1 NSN sources sought

***Sources Sought***

This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10. 

                                          NO SOLICITATION IS BEING ISSUED AT THIS TIME.  

The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below.  Please review the below NSNs and provide us with any additional sources that are able to manufacture these items.  Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information.  All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil.  Phone 614 692-0639. We thank you in advance for your assistance.

NSN            NAME                
4820-01-550-4881    VALVE, LINEAR, DIRECTIONAL CONTROL
    

VALVE, LINEAR, DIRECTIONAL CONTROL

(SHUTTLE VALVE ASSEMBLY)

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
     (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
     DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
     AT:

     http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

     FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
     SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE
     ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
     APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
     REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND
     NON-MANUFACTURERS)

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
     REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

Q0037: CLAUSE 52.246-15, CERTIFICATE OF CONFORMANCE<(>,<)>
     IS NOT AUTHORIZED FOR THIS NSN UNLESS APPROVED BY THE ESA.

ZQA03: THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM
     (CSI).

     ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE
     FORWARDED TO THE DSC CONTRACTING OFFICER FOR
     REVIEW AND APPROVAL.
     .
     ALL ITEMS OF SUPPLY SHALL BE MARKED IAW
     MIL-STD-129.  IN ADDITION, EACH UNIT PACK WILL
     BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),
     CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S
     CAGE CODE AND PART NUMBER.

 CRITICAL APPLICATION ITEM

     IAW BASIC DRAWING NR 16236 RE-015504881
     REVISION NR     DTD 09/23/2021
     PART PIECE NUMBER:

     IAW REFERENCE STD NR MIL-STD-1330D(1)
     REVISION NR D   DTD 06/28/2007
     PART PIECE NUMBER:

PREP FOR DELIVERY

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
     QUP:001  PRES MTHD:33  CLNG/DRY:Z  PRESV MAT:00
     WRAP MAT:ZZ  CUSH/DUNN MAT:00  CUSH/DUNN THKNESS:0
     UNIT CONT:D3  OPI:M
     INTRMDTE CONT:E5  INTRMDTE CONT QTY:AAA
     PACK CODE:U
     MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
     SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

     PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
      REQUIREMENTS FOR PROCUREMENT

CS284: EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN,
     CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE
     CODE, MANUFACTURER CAGE CODE, AND PART NUMBER.

IP042: Oxygen Clean Packaging and Marking Requirements Apply

CLEANING SHALL BE IAW THE REQUIREMENTS OF MIL-STD-1330D.

     "Unit, intermediate, and exterior shipping container shall be marked in
     accordance with MILSTD129.
     In addition, each level of packing shall contain a label, marked with
     letters, maximum two inches and minimum one-half inch high on two (2) sides 
     and two (2) ends as follows:
     "SPECIAL CLEAN O2N2"

---------------------------------------------------------------
Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary.