Y25-764_Drawings.pdf

PDF 21 MB Posted Mar 5, 2025

Attached to: Corrections CEP 1 Fire Pump System Replacement
Solicitation number: Y25-764
Issued by: Orange County, Orlando City, Florida

About this file

Written by GovTribe AI · May 11, 2025

The documents are construction design and engineering plans for the Orange County Corrections CEP Fire Pump System Replacement project located at 2400 33rd Street, Orlando, Florida. The project involves replacing the existing fire pump system, including removing the current fire pump and installing a new Allis Chamlers 8x8x17F fire pump with a digital soft start controller and transfer switch. The project is part of a solicitation (Y25-764) with sealed bids due by 4:00 pm EST on May 8, 2025, and an estimated project cost of $850,000.00. The project will be completed using 100% construction documents dated February 7, 2025, prepared by Atkins Limited.

The design documents detail comprehensive electrical, site utility, and fire protection system modifications, including new electrical one-line diagrams, panel schedules, generator specifications, and fire pump controller details. The project requires compliance with NFPA 20 (2019 Edition) and the Florida Fire Prevention Code, 8th Edition. The water supply will be sourced from a 12-inch main connected to John Young Parkway and 33rd Street, with a documented flow test performed on June 21, 2022, showing a static pressure of 62 PSI and a flow rate of 1600 GPM. Bidders must submit responses electronically through the OpenGov e-Procurement Platform, with technical support available via chat, email, and phone.

View the file

Other files

File	Type	Posted
Corrections_CEP_1_Fire_Pump_System_Replacement_(Addendum_#1_Revision).pdf	PDF	Apr 29, 2025
Y25-764_Specifications.pdf	PDF	Mar 5, 2025

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

E-001

ELECTRICAL LEGEND,

SYMBOLS AND GENERAL

NOTES

Sheet Number:Designed By:

JOB No. 100058985

Phase:

Checked By:

Date Issued: FEBRUARY 7, 2025

PROFESSIONAL SEALS:

CLIENT:

SHEET TITLE:

ISSUE LOG

CONSULTANT:

QC Review:

SHEET INFORMATION:

PROJECT NAME:

No. Date Description

O ra ng e

Co un ty C or re ct io ns C

Fi re P um p

Sy st em R ep la ce m en t

3r d St re et

, O rla nd o

FL PE NO. 50064

SALVADOR PEREZ, P.E.

C:\Users\BAEZ6528\OneDrive\Documents\100058985 OC Pump\atkinsrealislogo.png

ARCHITECTURE, INTERIORS, CIVIL

STRUCTURAL, LANDSCAPE, MECHANICAL

PLUMBING, FIRE PROTECTION, ELECTRICAL

FIRE ALARM

ATKINS DESIGN TEAM

482 SOUTH KELLER ROAD

ORLANDO, FL 32810

TEL: +1 407 647 7275

FAX: +1 407.740.8958

www.atkinsglobal.com

100% CD

AutoCAD SHX Text

%%UPOWER DISTRIBUTION

AutoCAD SHX Text

%%USWITCHES

AutoCAD SHX Text

%%UWIRING

AutoCAD SHX Text

%%UFIRE ALARM

AutoCAD SHX Text 20A, MANUAL MOTOR STARTER TOGGLE SWITCH WITH PILOT LIGHT AND WITHOUT OVERLOADS. 3 = NUMBER OF POLES. 20A. MOTOR RATED SWITCH. NON-FUSED SAFETY SWITCH, 3 = NO. OF POLES, 60 = SWITCH SIZE. 600 V. UNLESS OTHERWISE NOTED. FUSED SAFETY SWITCH, 3 = NO. OF POLES, 60 = SWITCH SIZE, 50 = FUSES SIZE. 600 V. UNLESS OTHERWISE NOTED. INDIVIDUALLY MOUNTED ENCLOSED CIRCUIT BREAKER, 3 = NO. OF POLES, 100 = FRAME SIZE, 70 = TRIP RATING. 600 V. UNLESS OTHERWISE NOTED.

AutoCAD SHX Text

%%UABBREVIATIONS

AutoCAD SHX Text

%%UGENERAL NOTES

AutoCAD SHX Text

1. THE WORK PRACTICES EMPLOYED ON THIS PROJECT SHALL AT ALL TIMES THE WORK PRACTICES EMPLOYED ON THIS PROJECT SHALL AT ALL TIMES COMPLY WITH OR EXCEED THE 2020 NEC (NATIONAL ELECTRICAL CODE) AND THE 2023 FBC (FLORIDA BUILDING CODE) AS THE LATEST CODE EDITIONS . ELECTRICAL CONTRACTOR SHALL PROVIDE OR OBTAIN ALL REQUIRED LABOR, MATERIAL , EQUIPMENT, INSURANCE, TOOLS, PERMITS, INSPECTIONS, ETC. TO PERFORM THE PROJECT ELECTRICAL WORK AS PER NEC, LOCAL AGENCIES, AND OWNER REQUIREMENTS. 2. A COPPER EQUIPMENT GROUNDING CONDUCTOR, SIZED AS PER TABLE 250-22 A COPPER EQUIPMENT GROUNDING CONDUCTOR, SIZED AS PER TABLE 250-22 OF THE 2020 OR LATEST ADOPTED NEC, SHALL BE INSTALLED IN EVERY RACEWAY AND EFFECTIVELY TERMINATED AT EACH DEVICE. UNLESS NOTED OTHERWISE, MINIMUM WIRE SIZE FOR PHASE, NEUTRAL AND GROUND SHALL BE #12AWG AND MINIMUM CONDUIT SIZE SHALL BE 3/4". 3. CONDUCTORS #8AWG AND LARGER SHALL BE STRANDED COPPER, #10AWG AND CONDUCTORS #8AWG AND LARGER SHALL BE STRANDED COPPER, #10AWG AND SMALLER SHALL BE SOLID COPPER TYPE THHN/THWN-2 UNLESS NOTED OTHERWISE. 4. PROVIDE HANGER, CONDUIT SUPPORTS, JUNCTION BOXES, ETC. PER NEC PROVIDE HANGER, CONDUIT SUPPORTS, JUNCTION BOXES, ETC. PER NEC REQUIREMENTS ACCORDING TO THEIR LOCATION. 5. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR ANY CUTTING AND ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR ANY CUTTING AND PATCHING REQUIRED TO PERFORM THE ELECTRICAL WORK. OWNER/GENERAL CONTRACTOR SHALL BE NOTIFIED BEFORE STARTING ANY CUTTING AND PATCHING, AND WORK SHALL BE DONE IN SUCH A MANNER THAT WILL NOT AFFECT THE BUILDING STRUCTURE. ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR ANY DAMAGE AS A RESULT OF THE CUTTING AND PATCHING AND SHALL PROVIDE A CODE COMPLIANT SOLUTION TO RESTORE THE AFFECTED SYSTEMS AT NO EXTRA CHARGE. 6. ELECTRICAL CONTRACTOR SHALL FOLLOW OWNER/GENERAL CONTRACTOR, ELECTRICAL CONTRACTOR SHALL FOLLOW OWNER/GENERAL CONTRACTOR, NATIONAL AND LOCAL AGENCIES, ETC. SAFETY REGULATIONS PROCEDURES. ELECTRICAL CONTRACTOR SHALL PROVIDE ADEQUATE EQUIPMENT AND WORKING AREA PROTECTION TO PREVENT INJURIES TO PEOPLE AND DAMAGE TO PROPERTY. 7. FULLY TEST ALL ELECTRICAL SYSTEMS UPON COMPLETION OF WORK. FULLY TEST ALL ELECTRICAL SYSTEMS UPON COMPLETION OF WORK. 8. IT IS THE BIDDER'S RESPONSIBILITY TO INSPECT THE PROJECT SITE AND IT IS THE BIDDER'S RESPONSIBILITY TO INSPECT THE PROJECT SITE AND CONSTRUCTION DOCUMENTS PRIOR TO BIDDING. FAILURE TO DO SO SHALL NOT RELIEVE THE ELECTRICAL CONTRACTOR TO COMPLY AND PERFORM HIS/HER WORK RESPONSIBILITIES UNDER THIS CONTRACT. 9. LABEL EACH SWITCH, RECEPTACLE, PANEL, AND JUNCTION BOXES WITH SOURCE LABEL EACH SWITCH, RECEPTACLE, PANEL, AND JUNCTION BOXES WITH SOURCE PANEL AND CIRCUIT NUMBER. 10. VERIFY PHASE ROTATION ON ALL THREE-PHASE EQUIPMENT (DISCONNECTS, VERIFY PHASE ROTATION ON ALL THREE-PHASE EQUIPMENT (DISCONNECTS, RECEPTACLES, ETC.) 11. ALL CIRCUIT BREAKERS SHALL BE BOLT-ON TYPE. CIRCUIT BREAKERS ALL CIRCUIT BREAKERS SHALL BE BOLT-ON TYPE. CIRCUIT BREAKERS PROTECTING POWER PANELS, TRANSFORMERS, AND MOTORS SHALL BE 100%. CIRCUIT BREAKERS PROTECTING HEATING, AIR CONDITIONING AND REFRIGERATION EQUIPMENT SHALL BE HACR RATED. 12. RUN POWER DISTRIBUTION CONDUITS AND HOME RUNS ABOVE THE BOTTOM OF RUN POWER DISTRIBUTION CONDUITS AND HOME RUNS ABOVE THE BOTTOM OF TRUSSES TO AVOID FIRE RATED WALL PENETRATIONS. IF A FIRE WALL PENETRATION IS REQUIRED, THE ELECTRICAL CONTRACTOR SHALL USE AND PROVIDE A WALL PENETRATION PROCEDURE AND INSTALLATION APPROVED BY THE A.H.J. FOR THE FIRE RATED WALL TO BE PENETRATED. 13. FIELD COORDINATE FINAL CONDUITS LOCATION WITH OTHER DISCIPLINES WORK FIELD COORDINATE FINAL CONDUITS LOCATION WITH OTHER DISCIPLINES WORK AND EXISTING CONDITIONS. 14. PROVIDE CUT AND PATCHING AS NECESSARY TO INSTALL REQUIRED PROVIDE CUT AND PATCHING AS NECESSARY TO INSTALL REQUIRED UNDERGROUND RACEWAYS AND ABOVE-GRADE ROUTING FOR A COMPLETE AND FULLY FUNCTIONAL ELECTRICAL SYSTEM.

AutoCAD SHX Text AMPERES ABOVE COUNTER ABOVE FINISHED FLOOR AVAILABLE FAULT CURRENT AUTHORITY HAVING JURISDICTION AMPERES INTERRUPTING CAPACITY, SYMMETRICAL AUTOMATIC TRANSFER SWITCH CIRCUIT BREAKER CIRCUIT CONDUIT DISCONNECT EMERGENCY EXISTING EMPTY CONDUIT ELECTRIC WATER COOLER ELECTRIC WATER HEATER ENCLOSURE INDICATES EXISTING TO REMAIN EXPLOSION PROOF EQUIPMENT, CLASS 1, GROUP D HAZARDOUS AREA FIRE ALARM CONTROL PANEL FLORIDA POWER CORPORATION GROUND FAULT INTERRUPTER GROUND GALVANIZED RIGID STEEL CONDUIT HEATING, AIR CONDITIONING, AND REFRIGERATION HIGH INTENSITY DISCHARGE HORSE POWER INTERCOM ILLUMINATION ENGINEERING SOCIETY ISOLATED GROUND JUNCTION BOX KEY OPERATED DEVICE KILOWATT MOTOR CONTROL CENTER NATIONAL ELECTRICAL CODE PILOT LIGHT PUBLIC ADDRESS PANELBOARD POLYVINYL CHLORIDE CONDUIT SPARE CONDUIT SWITCH TELEPHONE TERMINAL BOARD TELEPHONE TERMINAL CABINET TRANSFORMER UNLESS OTHERWISE NOTED VOLT AMPERES INDICATES WEATHERPROOF EQUIPMENT

AutoCAD SHX Text A AC A.F.F. A.F.C. A.H.J. A.I.C. A.T.S. C.B. CKT. COND., C. DISC. EMERG. E E.C. E.W.C. E.W.H. ENCL. ETR EXP. F.A.C.P. FPC GFI GND, G. GRS HACR HID HP IC IES IG JB K KW MCC NEC P PA PNL. PVC SP SW. T.T.B. T.T.C. XFMR U.O.N. VA WP

AutoCAD SHX Text SMOKE DETECTOR, IONIZATION TYPE. "F" DENOTES MOUNTED UNDER RAISED FLOOR. DUCT MOUNTED, IONIZATION TYPE SMOKE DETECTOR "S" DENOTES SUPPLY, "R" DENOTES RETURN AIR GRILL. HEAT DETECTOR REMOTE TEST SWITCH FOR DUCT MOUNTED SMOKE DETECTOR. MOUNT 4'-0" A.F.F. FIRE ALARM CONTOL PANEL FIRE ALARM VOICE PANEL FIRE ALARM ANNUNCIATOR PANEL

AutoCAD SHX Text SINGLE CIRCUIT HOMERUN TO PANEL WITH MINIMUN OF 2 #12AWG CIRCUIT WIRES AND 1 #12AWG GROUND WIRE IN A 3/4" CONDUIT, U.O.N.: "A" INDICATES PANEL DESIGNATION, NUMBER INDICATES CIRCUIT DESIGNATION. MULTIPLE CIRCUITS HOMERUN TO PANEL WITH MINIMUN OF 2 #12AWG WIRES PER CIRCUIT AND 1 #12AWG GROUND WIRE IN A 3/4" CONDUIT, U.O.N.: "A" INDICATES PANEL DESIGNATION, NUMBERS SEPARATED BY COMAS INDICATE INDIVIDUAL CIRCUIT DESIGNATIONS.

AutoCAD SHX Text POWER OR LIGHTING CIRCUIT BREAKER PANEL RECESSED MOUNTED ON WALL, SIZE AS INDICATED. DASHED LINE INDICATES REQUIRED CLEARANCE. POWER OR LIGHTING CIRCUIT BREAKER PANEL SURFACE MOUNTED ON WALL, SIZE AS INDICATED. DASHED LINE INDICATES REQUIRED CLEARANCE. MOTOR. WHEN SHOWN, NUMBER INSIDE INDICATES HORSEPOWER. GENERATOR-SIZE AS INDICATED MAGNETIC MOTOR STARTER COMBINATION MAGNETIC MOTOR STARTER AND DISCONNECT SWITCH. MOTOR CONTROL PUSHBUTTON OR SELECTOR SWITCH STATION. LIGHTING CONTACTOR TRANSFORMER

AutoCAD SHX Text

%%UBOXES AND FITTINGS

AutoCAD SHX Text

%%URECEPTACLES

AutoCAD SHX Text CEILING OR FLOOR MOUNTED JUNCTION BOX WALL MOUNTED JUNCTION BOX PULLBOX, SIZED AS INDICATED OR AS REQUIRED BY N.E.C.

AutoCAD SHX Text

GFI

AutoCAD SHX Text

GFI/WP

AutoCAD SHX Text SINGLE RECEPTACLE, 2P, 3W, GROUNDING TYPE, 20A, 125V, NEMA-5-20R. MOUNT 18" A.F.F. DUPLEX RECEPTACLE, 2P, 3W, GROUNDING TYPE, 20A, 125V, NEMA 5-20R. MOUNT 18" A.F.F. U.O.N. DUPLEX RECEPTACLE - SAME AS ABOVE EXCEPT WITH INTEGRAL GROUND FAULT CIRCUIT INTERRUPTER. DUPLEX CONVENIENCE RECEPTACLE - SAME AS ABOVE EXCEPT WITH 2-FLAP, SPRING-HINGED, GASKETED AND WEATHERPROOF COVER. DOUBLE DUPLEX RECEPTACLE IN ONE OUTLET BOX, 2P, 3W, GROUNDING TYPE, 20A, 125V, NEMA 5-20R. MOUNT 18" A.F.F. U.O.N. FLOOR MOUNTED DUPLEX RECEPTACLE, 2P, 3W, GROUNDING TYPE, 20A, 125V, NEMA 5-20R. FLOOR MOUNTED DOUBLE DUPLEX RECEPTACLE IN ONE OUTLET BOX, 2P, 3W, GROUNDING TYPE, 20A, 125V, NEMA 5-20R. MOUNT 18" A.F.F. U.O.N.

AutoCAD SHX Text J

AutoCAD SHX Text

AutoCAD SHX Text M

AutoCAD SHX Text

%%UMOTORS AND CONTROL

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text G

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text

NOTE: NOT ALL SYMBOLS APPLY TO THE PROJECT.

AutoCAD SHX Text S

AutoCAD SHX Text R

AutoCAD SHX Text D

AutoCAD SHX Text H

AutoCAD SHX Text D

AutoCAD SHX Text

FACP

AutoCAD SHX Text

FAVP

AutoCAD SHX Text

FAAP

AutoCAD SHX Text A-1

AutoCAD SHX Text A-1,3,5

AutoCAD SHX Text

AutoCAD SHX Text MOLDED CASE CIRCUIT BREAKER INDICATES DRAW-OUT EQUIPMENT FUSE FUSED DISCONNECT SWITCH SWITCH FUSE CUT-OUT SWITCH FUSED AIR -BREAK PRIMARY SWITCH ON-OFF MAGNETIC MOTOR STARTER OIL CIRCUIT BREAKER AMMETER SWITCH VOLTMETER SWITCH AMMETER VOLTMETER FUSED POTENTIAL TRANSFORMER CURRENT TRANSFORMER POWER TRANSFORMER WITH AUTOMATIC TAP CHANGER TRANSFORMER WYE CONNECTED DELTA CONNECTED POWER TRANSFORMER COUPLING CAPACITOR LIGHTNING SURGE ARRESTER GROUND CONNECTION MOTOR - NUMBER INDICATES HP GENERATOR - NUMBER INDICATES KW MOTOR. WHEN SHOWN, NUMBER OUTSIDE INDICATES HORSEPOWER NEW GENERATOR TO BE INSTALLED MAGNETIC CIRCUIT BREAKER FOR GENERATOR NEW AUTOMATIC TRANSFER SWITCH GROUND BONDING

AutoCAD SHX Text

%%UONE-LINE SYMBOLS

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text V

AutoCAD SHX Text

ED-101

CEP BUILDING

ELECTRICAL

DEMOLITION WORK

Sheet Number:Designed By:

JOB No. 100058985

Phase:

Checked By:

Date Issued: FEBRUARY 7, 2025

PROFESSIONAL SEALS:

CLIENT:

SHEET TITLE:

ISSUE LOG

CONSULTANT:

QC Review:

SHEET INFORMATION:

PROJECT NAME:

No. Date Description

O ra ng e

Co un ty C or re ct io ns C

Fi re P um p

Sy st em R ep la ce m en t

3r d St re et

, O rla nd o

FL PE NO. 50064

SALVADOR PEREZ, P.E.

C:\Users\BAEZ6528\OneDrive\Documents\100058985 OC Pump\atkinsrealislogo.png

ARCHITECTURE, INTERIORS, CIVIL

STRUCTURAL, LANDSCAPE, MECHANICAL

PLUMBING, FIRE PROTECTION, ELECTRICAL

FIRE ALARM

ATKINS DESIGN TEAM

482 SOUTH KELLER ROAD

ORLANDO, FL 32810

TEL: +1 407 647 7275

FAX: +1 407.740.8958

www.atkinsglobal.com

100% CD

CEP BUILDING UPPER PLAN - DEMOLITION

3/16" = 1'-0" 2

CEP BUILDING LOWER PLAN - DEMOLITION

3/16" = 1'-0"

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text DE-ENERGIZE, DISCONNECT AND REMOVE EXISTING FIRE PUMP CONTROLLER, CONDUCTORS, CONDUITS, AND ALL ASSOCIATED WIRING BACK TO SOURCE ON IT'S ENTIRETY. DE-ENERGIZE, DISCONNECT AND REMOVE EXISTING FIRE PUMP ATS-FP CABINET, CONDUCTORS, CONDUITS, AND ALL ASSOCIATED WIRING BACK TO SOURCE ON IT'S ENTIRETY. EXISTING JOCKEY PUMP CONTROLLER TO DE-ENERGIZE, DISCONNECT AND RELOCATE TO OPPOSITE WALL. DE-ENERGIZE, DISCONNECT AND REMOVE EXISTING FIRE PUMP SERVICE DISCONNECT, AND ALL ASSOCIATED WIRING AND CONDUIT BACK TO SOURCE. EXISTING JOCKEY PUMP SERVICE DISCONNECT TO BE REPLACE WITH NEW. EXISTING JOCKEY PUMP STEP DOWN TRANSFORMER TO REMAIN. EXISTING JOCKEY PUMP TO REMAIN. DE-ENERGIZE, DISCONNECT EXISTING FIRE PUMP CONTROLLER, VALVES, FLOW SWITCHES, MONITORING MODULES CONDUCTORS AND CONDUIT FROM THE FIRE ALARM SYSTEM TO THE EXISTING FIRE PUMP CONTROLLER BACK TO EXISTING FIRE ALARM LABELED JUNCTION BOX.

AutoCAD SHX Text

GENERAL DEMOLITION NOTES:

AutoCAD SHX Text A. THE CONTRACTOR SHALL VISIT AND CAREFULLY EXAMINE THOSE PORTIONS OF THE BUILDING AND SITE AFFECTED BY THIS WORK BEFORE SUBMITTING PROPOSAL SO AS TO BECOME FAMILIAR THE CONTRACTOR SHALL VISIT AND CAREFULLY EXAMINE THOSE PORTIONS OF THE BUILDING AND SITE AFFECTED BY THIS WORK BEFORE SUBMITTING PROPOSAL SO AS TO BECOME FAMILIAR WITH EXISTING WORK. SUBMISSION OF A PROPOSAL WILL BE CONSTRUED AS EVIDENCE. THAT SUCH EXAMINATION HAS BEEN MADE AND LATER CLAIMS FOR LABOR, EQUIPMENT OR MATERIALS REQUIRED BECAUSE BY DIFFICULTIES ENCOUNTERED WILL NOT BE RECOGNIZED. IT IS TO BE UNDERSTOOD THAT UNFORESEEN CONDITIONS PROBABLY EXIST AND NEW WORK MAY NOT BE FIELD LOCATED EXACTLY AS SHOWN ON THE DRAWINGS. COOPERATION WITH OTHER TRADES IN EQUIPMENT ROUTING AS DETERMINED DURING CONSTRUCTION AND AS DIRECTED BY THE ARCHITECT/ENGINEER MAY BE NECESSARY AND IT IS INTENDED THAT SUCH DEVIATIONS SHALL BE CONSIDERED AS PART OF THIS CONTRACT. IT IS ALSO UNDERSTOOD THAT THE PLANS ARE NOT COMPLETELY TO SCALE. THIS CONTRACTOR IS TO FIELD VERIFY DIMENSIONS OF ALL EXISTING CONDITIONS, PRIOR TO BID AND INCLUDE ANY DEVIATIONS IN THE CONTRACT. B. ALL DEVICES AND EQUIPMENT NOT SHOWN AND IN AREAS OUTSIDE OF CONSTRUCTION AREA SHALL REMAIN ACTIVE UNLESS OTHERWISE NOTED. INSTALL AS REQUIRED TO MAINTAIN CONTINUITY ALL DEVICES AND EQUIPMENT NOT SHOWN AND IN AREAS OUTSIDE OF CONSTRUCTION AREA SHALL REMAIN ACTIVE UNLESS OTHERWISE NOTED. INSTALL AS REQUIRED TO MAINTAIN CONTINUITY TO EXISTING DEVICES AND EQUIPMENT THAT REMAIN. C. ALL BRANCH CIRCUIT WIRING SHALL BE CONCEALED UNLESS OTHERWISE NOTED. ALL BRANCH CIRCUIT WIRING SHALL BE CONCEALED UNLESS OTHERWISE NOTED. D. ALL EQUIPMENT AND MATERIAL REMOVED AND NOT REUSED SHALL BE TURNED OVER TO THE OWNER OR AT THE OWNERS REQUEST DISPOSED OF BY THE CONTRACTOR. ALL EQUIPMENT AND MATERIAL REMOVED AND NOT REUSED SHALL BE TURNED OVER TO THE OWNER OR AT THE OWNERS REQUEST DISPOSED OF BY THE CONTRACTOR. E. ALL ELECTRICAL DEVICES THAT ARE REMOVED SHALL BE REMOVED AS DIRECTED BY THE OWNER, AND CEILING OR WALL SHALL BE PATCHED TO MATCH EXISTING OR NEW FINISH. ALL PATCHES ALL ELECTRICAL DEVICES THAT ARE REMOVED SHALL BE REMOVED AS DIRECTED BY THE OWNER, AND CEILING OR WALL SHALL BE PATCHED TO MATCH EXISTING OR NEW FINISH. ALL PATCHES OR CEILING PLATES SHALL BE PATCHED OR PAINTED AS DIRECTED BY ARCHITECT. F. ALL EXISTING ELECTRICAL EQUIPMENT IS NOT SHOWN. IT IS THE CONTRACTORS RESPONSIBILITY TO BECOME FAMILIAR WITH ALL EXISTING CONDITIONS PRIOR TO BID, AND INCLUDE IN HIS BID THE ALL EXISTING ELECTRICAL EQUIPMENT IS NOT SHOWN. IT IS THE CONTRACTORS RESPONSIBILITY TO BECOME FAMILIAR WITH ALL EXISTING CONDITIONS PRIOR TO BID, AND INCLUDE IN HIS BID THE REMOVAL OF ALL EQUIPMENT, CONDUIT, WIRE, ETC. THAT IS NOT BEING REUSED BACK TO ITS SOURCE. G. ALL CONCRETE, WALL PATCHING, CEILING REPAIR, AND OTHER GENERAL WORK REQUIRED FOR INSTALLING THE ELECTRICAL SYSTEMS AND TO REPAIR TO "LIKE NEW CONDITION" TO BE PROVIDED ALL CONCRETE, WALL PATCHING, CEILING REPAIR, AND OTHER GENERAL WORK REQUIRED FOR INSTALLING THE ELECTRICAL SYSTEMS AND TO REPAIR TO "LIKE NEW CONDITION" TO BE PROVIDED AND INSTALLED BY CONTRACTOR. (COORDINATE WITH GENERAL CONTRACTOR). H. PROVIDE AND INSTALL ANY ADDITIONAL HANGERS/SUPPORTS REQUIRED TO ACCOMMODATE ANY EQUIPMENT RELOCATION. PROVIDE AND INSTALL ANY ADDITIONAL HANGERS/SUPPORTS REQUIRED TO ACCOMMODATE ANY EQUIPMENT RELOCATION. I. COORDINATE ALL CEILING MOUNTED DEVICES WITH ARCHITECTURAL REFLECTED CEILING AND WORK OF ALL OTHER TRADES. COORDINATE ALL CEILING MOUNTED DEVICES WITH ARCHITECTURAL REFLECTED CEILING AND WORK OF ALL OTHER TRADES. J. ITEMS NOTED AS EXISTING TO BE REMOVED "DEMO" SHALL BE REMOVED COMPLETE. REMOVAL SHALL INCLUDE CONDUIT BOXES, HANGERS AND ITEMS NOTED AS EXISTING TO BE REMOVED "DEMO" SHALL BE REMOVED COMPLETE. REMOVAL SHALL INCLUDE CONDUIT BOXES, HANGERS AND CONDUCTORS BACK TO BRANCH PANELBOARD.

AutoCAD SHX Text

REFERENCE NOTES:

ED-201

ELECTRICAL

ONE-LINE DIAGRAM

DEMOLITION

Sheet Number:Designed By:

JOB No. 100058985

Phase:

Checked By:

Date Issued: FEBRUARY 7, 2025

PROFESSIONAL SEALS:

CLIENT:

SHEET TITLE:

ISSUE LOG

CONSULTANT:

QC Review:

SHEET INFORMATION:

PROJECT NAME:

No. Date Description

O ra ng e

Co un ty C or re ct io ns C

Fi re P um p

Sy st em R ep la ce m en t

3r d St re et

, O rla nd o

FL PE NO. 50064

SALVADOR PEREZ, P.E.

C:\Users\BAEZ6528\OneDrive\Documents\100058985 OC Pump\atkinsrealislogo.png

ARCHITECTURE, INTERIORS, CIVIL

STRUCTURAL, LANDSCAPE, MECHANICAL

PLUMBING, FIRE PROTECTION, ELECTRICAL

FIRE ALARM

ATKINS DESIGN TEAM

482 SOUTH KELLER ROAD

ORLANDO, FL 32810

TEL: +1 407 647 7275

FAX: +1 407.740.8958

www.atkinsglobal.com

100% CD

ELECTRICAL ONE-LINE DIAGRAM - DEMOLITION

NTS

AutoCAD SHX Text

600AF

AutoCAD SHX Text

500AT

AutoCAD SHX Text

600AF

AutoCAD SHX Text

500AT

AutoCAD SHX Text

400AF

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

400AF

AutoCAD SHX Text

150AT

AutoCAD SHX Text

1600AF

AutoCAD SHX Text

1400AT

AutoCAD SHX Text

1600AF

AutoCAD SHX Text

1400AT

AutoCAD SHX Text

400AF

AutoCAD SHX Text

400AT

AutoCAD SHX Text

600AF

AutoCAD SHX Text

500AT

AutoCAD SHX Text

600AF

AutoCAD SHX Text

500AT

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

CHILLER #1

AutoCAD SHX Text 30A,3P

AutoCAD SHX Text 200A,3P

AutoCAD SHX Text

UTILITY INCOMING SERVICE FEEDERS

AutoCAD SHX Text

PAD-MOUNTED UTILITY XFMR 1500KVA

AutoCAD SHX Text N

AutoCAD SHX Text E

AutoCAD SHX Text

3KVA 480-120/208V 3-PHASE,4W

AutoCAD SHX Text

FIRE PUMP CONTROLLER

AutoCAD SHX Text

JOCKEY PUMP CONTROLLER

AutoCAD SHX Text

AutoCAD SHX Text 1.5

AutoCAD SHX Text

FIRE PUMP

AutoCAD SHX Text

JOCKEY PUMP

AutoCAD SHX Text

MSB

AutoCAD SHX Text

3000A, 480/277V, 3-PHASE, 4-WIRE

AutoCAD SHX Text

GC/TS/SSA

AutoCAD SHX Text

3000A, 480/277V, 3-PHASE, 4-WIRE

AutoCAD SHX Text

DEF BLDG BOILER MCCN

AutoCAD SHX Text 1400A 3P

AutoCAD SHX Text

700KW GENERATOR #1

AutoCAD SHX Text

700KW GENERATOR #2

AutoCAD SHX Text

AUTO XFER SWITCH

AutoCAD SHX Text N

AutoCAD SHX Text

AUTO XFER SWITCH

AutoCAD SHX Text N

AutoCAD SHX Text

NORMAL MOTOR CONTROL CENTER "MCC/N"

AutoCAD SHX Text E

AutoCAD SHX Text

EHDP/C

AutoCAD SHX Text

1600A, 480/277V, 3-PHASE, 4-WIRE

AutoCAD SHX Text 400A 3P

AutoCAD SHX Text 450A 3P

AutoCAD SHX Text

EXISTING EMERGENCY DISTRIBUTION PANEL "EHDP/D"

AutoCAD SHX Text 200A 3P

AutoCAD SHX Text 400A 3P

AutoCAD SHX Text 100A 3P

AutoCAD SHX Text

BOOKING EMERGENCY SERVICE

AutoCAD SHX Text 200A 3P

AutoCAD SHX Text

EXISTING EMERGENCY DISTRIBUTION PANEL "EHDP/E"

AutoCAD SHX Text

EXISTING EMERGENCY DISTRIBUTION PANEL "GENESIS" EDP

AutoCAD SHX Text

MDP/X

AutoCAD SHX Text

1600A, 480/277V, 3-PHASE, 4-WIRE

AutoCAD SHX Text 1000A 3P

AutoCAD SHX Text 450A 3P

AutoCAD SHX Text

EXISTING SWITCHBOARD "MSB/A"

AutoCAD SHX Text 400A 3P

AutoCAD SHX Text 225A 3P

AutoCAD SHX Text 100A 3P

AutoCAD SHX Text

EXISTING DISTRIBUTION MCC-E

AutoCAD SHX Text

EXISTING EMERGENCY DISTRIBUTION PANEL "EQHDP/D"

AutoCAD SHX Text

EMERGENCY DISTRIBUTION "MDP/E"

AutoCAD SHX Text

EXISTING CORRECTIONS SUPPORT ATS

AutoCAD SHX Text 225A 3P

AutoCAD SHX Text 70A 2P

AutoCAD SHX Text

EXIST. UPS PANEL

AutoCAD SHX Text

DEF BLDG BOILER MCCN

AutoCAD SHX Text

DEF BLDG BOILER MCCN

AutoCAD SHX Text

(EXISTING)

AutoCAD SHX Text

(EXISTING)

AutoCAD SHX Text

(EXISTING)

AutoCAD SHX Text

(EXISTING)

AutoCAD SHX Text 1600A 3P

AutoCAD SHX Text

AutoCAD SHX Text CONTRACTOR TO DE-ENERGIZE, DISCONNECT AND REMOVE EXISTING NORMAL POWER CONDUCTORS AND CONDUITS. CONTRACTOR TO DE-ENERGIZE, DISCONNECT AND REMOVE EXISTING FIRE PUMP SERVICE DISCONNECT. CONTRACTOR TO DE-ENERGIZE, DISCONNECT AND REMOVE EXISTING JOCKEY PUMP SERVICE DISCONNECT TO BE REPLACED WITH NEW SERVICE DISCONNECT EQUIPMENT. EXISTING JOCKEY PUMP FEEDERS AND STEP DOWN TRANSFORMER TO REMAIN. EXISTING JOCKEY PUMP FEEDERS, CONDUITS, CONTROLLER AND PUMP TO REMAIN. CONTRACTOR TO DE-ENERGIZE, DISCONNECT AND REMOVE EMERGENCY POWER FEEDERS FROM FIRE PUMP ATS TO DISTRIBUTION PANEL "EHDP/C" 200A,3P FEEDER BREAKER. CONTRACTOR TO DISCONNECT AND REMOVE FIRE PUMP AUTOMATIC TRANSFER SWITCH AND RETURN EQUIPMENT TO OWNER AS REQUIRED. REMOVE EXISTING CONDUCTORS AND CONDUITS ON IT'S ENTIRETY BACK TO SOURCE. CONTRACTOR TO DISCONNECT AND REMOVE FIRE PUMP CONTROLLER AND RETURN EQUIPMENT TO OWNER AS REQUIRED. REMOVE EXISTING CONDUCTORS AND REMOVE EXISTING CONDUCTORS AND CONDUITS ON IT'S ENTIRETY BACK TO SOURCE. EXISTING FIRE PUMP TO BE REPLACE WITH NEW. CONTRACTOR TO DISCONNECT . CONTRACTOR TO DISCONNECT AND REMOVE EXISTING FIRE PUMP AND RETURN EQUIPMENT TO OWNER AS REQUIRED.

AutoCAD SHX Text

REFERENCE NOTES:

AutoCAD SHX Text

GENERAL DEMOLITION NOTES:

AutoCAD SHX Text A. THE CONTRACTOR SHALL VISIT AND CAREFULLY EXAMINE THOSE PORTIONS OF THE BUILDING AND THE CONTRACTOR SHALL VISIT AND CAREFULLY EXAMINE THOSE PORTIONS OF THE BUILDING AND SITE AFFECTED BY THIS WORK BEFORE SUBMITTING PROPOSAL SO AS TO BECOME FAMILIAR WITH EXISTING WORK. SUBMISSION OF A PROPOSAL WILL BE CONSTRUED AS EVIDENCE. THAT SUCH EXAMINATION HAS BEEN MADE AND LATER CLAIMS FOR LABOR, EQUIPMENT OR MATERIALS REQUIRED BECAUSE BY DIFFICULTIES ENCOUNTERED WILL NOT BE RECOGNIZED. IT IS TO BE UNDERSTOOD THAT UNFORESEEN CONDITIONS PROBABLY EXIST AND NEW WORK MAY NOT BE FIELD LOCATED EXACTLY AS SHOWN ON THE DRAWINGS. COOPERATION WITH OTHER TRADES IN EQUIPMENT ROUTING AS DETERMINED DURING CONSTRUCTION AND AS DIRECTED BY THE ARCHITECT/ENGINEER MAY BE NECESSARY AND IT IS INTENDED THAT SUCH DEVIATIONS SHALL BE CONSIDERED AS PART OF THIS CONTRACT. IT IS ALSO UNDERSTOOD THAT THE PLANS ARE NOT COMPLETELY TO SCALE. THIS CONTRACTOR IS TO FIELD VERIFY DIMENSIONS OF ALL EXISTING CONDITIONS, PRIOR TO BID AND INCLUDE ANY DEVIATIONS IN THE CONTRACT. B. ALL DEVICES AND EQUIPMENT NOT SHOWN AND IN AREAS OUTSIDE OF CONSTRUCTION AREA ALL DEVICES AND EQUIPMENT NOT SHOWN AND IN AREAS OUTSIDE OF CONSTRUCTION AREA SHALL REMAIN ACTIVE UNLESS OTHERWISE NOTED. INSTALL AS REQUIRED TO MAINTAIN CONTINUITY TO EXISTING DEVICES AND EQUIPMENT THAT REMAIN. C. ALL BRANCH CIRCUIT WIRING SHALL BE CONCEALED UNLESS OTHERWISE NOTED. ALL BRANCH CIRCUIT WIRING SHALL BE CONCEALED UNLESS OTHERWISE NOTED. D. ALL EQUIPMENT AND MATERIAL REMOVED AND NOT REUSED SHALL BE TURNED OVER TO THE ALL EQUIPMENT AND MATERIAL REMOVED AND NOT REUSED SHALL BE TURNED OVER TO THE OWNER OR AT THE OWNERS REQUEST DISPOSED OF BY THE CONTRACTOR. E. ALL ELECTRICAL DEVICES THAT ARE REMOVED SHALL BE REMOVED AS DIRECTED BY THE OWNER, ALL ELECTRICAL DEVICES THAT ARE REMOVED SHALL BE REMOVED AS DIRECTED BY THE OWNER, AND CEILING OR WALL SHALL BE PATCHED TO MATCH EXISTING OR NEW FINISH. ALL PATCHES OR CEILING PLATES SHALL BE PATCHED OR PAINTED AS DIRECTED BY ARCHITECT. F. ALL EXISTING ELECTRICAL EQUIPMENT IS NOT SHOWN. IT IS THE CONTRACTORS RESPONSIBILITY ALL EXISTING ELECTRICAL EQUIPMENT IS NOT SHOWN. IT IS THE CONTRACTORS RESPONSIBILITY TO BECOME FAMILIAR WITH ALL EXISTING CONDITIONS PRIOR TO BID, AND INCLUDE IN HIS BID THE REMOVAL OF ALL EQUIPMENT, CONDUIT, WIRE, ETC. THAT IS NOT BEING REUSED BACK TO ITS SOURCE. G. ALL CONCRETE, WALL PATCHING, CEILING REPAIR, AND OTHER GENERAL WORK REQUIRED FOR ALL CONCRETE, WALL PATCHING, CEILING REPAIR, AND OTHER GENERAL WORK REQUIRED FOR INSTALLING THE ELECTRICAL SYSTEMS AND TO REPAIR TO "LIKE NEW CONDITION" TO BE PROVIDED AND INSTALLED BY CONTRACTOR. (COORDINATE WITH GENERAL CONTRACTOR). H. PROVIDE AND INSTALL ANY ADDITIONAL HANGERS/SUPPORTS REQUIRED TO PROVIDE AND INSTALL ANY ADDITIONAL HANGERS/SUPPORTS REQUIRED TO ACCOMMODATE ANY EQUIPMENT RELOCATION. I. COORDINATE ALL CEILING MOUNTED DEVICES WITH ARCHITECTURAL REFLECTED COORDINATE ALL CEILING MOUNTED DEVICES WITH ARCHITECTURAL REFLECTED CEILING AND WORK OF ALL OTHER TRADES. J. ITEMS NOTED AS EXISTING TO BE REMOVED "DEMO" SHALL BE REMOVED ITEMS NOTED AS EXISTING TO BE REMOVED "DEMO" SHALL BE REMOVED COMPLETE. REMOVAL SHALL INCLUDE CONDUIT BOXES, HANGERS AND CONDUCTORS BACK TO BRANCH PANELBOARD.

AutoCAD SHX Text

E-102

CEP BUILDING

ELECTRICAL

NEW WORK

Sheet Number:Designed By:

JOB No. 100058985

Phase:

Checked By:

Date Issued: FEBRUARY 7, 2025

PROFESSIONAL SEALS:

CLIENT:

SHEET TITLE:

ISSUE LOG

CONSULTANT:

QC Review:

SHEET INFORMATION:

PROJECT NAME:

No. Date Description

O ra ng e

Co un ty C or re ct io ns C

Fi re P um p

Sy st em R ep la ce m en t

3r d St re et

, O rla nd o

FL PE NO. 50064

SALVADOR PEREZ, P.E.

C:\Users\BAEZ6528\OneDrive\Documents\100058985 OC Pump\atkinsrealislogo.png

ARCHITECTURE, INTERIORS, CIVIL

STRUCTURAL, LANDSCAPE, MECHANICAL

PLUMBING, FIRE PROTECTION, ELECTRICAL

FIRE ALARM

ATKINS DESIGN TEAM

482 SOUTH KELLER ROAD

ORLANDO, FL 32810

TEL: +1 407 647 7275

FAX: +1 407.740.8958

www.atkinsglobal.com

100% CD

CEP BUILDING UPPER PLAN - NEW WORK

3/16" = 1'-0"

AutoCAD SHX Text T

AutoCAD SHX Text

EXISTING "MSBA"

AutoCAD SHX Text

EXISTING "MCC/E"

AutoCAD SHX Text

EXISTING "MCC/N"

AutoCAD SHX Text

EXISTING "MDP/E"

AutoCAD SHX Text

EXISTING "MDP/X"

AutoCAD SHX Text

EXISTING "MSB"

AutoCAD SHX Text

EXISTING PAD MOUNT UTILITY TRANSFORMER #2

AutoCAD SHX Text

EXISTING PAD MOUNT UTILITY TRANSFORMER #1

AutoCAD SHX Text

EXISTING UTILITY METERS

AutoCAD SHX Text

EXISTING "EHDP/C"

AutoCAD SHX Text

EXISTING GC/TS/SSA

AutoCAD SHX Text

EXTERIOR RECEIVING YARD

AutoCAD SHX Text

EXISTING CHILLER YARD

AutoCAD SHX Text

AutoCAD SHX Text FIRE ALARM DEVICES WHERE REQUIRED SHALL BE INSTALLED IN COMPLIANCE WITH 2021 NFPA AND FLORIDA FIRE PREVENTION CODE. CONTRACTOR SHALL VERIFY ALL DIMENSIONS AND EXISTING CONDITIONS AT THE JOB SITE BEFORE COMMENCING ANY PHASE OF THE WORK. NOTIFY ENGINEER OF ANY CONFLICTS, DISCREPANCIES OR OMISSIONS PRIOR TO COMMENCEMENT OF THE CONTRACT WORK. THIS PROJECT IS IN COMPLIANCE WITH 2020 NEC 210.19 WITH REGARDS TO VOLTAGE DROP OF 5%. SEAL ALL FIRE WALLS, ROOF, AND FLOOR PENETRATIONS WITH UL LISTED FIRE SEALANT.

AutoCAD SHX Text

1. 2. 3. 4.

AutoCAD SHX Text

GENERAL NOTES:

AutoCAD SHX Text

REFERENCE NOTES:

AutoCAD SHX Text PROVIDE NEW 30AMP 480/277V, 3 , 4W, NEMA 1 FUSED DISCONNECT WITH 15AMPS, 100KAIC RATED FUSES. PROVIDE PERMANENT LABEL. CONNECT VIA NEW 30AMPS, 3-POLE CIRCUIT BREAKER FROM EXISTING PANEL "EHDP/C". REFER TO DRAWING E-201 FOR CONDUCTORS AND CONDUIT DETAILS. EXISTING 480/277V-208V, 3KVA PAD MOUNTED TRANSFORMER TO REMAIN. PROVIDE 30 AMP 208/120V, 3 , 4W, NEMA 1 FUSED DISCONNECT WITH 15AMPS, 100KAIC RATED FUSES. PROVIDE PERMANENT LABEL. RE-CONNECT EXISTING STEP DOWN TRANSFORMER AND JOCKEY PUMP CONDUCTORS AND CONDUITS. 480/277V, 3PH, 4W 150KW DIESEL GENERATOR WITH WEATHERPROOF HOUSING, CRITICAL SILENCER WITH ALARMS. PROVIDE INTEGRAL MAGNETIC CIRCUIT BREAKER AS INDICATED. PROVIDE CORROSION RESISTANCE LEVEL 1 ENCLOSURE WITH 72 HOURS RUN TIME BASE MOUNT TANK. INSTALL IN ACCORDANCE WITH NFPA 110. PROVIDE EMERGENCY STOP BUTTON ON EXTERIOR OF ENCLOSURE. REFER TO DRAWING E-301 FOR GENERATOR SPECIFICATIONS AND DETAILS. UNDERGROUND 480/277V, 3 , 4W ELECTRICAL FEEDER FROM NEW DIESEL FUEL GENERATOR WITHBASE MOUNT TANK TO FIRETROL FIRE PUMP CONTROLLER WITH INTEGRAL POWER TRANSFER SWITCH LOCATED AT CEP BUILDING FIRE PUMP ROOM #107. SEE ONE-LINE ELECTRICAL RISER DIAGRAM DRAWING SHEET E-201 FOR DETAILS. FIELD COORDINATE ROUTING AND TERMINATION POINT PRIOR TO BIDDING. CONTRACTOR TO FIELD COORDINATE INSTALLATION OF NEW FIRE PUMP FEEDERS FROM NEW PAD MOUNT DIESEL GENERATOR THROUGH WALL OF FIRE PUMP ROOM. CONTRACTOR TO COORDINATE CONDUIT TRANSITION THROUGH CEP BUILDING WALL VIA SCHEDULE 80 PVC U.G. CONDUIT UP EXTERIOR WALL TO 2" GRS CONDUIT CONDUIT WHERE EXPOSED. UNDERGROUND 480/277V, 3 , 4W ELECTRICAL FEEDER FROM EXISTING UTILITY PAD MOUNTEDTRANSFORMER TO FIRETROL FIRE PUMP CONTROLLER WITH INTEGRAL POWER TRANSFER SWITCH LOCATED AT CEP BUILDING FIRE PUMP ROOM #107. SEE ONE-LINE ELECTRICAL RISER DIAGRAM DRAWING SHEET E-201 FOR DETAILS. FIELD COORDINATE ROUTING AND TERMINATION POINT PRIOR TO BIDDING.

AutoCAD SHX Text

E-201

ELECTRICAL

ONE-LINE DIAGRAM

NEW WORK

Sheet Number:Designed By:

JOB No. 100058985

Phase:

Checked By:

Date Issued: FEBRUARY 7, 2025

PROFESSIONAL SEALS:

CLIENT:

SHEET TITLE:

ISSUE LOG

CONSULTANT:

QC Review:

SHEET INFORMATION:

PROJECT NAME:

No. Date Description

O ra ng e

Co un ty C or re ct io ns C

Fi re P um p

Sy st em R ep la ce m en t

3r d St re et

, O rla nd o

FL PE NO. 50064

SALVADOR PEREZ, P.E.

C:\Users\BAEZ6528\OneDrive\Documents\100058985 OC Pump\atkinsrealislogo.png

ARCHITECTURE, INTERIORS, CIVIL

STRUCTURAL, LANDSCAPE, MECHANICAL

PLUMBING, FIRE PROTECTION, ELECTRICAL

FIRE ALARM

ATKINS DESIGN TEAM

482 SOUTH KELLER ROAD

ORLANDO, FL 32810

TEL: +1 407 647 7275

FAX: +1 407.740.8958

www.atkinsglobal.com

100% CD

ELECTRICAL ONE-LINE DIAGRAM - NEW WORK

NTS

AutoCAD SHX Text

EXISTING UTILITY PAD MOUNT 1500KVA TRANSFORMER AND UTILITY METER TO REMAIN

AutoCAD SHX Text CONNECT TO EXISTING BUILDING GROUND ELECTRODE THREE POINT GROUND FIELD, METALLIC WATER PIPE, CONCRETE ENCASED ELECTRODE AND BLDG STEEL

AutoCAD SHX Text

GROUND FLOOR

AutoCAD SHX Text %%U225

AutoCAD SHX Text

#1 AWG CU

AutoCAD SHX Text 480/277V, 3PH, 4W, NEMA 3R, 150KW DIESEL FUEL EMERGENCY GENERATOR WITH BASE MOUNT TANK

AutoCAD SHX Text

EXISTING CONCRETE PAD

AutoCAD SHX Text (2)1" CONDUIT WITH (10) #12 AWG CU + GENERATOR BELDEN CABLE FOR START CIRCUIT, AND GENERATOR ANNUNCIATOR.

AutoCAD SHX Text

(4)#3/0 AWG CU, (1)#6 AWG CU GROUND IN 2"C.

AutoCAD SHX Text

FINISHED GRADE

AutoCAD SHX Text 200'-0"+/-(V/D=1.26%%%)

AutoCAD SHX Text

BASE MOUNT FUEL TANK

AutoCAD SHX Text WEATHER PROOF GENERATOR REMOTE STOP PUSH BUTTON, BREAK GLASS TYPE. COORDINATE LOCATION WITH AHJ.

AutoCAD SHX Text 30A,3P

AutoCAD SHX Text

3KVA 480-120/208V 3-PHASE,4W

AutoCAD SHX Text

EXISTING JOCKEY PUMP CONTROLLER TO REMAIN

AutoCAD SHX Text

EXISTING JOCKEY PUMP TO REMAIN

AutoCAD SHX Text

1.5 HP

AutoCAD SHX Text M

AutoCAD SHX Text

EXTERIOR

AutoCAD SHX Text

ROOM #107

AutoCAD SHX Text

ROOM #107

AutoCAD SHX Text

(3)#12 AWG CU, (1)#12 AWG CU GROUND IN EXISTING CONDUIT

AutoCAD SHX Text

EXISTING TRANSFORMER TO REMAIN

AutoCAD SHX Text

ROOM #202

AutoCAD SHX Text

AutoCAD SHX Text 5/8"x20' CU CLAD GRND ROD, BOND FRAME ONLY

AutoCAD SHX Text MAGNETIC ONLY CIRCUIT BREAKER AND SHALL BE LOCKABLE IN THE CLOSED POSITION PER NEC 695.4(B)(3)

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text

ELC-22

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text

ELC-24

AutoCAD SHX Text

PROVIDE BELDEN CONTROL CABLES IN 1" CONDUIT

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text

GENERATOR ANNUNCIATOR LOCATED IN FIRE PUMP ROOM

AutoCAD SHX Text

(EXISTING)

AutoCAD SHX Text

(EXISTING)

AutoCAD SHX Text

(EXISTING)

AutoCAD SHX Text

PROVIDE 72 HOUR FUEL TANK AT 100% LOAD AND LEVEL 1 ACOUSTIC ENCLOSURE

AutoCAD SHX Text

(3)#12 AWG CU, (1)#12 AWG CU GROUND IN 3/4"C.

AutoCAD SHX Text

75 HP

AutoCAD SHX Text M

AutoCAD SHX Text

FIRE PUMP CONTROLLER WITH INTEGRAL ATS & SERVICE DISCONNECT 75 H.P.

AutoCAD SHX Text

BOND

AutoCAD SHX Text %%U225

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text

(3)#3/0 AWG CU, (1)#6 AWG CU GROUND IN 2"C.

AutoCAD SHX Text

(4)250 KCMIL CU, IN 2-1/2"C.

AutoCAD SHX Text

(3)#12 AWG CU, (1)#12 AWG CU GROUND IN 3/4"C.

AutoCAD SHX Text 30A,3P

AutoCAD SHX Text

(3)#12 AWG CU, (1)#12 AWG CU GROUND IN 3/4"C.

AutoCAD SHX Text

(3)#12 AWG CU, (1)#12 AWG CU GROUND IN EXISTING CONDUIT

AutoCAD SHX Text

(3)#12 AWG CU, (1)#12 AWG CU GROUND IN 3/4" CONDUIT

AutoCAD SHX Text LOCATION OF EXISTING UTILITY PAD MOUNTED TRANSFORMER ON EXISTING CONCRETE HOUSEKEEPING PAD. ORLANDO UTILITY COMMISSION (OUC) CONTACT: MICHAEL STINGLE @ 407-496-2538. MSTINGLE@OUC.COM. FIELD VERIFY EXISTING CONDITIONS PRIOR TO BIDDING. SECONDARY VOLTAGE 480/277V, 3 , 4W AS NOTED. PROVIDE 30 AMP 480/277V, 3 , 4W, NEMA 1 FUSED DISCONNECT WITH 15AMP 100KAIC RATED FUSES. PROVIDE PERMANENT LABEL. PROVIDE 30 AMP 208/120V, 3 , 4W, NEMA 1 FUSED DISCONNECT WITH 15AMP 100KAIC RATED FUSES. PROVIDE PERMANENT LABEL. FLOOR MOUNT SERVICE ENTRANCE RATED FIRETROL FIRE PUMP CONTROLLER WITH INTEGRAL AUTOMATIC POWER TRANSFER SWITCH AND MAIN CIRCUIT BREAKER - 480/277V, 3 , 4W 42KAIC.,NEMA 2 RATED ENCLOSURE. REFER TO DRAWING E-302 FOR FIRE PUMP CONTROLLER REFER TO DRAWING E-302 FOR FIRE PUMP CONTROLLER SPECIFICATIONS. 480/277V, 3PH, 4W 150KW DIESEL GENERATOR WITH WEATHERPROOF HOUSING, CRITICAL SILENCER WITH ALARMS. PROVIDE INTEGRAL MAGNETIC CIRCUIT BREAKER AS INDICATED. PROVIDE CORROSION RESISTANCE LEVEL 1 ENCLOSURE WITH 72 HOURS RUN TIME BASE MOUNT TANK. INSTALL IN ACCORDANCE WITH NFPA 110. PROVIDE EMERGENCY STOP BUTTON ON EXTERIOR OF ENCLOSURE. REFER TO DRAWING E-301 FOR GENERATOR SPECIFICATIONS AND DETAILS. UNDERGROUND 480/277V, 3 , 4W ELECTRICAL FEEDER FROM NEW DIESEL FUEL GENERATOR WITHBASE MOUNT TANK TO FIRETROL FIRE PUMP CONTROLLER WITH INTEGRAL POWER TRANSFER SWITCH LOCATED AT CEP BUILDING FIRE PUMP ROOM #107. SEE ONE-LINE ELECTRICAL RISER DIAGRAM DRAWING SHEET E-201 FOR DETAILS. FIELD COORDINATE ROUTING AND TERMINATION POINT PRIOR TO BIDDING. RECONNECT FIRE PUMP CONTROLLER, VALVES, FLOW SWITCHES AND MONITORING MODULES FROM FIRE PUMP CONTROLLER, VALVES, FLOW SWITCHES AND MONITORING MODULES FROM THE FIRE ALARM SYSTEM TO NEW FIRE PUMP CONTROLLER. NEW FRE PUMP SHALL BE MONITORED BY EXISTING FACP PANEL. PROVIDE REPROGRAMMING AS REQUIRED. EXISTING JOCKEY PUMP TO REMAIN AND SHALL BE RE-CONNECTED TO EXISTING RELOCATED JOCKEY PUMP CONTROLLER AT THE NEW PROPOSED LOCATION AS SHOWN ON DRAWING E-101.

AutoCAD SHX Text

1. 2. 3. 4.

AutoCAD SHX Text

GENERAL NOTES:

AutoCAD SHX Text

REFERENCE NOTES:

AutoCAD SHX Text

E-302

FIRETROL FIRE PUMP

CONTROLLER AND

SPECIFICATIONS

Sheet Number:Designed By:

JOB No. 100058985

Phase:

Checked By:

Date Issued: FEBRUARY 7, 2025

PROFESSIONAL SEALS:

CLIENT:

SHEET TITLE:

ISSUE LOG

CONSULTANT:

QC Review:

SHEET INFORMATION:

PROJECT NAME:

No. Date Description

O ra ng e

Co un ty C or re ct io ns C

Fi re P um p

Sy st em R ep la ce m en t

3r d St re et

, O rla nd o

FL PE NO. 50064

SALVADOR PEREZ, P.E.

C:\Users\BAEZ6528\OneDrive\Documents\100058985 OC Pump\atkinsrealislogo.png

ARCHITECTURE, INTERIORS, CIVIL

STRUCTURAL, LANDSCAPE, MECHANICAL

PLUMBING, FIRE PROTECTION, ELECTRICAL

FIRE ALARM

ATKINS DESIGN TEAM

482 SOUTH KELLER ROAD

ORLANDO, FL 32810

TEL: +1 407 647 7275

FAX: +1 407.740.8958

www.atkinsglobal.com

100% CD

E-401

PANEL SCHEDULES

Sheet Number:Designed By:

JOB No. 100058985

Phase:

Checked By:

Date Issued: FEBRUARY 7, 2025

PROFESSIONAL SEALS:

CLIENT:

SHEET TITLE:

ISSUE LOG

CONSULTANT:

QC Review:

SHEET INFORMATION:

PROJECT NAME:

No. Date Description

O ra ng e

Co un ty C or re ct io ns C

Fi re P um p

Sy st em R ep la ce m en t

3r d St re et

, O rla nd o

FL PE NO. 50064

SALVADOR PEREZ, P.E.

C:\Users\BAEZ6528\OneDrive\Documents\100058985 OC Pump\atkinsrealislogo.png

ARCHITECTURE, INTERIORS, CIVIL

STRUCTURAL, LANDSCAPE, MECHANICAL

PLUMBING, FIRE PROTECTION, ELECTRICAL

FIRE ALARM

ATKINS DESIGN TEAM

482 SOUTH KELLER ROAD

ORLANDO, FL 32810

TEL: +1 407 647 7275

FAX: +1 407.740.8958

www.atkinsglobal.com

100% CD

GENERAL NOTES61G15-32.004 DESIGN OF WATER BASED FIRE PROTECTION SYSTEMS

SCOPE NOTES

FIRE PROTECTION DATA

FIRE PROTECTION SYSTEM TO COMPLY WITH THE REFERENCED NFPA STANDARDS, AND THE FLORIDA

FIRE PREVENTION CODE 8TH EDITION.

FINAL INSPECTION AND APPROVAL BY THE AUTHORITY HAVING JURISDICTION.

THE CONTRACTOR'S LAYOUT (SHOP DRAWINGS), AND MATERIAL DATA SHALL BE

SUBMITTED TO THE ARCHITECT/ENGINEER AND FIRE MARSHAL AND SHALL BE

APPROVED PRIOR TO ANY INSTALLATION.

PIPE ROUTING SHOWN IS SCHEMATIC ONLY. IT IS THE RESPONSIBILITY OF THIS CONTRACTOR

TO PROVIDE ANY ADDITIONAL OFFSETS REQUIRED FOR PROPER INSTALLATION AND

COORDINATION WITH OTHER TRADES.

ALL GROOVED FITTINGS AND COUPLINGS SHALL BE SUPPLIED BY A SINGLE MANUFACTURER.

1. WATER BASED FIRE PROTECTION SYSTEMS INCLUDE, BUT ARE NOT LIMITED TO. AUTOMATIC SPRINKLER SYSTEM

OF WET, DRY, FINE WATER SPRAY (MIST). MANUAL, AND DELUGE VALVE CONTROLLED TYPES, PUMPING SYSTEMS, STANDPIPES, FIRE WATER MAINS AND DEDICATED FIRE PROTECTION WATER SOURCES.

2. TO ENSURE MINIMUM DESIGN QUALITY IN FIRE PROTECTION SYSTEMS ENGINEERING DOCUMENTS, SAID DOCUMENTS

SHALL INCLUDE AS A MINIMUM THE FOLLOWING INFORMATION WHEN APPLICABLE.

(A) THE POINT OF SERVICE FOR THE FIRE PROTECTION WATER SUPPLY AS DEFINED BY SECTION 633.021(18), F.S. -

REFER TO THE SITE PLANS ON SHEETS F-002, F-003, AND F-004.

(B) APPLICABLE NFPA STANDARD TO BE APPLIED, OR IN THE CASE WHERE NO SUCH STANDARD EXISTS, THE

ENGINEERING STUDY, JUDGEMENTS, AND/OR PERFORMANCE BASED ANALYSIS AND CONCLUSIONS.

NFPA 20

NOT APPLICABLE TO THIS PROJECT.

(D) DESIGN APPROACH, WHICH INCLUDES SYSTEM TYPE, DENSITIES, DEVICE TEMPERATURE RATING, AND SPACING

FOR EACH SEPARATE HAZARD OCCUPANCY.

(E) CHARACTERISTICS OF WATER SUPPLY TO BE USED, SUCH AS MAIN SIZE AND LOCATION, WHETHER IT IS

DEAD-END OR CIRCULATING; AND IF DEAD-END. THE DISTANCE TO THE NEAREST CIRCULATION MAIN. AS WELL AS

ITS MINIMUM DURATION AND RELIABILITY FOR THE MOST HYDRAULICALLY DEMANDING DESIGN AREA.

REFER TO WATER SUPPLY NOTES ON THIS SHEET.

(F) WHEN PRIVATE OR PUBLIC WATER SUPPLIES ARE USED, THE FLOW TEST DATA, INCLUDING THE DATE AND TIME

OF TEST. WHO CONDUCTED TEST OR SUPPLIED INFORMATION. TEST ELEVATION, STATIC GAUGE PRESSURE AT NO

FLOW, FLOW RATE WITH RESIDUAL GAUGE PRESSURE. HYDRANT BUTT COEFFICIENT, AND LOCATION OF THE TEST IN

RELATION TO THE HYDRAULIC POINT OF SERVICE.

REFER TO FLOW TEST INFORMATION ON THIS SHEET.

(G) VALVING AND ALARM REQUIREMENTS TO MINIMIZE POTENTIAL FOR IMPAIRMENTS AND UNRECOGNIZED FLOW

OF WATER.

(H) MICROBIAL INDUCED CORROSION (MIC). THE ENGINEER OF RECORD SHALL MAKE REASONABLE EFFORTS TO

IDENTIFY WATER SUPPLIES THAT COULD LEAD TO MICROBIAL INDUCED CORROSION (MIC). SYCH EFFORTS MAY

CONSIST OF DISCUSSIONS WITH THE LOCAL WATER PURVEYOR AND/OR FIRE OFFICIAL. FAMILIARITY WITH CONDITIONS

IN THE LOCAL AREA, OR LABORATORY TESTING OF WATER SUPPLIES. WHEN CONDITIONS ARE FOUND THAT MAY

RESULT IN MIC CONTAMINATION OF THE FIRE PROTECTION PIPING. THE ENGINEER SHALL DESIGN CORRECTIVE

MEASURES. REFER TO WATER SUPPLY NOTES ON THIS SHEET.

(I) BACKFLOW PREVENTION AND METERING SPECIFICATIONS AND DETAILS TO MEET LOCAL WATER PURVEYOR

REQUIREMENT INCLUDING MAXIMUM ALLOWABLE PRESSURE DROP. THESE ITEMS ARE EXISTING AND OUTSIDE THE

CAMPUS WATER SUPPLY IS PROTECTED WITH EXISTING BACKFLOW PREVENTERS.

(J) QUALITY AND PERFORMANCE SPECIFICATIONS OF ALL YARD AND INTERIOR FIRE PROTECTION COMPONENTS.

NOT APPLICABLE TO THIS PROJECT.

(K) FOR HIGH HAZARD OCCUPANCY CLASSIFICATIONS, STORAGE OCCUPANCIES, AND FACTORY OCCUPANCIES, AS

DEFINED I SECTIONS 307, 311, AND 306. RESPECTIVELY, OF THE FLORIDA BUILDING CODE, BUILDING, AND HIGH-

RISE BUILDINGS, AS DEFINED IN SECTION 202 OF THE FLORIDA BUILDING CODE. BUILDING, A DETERMINATION OF

WHETHER A FIRE PUMP IS REQUIRED AND IF SO, THE SPECIFIC VOLUMETRIC FLOW AND PRESSURE RATING OF THE

PUMP. THE FLORIDA BUILDING CODE IS INCORPORATED BY REFERENCE IN SUBSECTION 61G15-18.011(6), F.A.C.,

(L) A VERIFICATION OF WHETHER A FIREWATER STORAGE TANK IS REQUIRED ON SITE AND IF SO, A DETERMINATION

OF THE SIZE AND CAPACITY REQUIRED.

(M) OWNER'S CERTIFICATE. IN STORAGE OCCUPANCIES, THE OWNER'S INFORMATION CERTIFICATE IS REQUIRED FROM

THE PROPERTY OWNER AS IT CLEARLY DEFINES THE STORAGE CONFIGURATION OF THE SPACE FOR THE CURRENT

AND FUTURE USE OF THE PROPERTY. AS REQUIRED BY THE CODES AND STANDARDS SET FORTH IN SUBSECTION

61G15-32.002(7), F.A.C.

NOT APPLICABLE TO THIS PROJECT.

ALL EXISTING CONTROL VALVES SHALL HAVE TAMPER SWITCHES AND6.

MONITORED BY THE FIRE ALARM SYSTEM.

SEE GENERAL NOTES ON THIS SHEET.

REFER TO WATER SUPPLY NOTES ON THIS SHEET.

NOT APPLICABLE TO THIS PROJECT, BUT A FIRE PUMP IS IN THE SCOPE OF THIS PROJECT DUE TO STANDPIPE REQUIREMENTS.

NOT APPLICABLE TO THIS PROJECT.

REMOVE THE EXISTING FIRE PUMP

INSTALL NEW FIRE PUMP. SAME SIZE, MODEL, MANUFACTURER AS EXISTING.

REMOVE EXISTING FIRE PUMP CONTROLLER.

INSTALL NEW FIRETROL DIGITAL SOFT START CONTROLLER WITH TRANSFER SWITCH.

EQUIVALENT FIRE PUMPS WILL BE CONSIDERED. CONTRACTOR SHALL MODIFY PIPING,

VALVES, BASE PAD AS REQUIRED FOR INSTALLATION OF THE PUMP.

EQUIVALENT FIRE PUMP CONTROLLERS WILL BE CONSIDERED. CONTRACTOR SHALL MODIFY

ROOM CONSTRAINTS AS REQUIRED TO INSTALL THE CONTROLLER.

PUMP MANUFACTURER MODEL NO. GPM HEAD (FT.)

ELECTRICAL REQUIREMENTS

H.P. VOLTAGE

REMARKS

R.P.M.

FP-1 ALLIS CHAMLERS 8X8X17F 1500 60 PSI 75 480 V, 3 PHASE1750 1

1 NEW DIGITAL SOFT START CONTROLLER WITH TRANSFER SWITCH.

DESIGN CRITERIA:

FLOW TEST:

FLOW TEST INFORMATION:

DESIGN OF THE FIRE SUPPRESSION SYSTEM ON THIS PROJECT.

THE FOLLOWING PUBLICATIONS SHALL BE USED AS A REFERENCE FOR

WATER SUPPLY NOTES:

MICROBIAL INDUCED CORROSION (MIC) HAS NOT BEEN DETECTED IN THE WATER SUPPLY.1.

2. THE EXISTING WATER SUPPLY IS A 12" MAIN SUPPLIED FROM A CONNECTION ON JOHN YOUNG

PARKWAY AND ANOTHER CONNECTION ON 33RD STREET. THE SYSTEM IS A LOOPED SYSTEM.

PERFORMED BY:

DATE:

STATIC:

EXISTING SPRINKLER SYSTEM WITHIN THE ROOM TO REMAIN.7.

1. NFPA 20 - 2019 EDITION - STANDARD FOR THE INSTALLATION OF STATIONARY FIRE PUMPS FOR FIRE PROTECTION

2. FLORIDA FIRE PREVENTION CODE, 8TH EDITION

FLOW:

FLOW PRESSURE:

LOCATION:

NATIONAL FIRE PROTECTION

06-21-2022

62 PSI

1600 GPM

HYDRANT ON VISION BOULEVARD WITHIN JAIL COMPLEX

REPLACE EXISTING REMOTE ALARM PANEL WITH A NEW PANEL. COORDINATE WITH MAINTENANCE

PERSONNEL. EXISTING PANEL IS LOCATED IN BUILDING "A" CONTROL ROOM. RE-USE EXISTING CONDUIT.

HEAVY DUTY METER BOX

INSTALL BALL DRIP IN

WITH GRADE

CONCRETE PAD, FLUSH

POUR 18" X 18" X 6"

6" DEPTH OF 3/4" CRUSHED STONE

2 1/2" X 2 1/2" X 6" F.D.C.(U.L./F.M.)

WITH ROUGH CHROME PLATED

BODY AND POLISHED CHROME TRIM

GRADE

THRUST BLOCK

"AUTO. SPKR"

ESCUTCHEON LETTERING

BALL-DRIP

FIRE PUMP SCHEDULE

REMOTE FIRE DEPT. CONNECTION

No Scale 2BOLLARD DETAIL

No Scale 1

FP-1

DEMO EXISTING

PIPING TO FDC

EXISTING PIPING

NEW FIRE PUMP

CONTROLLER

WITH TRANSFER

SWITCH

CLEAR THE EXISTING

FENCE AND TURN PLAN

SOUTH

CLEAR THE EXISTING GATE AND

INSTALL NEW REMOTE FDC

INSTALL NEW

CHECK VALVE

CLEAR EXISTING CONDUITS

AND TURN DOWN TO

UNDERGROUND

6"ø

RELOCATE EXISTING FDC SIGN

MOVE TO NEW FDC LOCATION

REMOVE EXISTING FDC

INSTALL EXISTING FDC

SIGN ON FENCE

NOTE:

CONTRACTOR WILL USE GROUND

PENETRATING RADAR (GPR) AND

LOCATE ALL EXISTING UTILITIES IN

THE IMMEDIATE AREA OF THE REMOTE

FDC PIPE. COORDINATE THE NEW PIPE

INSTALL WITH THE EXISTING.

PATCH AND REPAIR THE PIPE OPENING TO MATCH

THE EXISTING WALL CONDITIONS. ENSURE THE PATCHED

AREA IS FLUSH WITH THE SURROUNDING SURFACE AND

WATERPROOF, USING CONSISTENT MATERIALS (e.g. PLASTER, MASONRY, ETC.) APPLY FINISHING TECHNIQUES FOR SEAMLESS

INTEGRATION, INCLUDING SANDING, PRIMING, AND PAINTING,

PAINT TO MATCH EXISTING.

3' - 0"

INSTALL BOLLARDS IN FRONT

OF FDC, SEE DETAIL

INSTALL BOLLARDS IN FRONT

OF FDC, SEE DETAIL

EXISTING PIPING

FP-1

NEW FIRE PUMP

CONTROLLER

EXISTING PIPING

INSTALL NEW

CHECK VALVE

REMOTE FDC

Sheet Number:Designed By:

JOB No.

Phase:

Checked By:

Date Issued:

PROFESSIONAL SEALS:

CLIENT:

SHEET TITLE:

ISSUE LOG

CONSULTANT:

QC Review:

SHEET INFORMATION:

PROJECT NAME:

No. Date Description

O ra n g e C o u nt y

C o rr ec tio n s C

E P

F ir e P u m p S ys te m R ep la ce m en t

3r d S tr ee t, O rla nd o, F

482 SOUTH KELLER ROAD

ORLANDO, FL 32810

PHONE: 407.647.7275 FAX: 407.740.8958

Clifton John Alford, PE #46515

U s e rs

\t a b o

\O n e

D ri ve

C o rp \O n e D ri ve

N C

L a va lin G ro u p \D o c u m e n ts \1

O C

C C

C E

P F

R c a n it o

.r vt

F-101

100058985

10/30/2024

FIRE PUMP ROOM

1/2" = 1'-0" F-101

1 FIRE PUMP ROOM - NEW

F-101

2 FIRE PUMP ISO - NEW

Sheet Number:Designed By:

JOB No.

Phase:

Checked By:

Date Issued:

PROFESSIONAL SEALS:

CLIENT:

SHEET TITLE:

ISSUE LOG

CONSULTANT:

QC Review:

SHEET INFORMATION:

PROJECT NAME:

No. Date Description

O ra n g e C o u nt y

C o rr ec tio n s C

E P

F ir e P u m p S ys te m R ep la ce m en t

3r d S tr ee t, O rla nd o, F

482 SOUTH KELLER ROAD

ORLANDO, FL 32810

PHONE: 407.647.7275 FAX: 407.740.8958

Clifton John Alford, PE #46515

U s e rs

\t a b o

\O n e

D ri ve

C o rp \O n e D ri ve

N C

L a va lin G ro u p \D o c u m e n ts \1

O C

C C

C E

P F

R c a n it o

.r vt

F-102

100058985

10/30/2024

SITE PLANS

POINT OF SERVICE ON JOHN YOUNG AVENUE

MATCHLINE A-A MATCHLINE A-A

MATCHLINE B-B MATCHLINE B-B

M A

T C

H L

C -C

M A

T C

H L

C -C

NORTH CENTRAL SITE UTILITIES

N.T.S.

F-102

POINT OF SERVICE - JOHN YOUNG PKY

N.T.S.

F-102

N N

Phase:

Checked By:

Date Issued:

PROFESSIONAL SEALS:

CLIENT:

SHEET TITLE:

ISSUE LOG

CONSULTANT:

QC Review:

SHEET INFORMATION:

PROJECT NAME:

No. Date Description

O ra n g e C o u nt y

C o rr ec tio n s C

E P

F ir e P u m p S ys te m R ep la ce m en t

3r d S tr ee t, O rla nd o, F

482 SOUTH KELLER ROAD

ORLANDO, FL 32810

PHONE: 407.647.7275 FAX: 407.740.8958

Clifton John Alford, PE #46515

U s e rs

\t a b o

\O n e

D ri ve

C o rp \O n e D ri ve

N C

L a va lin G ro u p \D o c u m e n ts \1

O C

C C

C E

P F

R c a n it o

.r vt

F-103

100058985

10/30/2024

SITE PLANS

SERVICE LINE TO FIRE PUMP

MATCHLINE B-B MATCHLINE B-B

M A

T C

H L

C -C

M A

T C

H L

C -C

CENTRAL SITE UTILITIES

N.T.S.

F-103

Phase:

Checked By:

Date Issued:

PROFESSIONAL SEALS:

CLIENT:

SHEET TITLE:

ISSUE LOG

CONSULTANT:

QC Review:

SHEET INFORMATION:

PROJECT NAME:

No. Date Description

O ra n g e C o u nt y

C o rr ec tio n s C

E P

F ir e P u m p S ys te m R ep la ce m en t

3r d S tr ee t, O rla nd o, F

482 SOUTH KELLER ROAD

ORLANDO, FL 32810

PHONE: 407.647.7275 FAX: 407.740.8958

Clifton John Alford, PE #46515

U s e rs

\t a b o

\O n e

D ri ve

C o rp \O n e D ri ve

N C

L a va lin G ro u p \D o c u m e n ts \1

O C

C C

C E

P F

R c a n it o

.r vt

F-104

100058985

10/30/2024

SITE PLANS

POINT OF SERVICE ON 33RD STREET

MATCHLINE A-A MATCHLINE A-A

POINT OF SERVICE - 33RD ST.

N.T.S.

F-104

G-000 COVER 2

E-001 ELECTRICAL LEGEND, SYMBOLS AND GENERAL NOTES-E-001

E-001

ED-101 CEP BUILDING - DEMOLITION PLAN-ED-101

ED-101

ED-201 ELECTRICAL ONE-LINE DIAGRAM - DEMOLITION-ED-201

ED-201

E-101 CEP BUIL

E-102 CEP BUILDING - POWER PLAN-E-102

E-102

E-201 ELECTRICAL ONE-LINE DIAGRAM - NEW WORK-E-201

E-201

E-301 GENERATOR

E-302 FIRE PUMP CONTROLLER SPECIFICATIONS AND DETAILS-E-302

E-302

E-401 PANEL SCHEDULES-E-401

E-401

F-101 - FIRE PUMP ROOM

F-102 - SITE PLANS

F-103 - SITE PLANS

F-104 - SITE PLANS

File details come from the government source that posted it. Updated May 11, 2025.