120-155mm Cannon Laser Bore/ Chamber Add-on Kit
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- W911S225U0516
- Agency
-
MICC Fort Drum
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 334519 Other Measuring and Controlling Device Manufacturing
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The US Army Yuma Proving Ground is seeking a contractor to provide advanced laser bore and chamber add-on kits for 120mm and 155mm cannons. The solicitation requires a comprehensive system with specific technical specifications, including laser scanning modules with high-resolution capabilities and precise measurement standards. Key technical requirements include axial scan resolution of 0.25mm, rotary scan resolution of 0.1mm, and sensor resolution of 0.005mm, with measurement accuracy of at least 0.025mm in bore and 0.05mm in bore chamber. The contract demands Windows-10 based software with automatic sensor calibration, data storage compatibility, and advanced data analysis capabilities. The solicitation is open until April 21, 2025, with a posted date of March 12, 2025, targeting innovative measurement and control device manufacturers.
This opportunity is designated as a Total Small Business set-aside, focusing on the NAICS category 334519 for Measuring and Controlling Device Manufacturing. The contract will involve providing two complete laser bore gauging kits: one for 120mm cannons and another for 155mm cannons, each including guide tube assemblies, calibration rings, and specialized software. Each kit requires hard-sided shipping storage cases and must meet stringent quality assurance provisions, including a full one-year warranty. The procurement is being managed by the Department of the Army Materiel Command Mission and Installation Contracting Command at Fort Drum, with performance likely occurring at the Yuma Proving Ground facility. While specific award value is not disclosed, the detailed technical specifications suggest a sophisticated and potentially high-value contract focused on precision measurement technology for military cannon systems.
Notice text
2 versions
Update #2 · Latest ·
New 120-155mm Cannon Laser Bore Chamber Add-on Kit capability for 120-155mm cannon gun tubes. This acquisition shall be capable of use for: Precision non-contact bore measurement of 120-155 mm cannon smooth and rifle gun tubes. Measurement to the end of the muzzle with a guide tube adaptor that attaches to the muzzle, for supporting none-contact gauge and rigid or self-propelled delivery unit Laser cannon tube bore and chamber gauging kit shall employ a set of opposed high-resolution sensors that are automatically none-contact the bore chamber along its length to muzzle end of cannon tube.1. The 120mm Cannon Laser Add-on Bore Gauging Kit shall be operated as a complete turn-key unit and include the following major components:120mm Cannon Bore Chamber Add-on kit Guide tube assembly Certified calibration ring (5 steps) Laser Bore Chamber Calibration Workspace Software2. The 155mm Cannon Laser Add-on Bore Gauging Kit shall be operated as a complete turn-key unit and include the following major components:155mm Cannon Bore Chamber Add-on kit Guide tube assembly Certified calibration ring (5 steps) Laser Bore Chamber Calibration Workspace Software3. The Laser bore chamber scanning modules shall meet the following specifications Axial scan resolution: 0.25mm (0.01 inch) minimum Rotary scan resolution: 0.1mm (0.004 inch) minimum Sensor Resolution: 0.005mm (0.00025 inch)Laser spot size: 0.050mm (0.002 inch) minimum Measurement repeatability: 0.012mm (0.0005 inch)Measurement Accuracy: minimum of 0.025mm (0.001 inch) in bore and 0.05mm (0.002?) in bore chamber Angular Sampling Resolution: Variable ? up to 0.1 degrees per sample (3,600 samples per revolution)Measuring Range (diameter): Chamber Bore Size Minimum Range Maximum Range120mm 4.7000 in 6.3000 in155mm 6.1950 in 6.8000in 4.Each Calibration Ring shall have five steps (diameters) minimum within the center 75% of the range of the gauge The Calibration Rings shall be measured with a NIST-traceable. A2LA Accredited, ISO 17025 and ANS/INCL Z540-1-1994 standards5.Automatic Sensor Calibration software shall be capable of conducting an automatic calibration routine Calibration Software shall provide a Pass/Fail display of calibration test results If the calibration fails, the software shall automatically calculate corrected calibration parameters Calibration software shall allow the operator to manually adjust offset and slope of the calibration algorithm6. Data analysis shall be supported by existing analysis software, with modification if required to meet the requirements in this specification Analysis modules for post processing of data including but not limited to calculating: land and groove diameter, area, statistics, reference subtraction, rotate data, remove centering offset, remove undefined data, remove bad data, variable median filter, averaging filter
Update #1 ·
US Army Yuma Proving Ground shall furnish to contractor following test items for upgrade, system configuration and integration:120mm scanner /sensor hard-sided shipping storage case120mm GTA hard-sided shipping storage case155mm scanner /sensor hard-sided shipping storage case155mm GTA hard-sided shipping storage case The system shall include the following items:One ea. 120mm Cannon Laser Bore Chamber Add-on KitOne ea. 155mm Cannon Laser Bore Chamber Add-on KitThe 120mm Cannon Laser Add-on Bore Gauging Kit shall be operated as a complete turn-key unit and include the following major components:120mm Cannon Bore Chamber Add-on kitGuide tube assembly Certified calibration ring (5 steps)Laser Bore Chamber Calibration Workspace SoftwareThe 155mm Cannon Laser Add-on Bore Gauging Kit shall be operated as a complete turn-key unit and include the following major components:155mm Cannon Bore Chamber Add-on kitGuide tube assembly Certified calibration ring (5 steps)Laser Bore Chamber Calibration Workspace SoftwareThe Laser bore chamber scanning modules shall meet the following specificationsAxial scan resolution: 0.25mm (0.01 inch) minimumRotary scan resolution: 0.1mm (0.004 inch) minimumSensor Resolution: 0.005mm (0.00025 inch)Laser spot size: 0.050mm (0.002 inch) minimumMeasurement repeatability: 0.012mm (0.0005 inch)Measurement Accuracy: minimum of 0.025mm (0.001 inch) in bore and 0.05mm (0.002?) in bore chamberAngular Sampling Resolution: Variable ? up to 0.1 degrees per sample (3,600 samples per revolution)Measuring Range (diameter):Chamber Bore Size Minimum Range Maximum Range120mm 4.7000 in 6.3000 in155mm 6.1950 in 6.8000 inGuide Tube Adapter (GTA)The GTA shall be fitted to muzzle end of 120mm M256 tube model and 155mm XM1299 tube model The GTA shall allow the calibration ring to be removed while the GTA is attached to the cannon muzzle, allowing calibration to be performed with the GTA attached to the cannon muzzleCalibration Ring Set, Guide Tube AdapterEach Calibration Ring shall have five steps (diameters) minimum within the center 75% of the range of the gaugeThe Calibration Rings shall be measured with a NIST-traceable. A2LA Accredited, ISO 17025 and ANS/INCL Z540-1-1994 standardsLaser bore chamber Calibration Workspace SoftwareThe calibration workspace shall meet the requirements outlined in the software sectionSoftwareGeneralData storage shall be compatible with existing YPG Laser bore mapping dataOperating system shall be Windows -10 based platform System Software License Registration shall be in Soft Key type.Automatic Sensor CalibrationCalibration software shall be capable of conducting an automatic calibration routine Calibration Software shall provide a Pass/Fail display of calibration test resultsf the calibration fails, the software shall automatically calculate corrected calibration parameters Calibration software shall allow the operator to manually adjust offset and slope of the calibration algorithmScanningLaser scan style shall be incremental or helix with the Laser head rotating to collect measurements over 360 degrees at each axial locationAxial and rotary resolution of scans to be user-settable.Data DisplayZoom, pan display functionsProcessed data file and bitmap image exportMultiple, operator-adjustable color palette application to any Color Plot display, with rainbow, thermal grey-scale, and solid color palettesData AnalysisData analysis shall be supported by existing analysis software, with modification if required to meet the requirements in this specificationAnalysis modules for post processing of data including but not limited to calculating: land and groove diameter, area, statistics, reference subtraction, rotate data, remove centering offset, remove undefined data, remove bad data, variable median filter, averaging filterQUALITY ASSURANCE AND WARRANTY PROVISIONSPreservation, packaging and packing shall be in accordance with the manufacturer?s commercial practice.All components shall be covered by a full one-year warranty.Shipping and handling shall be included.
Notice history
| Notice | Type | Posted |
|---|---|---|
| 120-155mm Cannon Laser Bore/ Chamber Add-on Kit | Award Notice | |
| This notice | Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Manufacture of M284A2 155mm and other MTC Cannon Tubes | ACC Picatinny | No set-aside | |
| Sight, Bore Optical | Land and Maritime | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity