FDM) 3D printer specifically designed for producing composite parts. It must have a minimum build volume of 355 x 254 x 355 mm and be capable of printing with high-strength, carbon fiber-reinforced thermoplastics.
The requirement also includes turnkey installation, configuration, and calibration of all equipment; manufacturer-led on-site training for operators; all necessary software licenses and initial consumables; and a comprehensive warranty and technical support package. Training shall be scheduled and conducted only after the printer has been fully installed, calibrated, and verified as operational. Training includes but not limited to system operation, job setup, maintenance, and troubleshooting.
All questions must be submitted in writing to the POCs listed below no later than 04:00 pm (CST), 9 July 2026.
komlan.e.dougah.mil@army.mil
austin.c.sanderson.mil@army.mil
Files
| File | Type | Posted |
|---|---|---|
| Solicitation - W56ZLW26Q0019.pdf | ||
| 3D Printer_RFO MFR_Limiting_Competition_under_SAT_Redacted.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Filament, additive man | Construction and Equipment | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity