Y23-738-RC_Ocoee_Security_Drawings.pdf

SGM

ELECTRICAL ENGINEER

935 LAKE BALDWIN LANE,

ORLANDO, FL 32814

(407) 767-5188

CONTACT: JUSTIN MUNDELL

PROJECT NUMBER:

ORANGE COUNTY MAYOR

COMMISSIONER DISTRICT 1

COMMISSIONER DISTRICT 2

COMMISSIONER DISTRICT 3

COMMISSIONER DISTRICT 4

COMMISSIONER DISTRICT 5

COMMISSIONER DISTRICT 6

ORANGE COUNTY PROJECT MANAGER:

05/04/2022

RE-BID / PERMIT ISSUE SET 2

CHRISTINE MOORE

NICOLE H. WILSON

MAYRA URIBE

MARIBEL GOMEZ CORDERO

EMILY BONILLA

VICTORIA P. SIPLIN

HONORABLE JERRY DEMINGS

JOHN AMES

CLERK OF COURTS

18268

ORANGE COUNTY

475 STORY RD #15

OCOEE, FL 34761

SECURITY UPGRADE

OCOEE SECURITY

ARCHITECTURAL DESIGN

COLLABORATIVE

ARCHITECT

945 N. PENNSYLVANIA AVENUE

WINTER PARK, FLORIDA 32789

(407) 629-1188

CONTACT: AL COOPER

STRUCTURAL ENGINEER

1214 EAST CONCORD STREET,

ORLANDO, FL 32803

(407) 377-7227

CONTACT: LAURA BARBERO-BUFFA

SECURITY CONSULTANT

3408 HILLCREST DRIVE

WACO, TX 76708

(512) 451-5445

CONTACT: TONY CHOJNOWSKI

OCCUPANCY LOAD CALCULATIONS BY OCCUPANCY CLASSIFICATION

LEVEL - EXISTING ONE STORY BUILDING MAIN FLOOR

GROSS FLOOR AREA

(SQ.FT)

FLOOR AREA IN SQ.FT. PER

OCCUPANT GROSS/NET

OCCUPANCY LOAD

(PERSONS)

BUSINESS AREAS 21896 150 146

ASSEMBLY 1811 15 121

STORAGE 3131 300 11

COURTROOM 1316 40 33

GYM (A-3 ASSEMBLY) 603 50 13

TOTAL SQUARE FOOTAGE AND OCCUPANCY LOAD 28757 324

PROJECT ADDRESS: 475 STORY RD #15

OCOEE, FL 34761

PROJECT NAME: ORANGE COUNTY

Ocoee Security

SECURITY UPGRADE

PROJECT DESCRIPTION: OCOEE SECURITY

AREA OF ALTERATION: 3,860 SQ.FT

VIEWNUMBER

SHEETNUMBER

TYP.

X

X-XXX

XX

X

VIEWNUMBER

SHEETNUMBER

TYP.

FABRIC WRAPPED PANEL

ACOUSTICAL TILE

CARPET

PLASTER WITH LATH

SECTION INDICATIONS

ELEVATION INDICATIONS

BRICK/CONCRETE BLOCK

FINISHED WOOD

GLASS

STONE

GYPSUM BOARD

INSULATION (LOOSE OR BATT)

INSULATION (RIGID)

GLASS (LARGE SCALE)

METAL

PLYWOOD

WOOD (FINISH)

WOOD (CONTINUOUS)

WOOD (BLOCKING)

EARTH OR NATURAL GROUND

SAND OR GROUT

POROUS FILL (GRAVEL)

INTERRUPTED MEMBER

BRICK

STONE

CONCRETE MASONRY UNIT

CONCRETE

NON-FERROUS ALUMINUM

PLASTER/ STUCCO

SURFACES

SHEET NOTE

ALIGN WITH ESTABLISHED

CONSTRUCTION

ROW ON ELEVATION SHEET

NORTH ARROW

REFLECTED CEILING

AND GRID

MAIN RUNNER

ACOUSTICAL CEILING

GYPSUM BOARD SOFFIT

ELEVATION NUMBER

SHEET WHERE SHOWN

VIEWNUMBER

SHEETNUMBER

TYP.

SECTION NUMBER

SHEET WHERE SHOWN

DIRECTION OF ELEVATION

DIRECTION OF SECTION

PLANE OF SECTION

SHEET WHERE SHOWN

DIRECTION OF ELEVATION

ELEVATION NUMBER

DETAIL AREA

DESCRIPTION OF

SIMILAR OR

OPPOSITE

SHEET WHERE

SHOWN

DETAIL NUMBER

HEIGHT REFERENCE

HEIGHT REFERENCE LEVEL

REVISION AREA

REVISION DELTA No

OFFICE ROOM NAME

ROOM NUMBER

XXXX

X'-XX"

N.T.S.

IMAGE TAKEN FROM GOOGLEMAPS.COM

ALL WORK FOR THIS PROJECT SHALL COMPLY WITH THE FOLLOWING CODES:

GRAPHIC SYMBOLS

VICINITY MAPCODE DATA

INDEX

ALIGN

EXPS EXPOSE(D)

REINF REINFORCE(D)(ING)

F S

T G

U

V

W

J

I

H

CABINET

AND AIR CONDITIONING

REINFORCED CONCRETE

REINFORCED GYPSUM

REINFORCED PLASTER

WTRPRF

WT

W/O

WDW

WD

WC

W/

VIF

VERT

VEH

UNO

UTIL

UNDRLAY

TYP

T&G

TRTD

TRANS

TRAF

TLT

THK

SYS

SUSP

SURF

STRUCT

STRFR

STL

STD

SST

SIM

SHORG

SGL

SF

SECUR

SCR

RO

RM

RFG

RESIL

JAN

INFILTR

INT

INTLK

INSUL

INSTRUM

INFO

HVAC

HORIZ

HM

HDWE

HDWD

HD

GYP

GR

GL

GFRP

GFRG

GFRC

GA

FUT

FURN

FLR

FXTR

FXD

FRMG

FR

FPLC

FLDG

FIN

FHC

FE&C

FE

FD

FAB

EXT

WATERPROOFING

WEIGHT

WITHOUT

WINDOW

WOOD

WATER CLOSET

WITH

VERIFY IN FIELD

VERTICAL

VEHICLE

UNLESS NOTED

UTILITY

UNDERLAYMENT

TYPICAL

TONGUE AND GROOVE

TREATED

TRANSPARENT

TRAFFIC

TOILET

THICK

SYSTEM(S)

SUSPENDED

SURFACE

STRUCTURAL

STOREFRONT

STEEL

STANDARD

STAINLESS STEEL

SIMILAR

SHORING

SINGLE

SQUARE FEET

SECURITY

SCRIBE

ROOM

ROOFING

RESILIENT

JANITOR

INFILTRATION

INTERIOR

INTERLOCK(ING)

INSULATION

INSTRUMENT(ATION)

INFORMATION

HEATING, VENTILATING,

HORIZONTAL

HOLLOW METAL

HARDWARE

HARDWOOD

HEAD

GYPSUM

GRAD(E)(ING)

GLASS

GLASS FIBER

GLASS FIBER

GLASS FIBER

GAUGE

FUTURE

FURNITURE

FLOOR(ING)

FIXTURE

FIXED

FRAMING

FIRE RAT(ING)(ED)

FIREPLACE

FOLDING

FINISH

FIRE HOSE CABINET

FIRE EXTINGUISHER AND

FIRE EXTINGUISHER

FLOOR DRAIN

FABRICATION

EXTERIOR

A

K

L

MB

C

N

O

D

P

RE

RESIS

REQD

REFR

REFL

REF

RECPT

RECES

RDR

PRTECN

PLYWD

PLSTC

PLAS

PLAM

PREFAB

PREFIN

PORT

POLYST

PNL

PBD

PEDTR

PTN

OPR

OPNG

OVHD

OVFL

ORNA

NTS

NO

NIC

MTD

MOT

MOIST

MLWK

MISC

MIN

MEZZ

MEMB

MET

MECH

MFR

MFD

MAX

LVR

LVLG

LT

LB

LAV

KIT

EXP JT

EXIST

EQUIP

ENTR

ENGR

EMBED

ELEC

ELAST

DWR

DSCON

DR

DN

DIV

DISP

DIM

DIFF

DIA

DF

DET

DES

DEPT

DBL

CMU

COV

CONTR

CONT

CONSTR

CONC

COILG

COATG

CLG

CER

CEM

CPT

CAB

BU

BRDLM

BLKG

BD

BOLLD

BLDG

AVG

AUTO

ARCH

APPL

ANOD

ANNUNC

ALT

AL

AFF

ACOUS

ACCES

RESIST(ANT)(IVE)

REQUIRED

REFRIGERATOR

REFLECTED

REFER(ENCE)

RECEPTACLE

RECESSED

READER

PROTECTION

PLYWOOD

PLASTIC

PLASTER

PLASTIC LAMINATE

PREFABRICATED

PREFINISHED

PORTABLE

POLYSTYRENE

PANEL

PARTICLE BOARD

PEDESTRIAN

PARTITION

OPERABLE

OPENING(S)

OVERHEAD

OVERFLOW

ORNAMENTAL

NOT TO SCALE

NUMBER

NOT IN CONTRACT

MOUNTED

MOTOR(IZED)

MOISTURE

MILLWORK

MISCELLANEOUS

MINIMUM

MEZZANINE

MEMBRANE

METAL

MECHANICAL

MANUFACTURER

MANUFACTURED

MAXIMUM

LOUVER

LEVELING

LIGHT

BRITISH POUND

POUND

LAVATORY

KITCHEN

EXPANSION JOINT

EXISTING

EQUIPMENT

EQUAL

ENTRANCE

ENGINEER(ED)

EMBEDD(ED)(ING)

ELECTRICAL

ELASTOMERIC

DRAWER

DISCONNECT

DOOR

DOLLAR (US CURRENCY)

DOWN

DIVISION

DISPENSER

DIMENSION

DIFFUSER

DIAMETER

DRINKING FOUNTAIN

DETAIL

DESIGN(ED)

DEPARTMENT

DOUBLE

COVER

CONTRACT(OR)

CONTINUOUS(ATION)

CONSTRUCTION

CONCRETE

COILING

COATING

CEILING

CERAMIC

CEMENT(ITIOUS)

CARPET

CABINET

BUILT UP

BROADLOOM

BLOCKING

BOARD

BOLLARD

BUILDING

AND

AVERAGE

AUTOMATIC

ARCHITECT(URAL)

APPLIANCE

ANODIZED

ANNUNCIATOR

ALTERNATE

ALUMINUM

ABOVE FINISHED FLOOR

ACOUSTIC(AL)

ACCESSORY

FWC FABRIC WALL COVERING

FUTUREFUT

AHJ

PjM PROJECT MANAGER

4' X 4' FLUORESCENT LIGHT

FIXTURE

2' X 2' FLUORESCENT LIGHT

FIXTURE

UNDER CABINET FLUORESCENT

FIXTURE

FLUORESCENT STRIP FIXTURE

ARCHITECTURAL ABBREVIATIONS

AUTHORITY HAVING

JURISDICTION

CONCRETE MASONRY

UNIT

(CURRENCY)

OTHERWISE

PROJECT INFORMATION

LOCATION MAP

AS SHOWED

Ocoee Security

SECURITY UPGRADE

OCOEE, FL 34761

475 STORY RD #15

ORANGE COUNTY

18268

INDEX AND PROJECT INFORMATION

A00.00

AJC

04 AJCBID/PERMIT ISSUE SET 205/04/2022

03 NRABID/PERMIT ISSUE SET11/11/19

02 NRA90% CD'S09/26/19

AJCNRA60% CD'S08/01/1901

RE-BID / PERMIT ISSUE SET 2

05/04/2022

NRA

N.T.S.

IMAGE TAKEN FROM GOOGLEMAPS.COM

BUILDING CODE: FLORIDA BUILDING CODE - BUILDING

7th Edition (2020)

FLORIDA BUILDING CODE - EXISTING BUILDING

7th Edition (2020)

FLORIDA BUILDING CODE - ACCESSIBILITY

7th Edition (2020)

FLORIDA BUILDING CODE - MECHANICAL

7th Edition (2020)

FLORIDA BUILDING CODE - PLUMBING

7th Edition (2020)

NFPA 70: NATIONAL ELECTRICAL CODE- 2017

FIRE PREVENTION CODE: FLORIDA FIRE PREVENTION CODE- 7th Edition 2020

BASED ON: NFPA 101 - 2018 LIFE SAFETY CODE

WITH FLORIDA AMENDMENTS AND NFPA 1 - 2018

FIRE CODE WITH FLORIDA AMENDMENTS

LEVEL OF ALTERATION: LEVEL 2

TYPE OF CONSTRUCTION: II

SPRINKLERED SPRINKLERED

OCCUPANT LOAD 324

REFER TO SHEET A00.50 FOR LIFE SAFETY PLAN

ORANGE COUNTY OCOEE SERVICE CENTER

PROJECT LOCATION:

ORANGE COUNTY OCOEE SERVICE CENTER

Consultant ● Seal/Signature

Sheet Title:

Project Number

Scale

File Name

Drawn By

Checked ByAR

CH

ITE

CT

UR

E

PL

AN

NI

NG

IN

TE

RI

OR

D

ES

IG

N

SP

AC

E

PL

AN

NI

NG

Issue Date

Project Status

PR

IN

TE

D

ON

Client Information

ADCARCHITECTURAL DESIGN COLLABORATIVE

Architect ● Seal/Signature

Issue

Project Documents for:

Date Issue Description

Project:

Check By

945 N. PENNSYLVANIA AVENUE

WINTER PARK, FLORIDA 32789

OFFICE: (407) 629-1188

FAX: (407) 388-1220

WWW. ADCINTERNATIONAL.NET

OVERALL SCOPE OF WORK:

1. BRANCH SECURITY ENHANCEMENTS.

SCOPE OF WORK NOTES:

1. ALL EXISTING WAITING AREA SEATING WILL BE REUSED AND RELOCATED

TO ACCOMMODATE NEW WEAPON SCREENING AREA.

2. CONTRACTOR WILL PATCH AND REPAIR WALLS AND CEILINGS ADJACENT TO

CONSTRUCTION AS REQUIRED, INCLUDING PAINT AND FINISH TO MATCH

THE EXISTING WALL OR CEILING.

3. WORK THAT IS NOT STATED HEREIN NOR SHOWN IN THESE PLANS IS NOT

PART OF THE SCOPE OF WORK FOR THIS PROJECT.

4. ADDITIONAL WORK REQUIRED THAT WOULD ALTER THE PRESENTED SCOPE

OF WORK SHALL BE SUBJECT TO A REVISION OF THESE DOCUMENTS AND

TO BE REVIEWED BY THE BUILDING DEPARTMENT HAVING JURISDICTION.

1. THE BUILDING WILL REMAIN IN OPERATION DURING CONSTRUCTION.

2. ALL CONSTRUCTION WORK WILL BE PERFORMED AFTER BUSINESS HOURS.

NOTE TO CONTRACTOR

SCOPE OF WORK

STRUCTURAL

S5.001 GENERAL NOTE AND DETAILS

ELECTRICAL

E00.01 ELECTRICAL SYMBOLS LEGEND

E01.01A OVERALL DEMO PLAN - ELECTRICAL

E01.01B ENLARGED DEMO PLAN - ELECTRICAL

E01.01C ENLARGED DEMO PLAN - ELECTRICAL

E02.01A OVERALL CONSTRUCTION PLAN - ELECTRICAL

E02.01B ENLARGED CONSTRUCTION PLAN - ELECTRICAL

E02.01C ENLARGED CONSTRUCTION PLAN - ELECTRICAL

E07.01 ELECTRICAL SCHEDULES

RE-BID / PIS AJCNRA01/20/211

ARCHITECTURAL

COVER COVER

A00.00 INDEX AND PROJECT INFORMATION

A00.10 GENERAL NOTES

A00.11 GENERAL NOTES

A00.12 GENERAL NOTES

A00.13 RFI's A00.14 RFI's

A00.30 DOOR FRAME & HARDWARE SCHEDULES

A00.40 ACCESIBILITY DETAILS

A00.50 LIFE SAFETY PLAN

A01.00 EXISTING CONDITIONS

A01.01A DEMOLITION PLAN

A01.01B ENLARGED DEMOLITION PLAN

A01.01C ENLARGED DEMO PLANS

A02.01A CONSTRUCTION FLOOR PLAN

A02.01B ENLARGED CONSTRUCTION FLOOR PLAN

A02.01C ENLARGED CONSTRUCTION FLOOR PLANS

A04.01 PROPOSED REFLECTED CEILING PLAN

AutoCAD SHX Text

AutoCAD SHX Text

EQ

AutoCAD SHX Text

AutoCAD SHX Text ALBERT JOSEPH COOPER III AR-0010460 STATE OF FLORIDA REGISTRATION NUMBER AA-C001315

AutoCAD SHX Text

MEANS OF EGRESS REQUIREMENTS - PRIMARILY BUSINESS OCCUPANCY - SPRINKLERED

AutoCAD SHX Text

EXIT ACCESS TRAVEL DISTANCE:

AutoCAD SHX Text

300FT (WITH SPRINKLER SYSTEM) TABLE 1017.2

AutoCAD SHX Text

MAX. COMMON PATH OF EGRESS TRAVEL DISTANCE:

AutoCAD SHX Text

100FT (WITH SPRINKLER SYSTEM) TABLE 1006.2.1

AutoCAD SHX Text

MAX. DEAD END CORRIDOR: 50FT (WITH SPRINKLER SYSTEM) PER 1020.4

AutoCAD SHX Text 116 BREAK ROOM 95 Sq.Ft. ASSEMBLY @ 15 SQ.FT./OCC.

AutoCAD SHX Text 117 VESTIBULE 74 Sq.Ft. BUSINESS

AutoCAD SHX Text 117A SHOWER 112 Sq.Ft. BUSINESS

AutoCAD SHX Text 118 STORAGE 67 Sq.Ft. STORAGE @ 300 SQ.FT./OCC

AutoCAD SHX Text 119 BRIEFING ROOM 619 Sq.ft. BUSINESS

AutoCAD SHX Text 120 EVIDENCE ROOM 90 Sq.Ft. BUSINESS

AutoCAD SHX Text 121 SEARGENT OFFICE 116 Sq.Ft. BUSINESS

AutoCAD SHX Text 123 SEARGENT OFFICE 128 Sq.Ft. BUSINESS

AutoCAD SHX Text 115 COURT ROOM 1,316 Sq.Ft. COURTROOM @ 40 SQ.FT./OCC.

AutoCAD SHX Text 114 BALIFF'S OFFICE 159 Sq.Ft. BUSINESS

AutoCAD SHX Text 113 JURY ROOM 280 Sq.Ft. ASSEMBLY @ 15 SQ.FT./OCC.

AutoCAD SHX Text 112 COURT ADMIN. OFFICE 296 Sq.Ft. BUSINESS

AutoCAD SHX Text 110 SECRETARY 199 Sq.Ft. BUSINESS

AutoCAD SHX Text 108 JUDGE'S CHAMBER 361 Sq.Ft. BUSINESS

AutoCAD SHX Text 106 OFFICE 398 Sq.Ft. BUSINESS

AutoCAD SHX Text 107 OFFICE BIKE PATROL 392 Sq.Ft. BUSINESS

AutoCAD SHX Text 104A OFFICE 295 Sq.Ft. BUSINESS

AutoCAD SHX Text 104 OFFICE 207 Sq.Ft. BUSINESS

AutoCAD SHX Text 103 OFFICE 201 Sq.Ft. BUSINESS

AutoCAD SHX Text 102 DRESSING 44 Sq.Ft. BUSINESS

AutoCAD SHX Text 101D DIRECTORS OFFICE 128 Sq.Ft. BUSINESS

AutoCAD SHX Text 101C STORAGE VAULT 183 Sq.Ft. BUSINESS

AutoCAD SHX Text 101B STORAGE CASE FILING 311 Sq.Ft. BUSINESS

AutoCAD SHX Text 101A LOUNGE 224 Sq.Ft. ASSEMBLY @ 15 SQ.FT./OCC.

AutoCAD SHX Text 101 COURT RECORDS OFFICE 1,744 Sq.Ft. BUSINESS @ 150 SQ.FT./OCC. TYP.

AutoCAD SHX Text

ROOM SQUARE FOOTAGE OCCUPANCY CLASSIFICATION

AutoCAD SHX Text

AREA CALCULATIONS AND OCCUPANCY CLASSIFICATIONS BY FUNCTION/ROOM

AutoCAD SHX Text TOTAL: 28,757 Sq.Ft.

AutoCAD SHX Text 105 OFFICE 278 Sq.Ft. BUSINESS

AutoCAD SHX Text 124 LIEUTENANT OFFICE 122 Sq.Ft. BUSINESS

AutoCAD SHX Text 125 CAPTAINS OFFICE 167 Sq.Ft. BUSINESS

AutoCAD SHX Text 126 LIEUTENANT OFFICE 134 Sq.Ft. BUSINESS

AutoCAD SHX Text 127 SECRETARY 148 Sq.Ft. BUSINESS

AutoCAD SHX Text 128 OFFICE/COMPUTER 189 Sq.Ft. BUSINESS

AutoCAD SHX Text 129 RECEPTION 173 Sq.Ft. BUSINESS

AutoCAD SHX Text 132A TAXES & TAGS 496 Sq.Ft. BUSINESS

AutoCAD SHX Text 132B OFFICE 96 Sq.Ft. BUSINESS

AutoCAD SHX Text 132C STORAGE/LOUNGE 271 Sq.Ft. BUSINESS

AutoCAD SHX Text 132D STORAGE 109 Sq.Ft. STORAGE @ 300 SQ.FT./OCC.

AutoCAD SHX Text 133 SOCIAL SERVICE OFFICE 174 Sq.Ft. BUSINESS

AutoCAD SHX Text 133A OFFICE 116 Sq.Ft. BUSINESS

AutoCAD SHX Text 149 WAITING AREA 839 Sq.Ft. ASSEMBLY @ 15 SQ.FT./OCC.

AutoCAD SHX Text 149A INTERVIEW 108 Sq.Ft. BUSINESS

AutoCAD SHX Text 149B OFFICE 59 Sq.Ft. BUSINESS

AutoCAD SHX Text 149C STORAGE 35 Sq.Ft. STORAGE @ 300 SQ.FT./OCC

AutoCAD SHX Text 150 STORAGE 88 Sq.ft. STORAGE @ 300 SQ.FT./OCC.

AutoCAD SHX Text 151 PUBLIC DEFENSE OFFICE 85 Sq.Ft. BUSINESS

AutoCAD SHX Text 152 STORAGE 734 Sq.Ft. STORAGE @ 300 SQ.FT./OCC.

AutoCAD SHX Text 153 STORAGE 85 Sq.Ft. STORAGE @ 300 SQ.FT./OCC.

AutoCAD SHX Text 148 RECORDS OFFICE 432 Sq.Ft. BUSINESS

AutoCAD SHX Text 147 OPEN OFFICE 250 Sq.Ft. BUSINESS

AutoCAD SHX Text 146 OFFICE 129 Sq.Ft. BUSINESS

AutoCAD SHX Text 145 EXAM ROOM 143 Sq.Ft. BUSINESS

AutoCAD SHX Text 144 HEAD NURSES OFFICE 120 Sq.Ft. BUSINESS

AutoCAD SHX Text 143 DENTIST OFFICE 124 Sq.Ft. BUSINESS

AutoCAD SHX Text 141 EXAM ROOM 123 Sq.Ft. BUSINESS

AutoCAD SHX Text 142 LAB 124 Sq.Ft. BUSINESS

AutoCAD SHX Text 139B STORAGE/LOUNGE 120 Sq.Ft. STORAGE @ 300 SQ.FT./OCC.

AutoCAD SHX Text 139 EXAM ROOM 123 Sq.Ft. BUSINESS

AutoCAD SHX Text 138A DEPUTYS OFFICE 120 Sq.Ft. BUSINESS

AutoCAD SHX Text 138 OFFICE COMMUNITY POLICE 222 Sq.Ft. BUSINESS

AutoCAD SHX Text 137 EXAM ROOM 124 Sq.Ft. BUSINESS

AutoCAD SHX Text 136 OFFICE 236 Sq.Ft. BUSINESS

AutoCAD SHX Text 135 EXAM ROOM 113 Sq.Ft. BUSINESS

AutoCAD SHX Text 134A KITCHEN 109 Sq.Ft. ASSEMBLY @ 15 SQ.FT./OCC.

AutoCAD SHX Text 134 NURSES OFFICE 245 Sq.Ft. BUSINESS @ 150 SQ.FT./OCC. TYP.

AutoCAD SHX Text 140 NURSES OFFICE 365 Sq.Ft. BUSINESS

AutoCAD SHX Text 154 OFFICE 88 Sq.Ft. BUSINESS

AutoCAD SHX Text 199 CENTRAL CONCOURSE 5,867 Sq.Ft. BUSINESS

AutoCAD SHX Text 199A CORRIDOR 623 Sq.Ft. BUSINESS

AutoCAD SHX Text 199B CORRIDOR 303 Sq.Ft. BUSINESS

AutoCAD SHX Text 199D CORRIDOR 392 Sq.Ft. BUSINESS

AutoCAD SHX Text 199E CORRIDOR 736 Sq.Ft. BUSINESS

AutoCAD SHX Text C100A TELEPHONE 40 Sq.Ft. STORAGE @ 300 SQ.FT./OCC.

AutoCAD SHX Text C100C TELEPHONE 96 Sq.Ft. STORAGE @ 300 SQ.FT./OCC.

AutoCAD SHX Text J100A JANITOR 117 Sq.Ft. STORAGE @ 300 SQ.FT./OCC.

AutoCAD SHX Text M100A MAINTENANCE 90 Sq.Ft. STORAGE @ 300 SQ.FT./OCC.

AutoCAD SHX Text M100B MECHANICAL 591 Sq.Ft. STORAGE @ 300 SQ.FT./OCC.

AutoCAD SHX Text 147A TEACHING AREA 263 Sq.Ft. BUSINESS

AutoCAD SHX Text 130 GYM 603 Sq.Ft. ASSEMBLY A-3 @ 50 SQ.FT./OCC

AutoCAD SHX Text M100C MECHANICAL 715 Sq.Ft. STORAGE @ 300 SQ.FT./OCC.

AutoCAD SHX Text R100A WOMENS 77 Sq.Ft. BUSINESS

AutoCAD SHX Text R100B TOILET 42 Sq.Ft. BUSINESS

AutoCAD SHX Text R100E WOMENS 218 Sq.Ft. BUSINESS

AutoCAD SHX Text R100F MENS 206 Sq.Ft. BUSINESS

AutoCAD SHX Text R100G TOILET 51 Sq.Ft. BUSINESS

AutoCAD SHX Text R100H TOILET 39 Sq.Ft. BUSINESS

AutoCAD SHX Text R100M TOILET 62 Sq.Ft. BUSINESS

AutoCAD SHX Text R100C MENS 77 Sq.Ft. BUSINESS

AutoCAD SHX Text R100D TOILET 90 Sq.Ft. BUSINESS

AutoCAD SHX Text R100I TOILET 48 Sq.Ft. BUSINESS

AutoCAD SHX Text R100J TOILET 46 Sq.Ft. BUSINESS

AutoCAD SHX Text R100K TOILET 40 Sq.Ft. BUSINESS

AutoCAD SHX Text R100L TOILET 46 Sq.Ft. BUSINESS

AutoCAD SHX Text C100B TELEPHONE 38 Sq.Ft. STORAGE @ 300 SQ.FT./OCC.

AutoCAD SHX Text 101E WAITING ROOM OFFICE 459 Sq.Ft. BUSINESS

AutoCAD SHX Text 117 STORAGE 206 Sq.Ft. STORAGE @ 300 SQ. FT./OCC.

AutoCAD SHX Text 133B OFFICE 120 Sq.Ft. BUSINESS

AutoCAD SHX Text 199C CORRIDOR 108 Sq.Ft. BUSINESS

AutoCAD SHX Text

- CORRIDOR 120 Sq.Ft. BUSINESS

AutoCAD SHX Text

- CORRIDOR 49 Sq.Ft. BUSINESS

AutoCAD SHX Text 122 CORRIDOR 60 Sq.Ft. BUSINESS

AutoCAD SHX Text 132 WAITING ROOM 264 Sq.Ft. ASSEMBLY @ 15 SQ.FT./OCC.

./A00.00 INDEX.DWG

./A00.00 INDEX.DWG

./A00.30 DOOR SCHEDULE.DWG

./A00.30 DOOR SCHEDULE.DWG

./A00.40 ACCESIBILITY DETAILS.DWG

./A00.40 ACCESIBILITY DETAILS.DWG

./A01.00 EXISTING CONDITIONS.DWG

./A01.00 EXISTING CONDITIONS.DWG

./A01.01A DEMOLITION PLAN.DWG

./A01.01A DEMOLITION PLAN.DWG

./A01.01B DEMOLITION PLAN - ENLARGED PLANS.DWG

./A01.01B DEMOLITION PLAN - ENLARGED PLANS.DWG

./A01.01C DEMOLITION PLAN - ENLARGED PLANS.DWG

./A01.01C DEMOLITION PLAN - ENLARGED PLANS.DWG

./A02.01A CONSTRUCTION PLAN.DWG

./A02.01A CONSTRUCTION PLAN.DWG

./A02.01B CONSTRUCTION PLAN - ENLARGED PLAN.DWG

./A02.01B CONSTRUCTION PLAN - ENLARGED PLAN.DWG

./A02.01C CONSTRUCTION PLAN - ENLARGED PLANS.DWG

./A02.01C CONSTRUCTION PLAN - ENLARGED PLANS.DWG

./A04.01 PROPOSED RCP.DWG

./A04.01 PROPOSED RCP.DWG

1.0 GENERAL NOTES & CONDITIONS GEN. NOTES & CONDITIONS (CONT.) CONSTRUCTION PLAN NOTES (CONT.)

2.0 CONSTRUCTION PLAN NOTES

3.0 REFLECTED CLG & MECH. SYS

Consultant ● Seal/Signature

Sheet Title:

Project Number

Scale

File Name

Drawn By

Checked ByAR

CH

ITE

CT

UR

E

PL

AN

NI

NG

IN

TE

RI

OR

D

ES

IG

N

SP

AC

E

PL

AN

NI

NG

Issue Date

Project Status

PR

IN

TE

D

ON

Client Information

ADCARCHITECTURAL DESIGN COLLABORATIVE

Architect ● Seal/Signature

Issue

Project Documents for:

Date Issue Description

Project:

Check By

945 N. PENNSYLVANIA AVENUE

WINTER PARK, FLORIDA 32789

OFFICE: (407) 629-1188

FAX: (407) 388-1220

WWW. ADCINTERNATIONAL.NET

GEN. NOTES & CONDITIONS (CONT.)

Ocoee Security

SECURITY UPGRADE

OCOEE, FL 34761

475 STORY RD #15

ORANGE COUNTY

A00.10

RE-BID / PERMIT ISSUE SET 2

05/04/2022

AutoCAD SHX Text

3.1 SCOPE: GC SHALL FURNISH AND INSTALL CONTINUOUS GRID SUSPENDED ACOUSTICAL TILE CEILING MATERIAL AS SPECIFIED AND AS INDICATED ON PLAN AND PROVIDE CUT OUTS AND OTHER PROVISIONS FOR OTHER TRADES AS REQUIRED. 3.2 CEILING GRID SYSTEM SHALL BE IN CONFORMANCE WITH ASTM C 635 AND WITH GENERAL PRACTICES AND APPLICABLE STATE AND LOCAL ORDINANCES. INSTALLATION SHALL BE IN CONFORMANCE WITH MANUFACTURERS RECOMENDATIONS AND ASTM C 636. 3.3 GC SHALL VERIFY CONFORMANCE WITH LOCAL AND STATE CODES AND BUILDING STANDARDS BEFORE SUBMITTING FINAL PRICING.

AutoCAD SHX Text

1.22 NOT USED

AutoCAD SHX Text

1.12 THE GC SHALL PREPARE, REVIEW, STAMP WITH APPROVAL AND SUBMIT, WITH REASONABLE PROMPTNESS AND IN ORDERLY SEQUENCE SO AS TO CAUSE NO DELAY IN THE WORK, SUBMITTALS REQUIRED BY THE CONTRACT DOCUMENTS, TO ARCHITECT FOR REVIEW. SUBMIT FIVE (5) COPIES. REQUIRED SUBMITTALS: SHOP DRAWINGS, PRODUCT AND SAMPLES AS REQUIRED IN INDIVIDUAL SECTIONS. SAMPLES: WHEN REQUIRED SUBMIT TWO (2). CONSTRUCTION SCHEDULE: LINEAR BAR CHART, TIME CONTROLS, SHOP DRAWINGS: PDF COPY AS BUILTS: HARD COPY.

AutoCAD SHX Text

1.2 UPON COMPLETION OF THE JOB, THE CONTRACTOR SHALL PROVIDE THE OWNER WITH: A. AS-BUILT PLANS. AS-BUILT PLANS. B. RELEASE OF LIENS FOR ALL SUB-CONTRACTORS. RELEASE OF LIENS FOR ALL SUB-CONTRACTORS. C. THE ORIGINAL BUILDING PERMIT PLANS WITH THE ORIGINAL THE ORIGINAL BUILDING PERMIT PLANS WITH THE ORIGINAL INSPECTOR'S SIGNATURES.

AutoCAD SHX Text

1.3 THE OWNER WILL NOT BE RESPONSIBLE FOR:

AutoCAD SHX Text

A. SECURITY OF MATERIALS OF WORK IN PLACE.

AutoCAD SHX Text

B. SEE ENGINEERING DRAWINGS FOR WORK RELATED TO THE

AutoCAD SHX Text

BUILDING SYSTEMS/MEPF.

AutoCAD SHX Text

C. WARRANTY REPAIRS.

AutoCAD SHX Text

D. WINDOW BREAKAGE DURING CONSTRUCTION.

AutoCAD SHX Text

E. WORK STOPPAGES DUE TO WORK INTERFERING WITH OTHER

AutoCAD SHX Text

TENANTS.

AutoCAD SHX Text

F. DELAYS DUE TO CHANGE ORDERS AND ARCHITECT-

AutoCAD SHX Text

CONTRACTOR PROBLEMS.

AutoCAD SHX Text

G. PAYMENT OF ANY DRAW WILL BE SUBJECT TO THE OWNER'S

AutoCAD SHX Text

REPRESENTATIVES AGREEING TO THE DEGREE OF COMPLETION.

AutoCAD SHX Text

TEN PERCENT (10%) OF EACH DRAW WILL BE HELD AS A RETAINER

AutoCAD SHX Text

UNTIL THE JOB IS COMPLETED, INCLUDING PUNCH LIST ITEMS,

AutoCAD SHX Text

RELEASES OF LIEN, AND ACCEPTANCE OF THE SPACE BY BOTH THE

AutoCAD SHX Text

TENANT AND OWNER.

AutoCAD SHX Text

1.4 THE CONTRACTOR WILL:

AutoCAD SHX Text

SECURE THE NECESSARY BUILDING PERMITS AND INSPECTIONS.

AutoCAD SHX Text

INDEMNIFY AND KEEP HARMLESS THE OWNER FROM ALL LOSSES,

AutoCAD SHX Text

DAMAGES, LIABILITIES, AND EXPENSES WHICH MAY ARISE OR BE CLAIMED

AutoCAD SHX Text

AGAINST THE LANDLORD AND BE IN FAVOR OF ANY PERSONS, FIRMS, OR

AutoCAD SHX Text

CORPORATIONS FOR ANY INJURIES OR DAMAGES TO THE PERSON OR

AutoCAD SHX Text

PROPERTY OF ANY PERSONS, FIRMS, OR CORPORATION CONSEQUENT

AutoCAD SHX Text

UPON OR ARISING FROM THE CONSTRUCTION, USE, OR OCCUPANCY OF

AutoCAD SHX Text

LEASED PREMISES BY THE CONTRACTOR OR CONSEQUENT UPON OR

AutoCAD SHX Text

ARISING FROM ANY ACTS, OMISSIONS, NEGLECT OR FAULT OF THE

AutoCAD SHX Text

CONTRACTOR , HIS AGENTS, SERVANTS, EMPLOYEES, LICENSEES,

AutoCAD SHX Text

VISITORS, CUSTOMERS, PATRONS, OR INVITEES, OR CONSEQUENT UPON

AutoCAD SHX Text

OR ARISING FROM THE CONTRACTOR'S FAILURE TO COMPLY WITH ANY

AutoCAD SHX Text

LAWS, STATUTES, ORDINANCES, CODES, OR REGULATIONS; THAT THE

AutoCAD SHX Text

OWNERS SHALL NOT BE LIABLE TO THE CONTRACTOR FOR DAMAGES,

AutoCAD SHX Text

LOSSES OR INJURIES TO THE PERSONS, FIRMS OR CORPORATIONS

AutoCAD SHX Text

EXCEPT WHEN SUCH INJURY, LOSS, OR DAMAGE RESULTS FROM

AutoCAD SHX Text

NEGLIGENCE OF THE OWNER, HIS AGENTS, OR EMPLOYEES, AND THAT

AutoCAD SHX Text

THE CONTRACTOR WILL IDEMNIFY AND KEEP HARMLESS THE OWNERS

AutoCAD SHX Text

AND BE IN FAVOR OF ANY PERSONS, FIRMS, OR CORPORATIONS FOR ANY

AutoCAD SHX Text

INJURIES OR DAMAGES TO THE PERSON, OR THE PROPERTY OF ANY

AutoCAD SHX Text

PERSONS, FIRMS OR CORPORATIONS WHERE SAID INJURIES OR

AutoCAD SHX Text

DAMAGES AROSE ABOUT OR UPON THE LEASED PREMISES AS A RESULT

AutoCAD SHX Text

OF THE NEGLIGENCE OF THE CONTRACTOR, HIS AGENTS, EMPLOYEES,

AutoCAD SHX Text

SERVANTS, LICENSES, VISITORS, CUSTOMERS, PATRONS, AND INVITEES.

AutoCAD SHX Text

ALL PERSONAL PROPERTY PLACED OR MOVED INTO OR OUT OF THE

AutoCAD SHX Text

BUILDING SHALL BE AT THE RISK OF THE CONTRACTOR OR THE OWNER

AutoCAD SHX Text

THEREFORE AND THE OWNERS SHALL NOT BE LIABLE TO THE CONTRACTOR

AutoCAD SHX Text

FOR ANY DAMAGE TO ANY PERSONAL PROPERTY.

AutoCAD SHX Text

1.5 THE CONTRACTOR WILL CONFINE THE CONSTRUCTION DEBRIS AND DUST TO THE CONSTRUCTION AREA, AWAY FROM COMPLETED TENANT SPACE OR COMMON AREAS, ALL AREAS OF THE BUILDING, ESPECIALLY ACCESS AREAS AND COMMON AREAS, ARE TO BE MAINTAINED IN A CLEAN AND ORDERLY FASHION. THE CONTRACTOR IS TO TURN THE IMPROVED PREMISES OVER THE PROPERTY MANAGER IN A CLEAN CONDITION, READY FOR OCCUPANCY BY THE TENANT.

AutoCAD SHX Text

1.6 THE CONTRACTOR WILL REMOVE ALL TRASH AND DEBRIS, INCLUDING

AutoCAD SHX Text

EXCESS MATERIALS FROM THE CONSTRUCTION SITE AND THE BUILDING

AutoCAD SHX Text

AND NO UNREASONABLE ACCUMULATION BE ALLOWED.

AutoCAD SHX Text

1.7 THE CONTRACTOR WILL COORDINATE THE DELIVERY OF AND

AutoCAD SHX Text

REMOVAL OF DEBRIS WITH THE PROPERTY MANAGER/OWNER.

AutoCAD SHX Text

1.8 THE CONTRACTOR WILL SUBMIT ALL CHANGE ORDERS TO THE

AutoCAD SHX Text

OWNER/ARCHITECT FOR APPROVAL AND THE BLUEPRINTS ARE TO BE

AutoCAD SHX Text

REVISED ACCORDINGLY.

AutoCAD SHX Text

1.9 UPON COMPLETION, THE CONTRACTOR WILL REMOVE ALL FOREIGN

AutoCAD SHX Text

MATERIALS FROM WINDOWS, FLOORS, GLASS, HARDWARE, ROOF AND

AutoCAD SHX Text

GENERAL WORK AREA(S).

AutoCAD SHX Text

1.10 THE CONTRACTOR WILL NOT UNDULY DISTURB "THE PEACEFUL

AutoCAD SHX Text

ENJOYMENT OF" ANY TENANTS IN THE BUILDING. ALL WORK THAT COULD

AutoCAD SHX Text

CAUSE DISRUPTION OR NOISY CONDITIONS SHALL BE COORDINATED WITH

AutoCAD SHX Text

THE OWNER/CLIENT PRIOR TO COMMENCEMENT OF SUCH ACTIVITY.

AutoCAD SHX Text

1.17 NOT USED

AutoCAD SHX Text

1.18 WHERE EXISTING WALLS, CEILINGS OR FIXTURES ARE REMOVED:

AutoCAD SHX Text

WALLS CEILINGS AND FLOORS SHALL BE PATCHED; ELECTRIC AND

AutoCAD SHX Text

PLUMBING SHALL BE CAPPED.

AutoCAD SHX Text

1.19 NOT USED

AutoCAD SHX Text

1.20 ANY ITEM OF WORK NECESSARY TO THE PROPER COMPLETION OF

AutoCAD SHX Text

CONSTRUCTION WHICH IS NOT SPECIFICALLY COVERED IN THESE

AutoCAD SHX Text

DOCUMENTS SHALL BE PERFORMED IN A MATTER DEEMED GOOD

AutoCAD SHX Text

PRACTICE OF THE TRADE.

AutoCAD SHX Text

1.24 NOT USED

AutoCAD SHX Text

1.25 NOT USED

AutoCAD SHX Text

1.26 NOT USED

AutoCAD SHX Text

1.27 NOT USED

AutoCAD SHX Text

1.28 USE AND INTERPRETATION OF THIS DRAWING:

AutoCAD SHX Text

A. GENERAL CONDITIONS OF THE CONTRACT FOR

AutoCAD SHX Text

CONSTRUCTION, AIA DOCUMENT A201, ARE A PART OF A CONTRACT

AutoCAD SHX Text

DOCUMENT AS DESCRIBED USE AND INTENT OF THE DRAWINGS. THE

AutoCAD SHX Text

CONTRACT DOCUMENTS INCLUDE NOT ONLY THE DRAWINGS, BUT

AutoCAD SHX Text

ALSO THE

AutoCAD SHX Text

OWNER-CONTRACTOR AGREEMENT, CONDITIONS OF THE

AutoCAD SHX Text

CONTRACT, THE SPECIFICATIONS, ADDENDA, AND MODIFICATIONS

AutoCAD SHX Text

ISSUED AFTER EXECUTION OF THE CONTRACT. THESE CONTRACT

AutoCAD SHX Text

DOCUMENTS ARE COMPLEMENTARY, AND WHAT IS REQUIRED BY ANY

AutoCAD SHX Text

ONE SHALL BE BINDING AS IF REQUIRED BY ALL. WORK NOT

AutoCAD SHX Text

COMPLETELY DELINEATED HEREON SHALL BE CONSTRUCTED OF THE

AutoCAD SHX Text

SAME MATERIALS AND DETAILED SIMILARLY AS WORK SHOWN MORE

AutoCAD SHX Text

COMPLETELY ELSEWHERE IN THE CONTRACT DOCUMENTS.

AutoCAD SHX Text

B. BY USE OF THE DRAWINGS FOR CONSTRUCTION OF THE

AutoCAD SHX Text

PROJECT THE OWNER REPRESENTS THAT HE HAS REVIEWED AND

AutoCAD SHX Text

APPROVED THE DRAWINGS, AND THAT THE CONSTRUCTION

AutoCAD SHX Text

DOCUMENT PHASE OF THE PROJECT IS COMPLETE. THE CONTRACTOR

AutoCAD SHX Text

REPRESENTS THAT HE HAS VISITED THE SITE, FAMILIARIZED HIMSELF

AutoCAD SHX Text

WITH THE

AutoCAD SHX Text

LOCAL CONDITIONS, VERIFIED FIELD DIMENSIONS AND

AutoCAD SHX Text

CORRELATED HIS OBSERVATIONS WITH THE REQUIREMENTS OF THE

AutoCAD SHX Text

CONTRACT DOCUMENTS.

AutoCAD SHX Text

C. THE CONTRACT SUM AND THE CONTRACT TIME MAY BE

AutoCAD SHX Text

CHANGED ONLY BY CHANGE ORDER TO THE CONTRACTOR

AutoCAD SHX Text

SIGNED BY THE OWNER AND THE ARCHITECT. ANY WORK PERFORMED

AutoCAD SHX Text

IN VARIANCE WITH THE CONTRACT DOCUMENTS AND NOT COVERED

AutoCAD SHX Text

BY THE ARCHITECT'S WRITTEN ORDER FOR A MINOR CHANGE IN THE

AutoCAD SHX Text

WORK OR A CHANGE ORDER, WILL NOT BE ACCEPTED.

AutoCAD SHX Text

D. AS INSTRUMENTS OF SERVICE, ALL DRAWINGS,

AutoCAD SHX Text

SPECIFICATIONS AND COPIES THEREOF FURNISHED BY THE

AutoCAD SHX Text

ARCHITECT ARE HIS SPECIFICATIONS AND PROPERTY. THEY ARE TO

AutoCAD SHX Text

BE USED ONLY FOR THIS PROJECT AND ARE NOT TO BE USED ON ANY

AutoCAD SHX Text

OTHER PROJECT. CHANGES TO THE DRAWINGS MAY ONLY BE MADE

AutoCAD SHX Text

BY THE ARCHITECT. ANY SUBMISSION OR DISTRIBUTION WITHOUT THE

AutoCAD SHX Text

EXPRESS WRITTEN CONSENT OF THE ARCHITECT MAY BE

AutoCAD SHX Text

CONSTRUED AS DEROGATION OF THE ARCHITECT COPYRIGHT OR

AutoCAD SHX Text

OTHER RESERVED RIGHTS.

AutoCAD SHX Text

1.29 ALL WORK SHALL BE CONSTRUCTED IN ACCORDANCE USING OR FOLLOWING

AutoCAD SHX Text

THE LATEST EDITION OF THE ADA STANDARDS FOR ACCESSIBLE DESIGN, AS

AutoCAD SHX Text

PUBLISHED BY THE STATE OF FLORIDA AND THE U.S. DEPARTMENT OF JUSTICE.

AutoCAD SHX Text THE CONTRACTOR AND SUBCONTRACTORS SHALL BE RESPONSIBLE FOR THE IMPLEMENTATION OF THE STANDARDS.

AutoCAD SHX Text

2.3 GC SHALL BE RESPONSIBLE FOR FIELD MEASURING OF EXISTING

AutoCAD SHX Text

CONDITIONS PRIOR TO START OF WORK AND DURING CONSTRUCTION, AS

AutoCAD SHX Text

NECESSARY, TO ASSURE CONSTRUCTION ADHERENCE TO DRAWINGS. BY

AutoCAD SHX Text

ENTERING INTO A CONSTRUCTION CONTRACT FOR THIS WORK, GC SHALL

AutoCAD SHX Text

INDICATE HIS FAMILIARITY WITH THE SITE/FIELD CONDITIONS.

AutoCAD SHX Text

A. ALL 'HOLD' DIMENSIONS SHALL BE MONITORED TO ASSURE

AutoCAD SHX Text

CORRECTNESS.

AutoCAD SHX Text B. ANY DIMENSION REVISIONS/MODIFICATIONS ARE TO BE BROUGHT TO THE ATTENTION OF ARCHITECT PROJECT MANAGER FOR REVIEW/APPROVAL.

AutoCAD SHX Text

2.4 ALL VERTICAL DIMENSIONS SHALL BE TAKEN FROM "BENCH MARK" OR

AutoCAD SHX Text

OTHER SIMILAR GUIDE ESTABLISHED PRIOR TO START OF CONSTRUCTION.

AutoCAD SHX Text HIGH POINTS, LOW POINTS, IRREGULARITIES IN FLOOR SLAB, PARTICULARLY, WHICH COULD IN ANY WAY AFFECT FABRICATION/INSTALLATION WORK OF OTHER TRADES OR VENDORS (E.G., CABINET CONTRACTORS), SHALL BE BROUGHT TO THE ATTENTION OF THE ARCHITECT.

AutoCAD SHX Text

A. NOT USED

AutoCAD SHX Text

2.5 GC SHALL DEMOLISH EXISTING PARTITION AND VARIOUS OTHER

AutoCAD SHX Text

ELEMENTS AS INDICATED ON PLAN AND COORDINATE THE REMOVAL OF ALL

AutoCAD SHX Text

RELATED ELECTRICAL SERVICE, PLUMBING AND ALL OTHER

AutoCAD SHX Text

APPURTENANCES INCLUDED THEREIN, REFER TO GENERAL DEMOLITION NOTES.

AutoCAD SHX Text

2.6 GC SHALL BE RESPONSIBLE FOR THE REMOVAL OF ALL CONSTRUCTION

AutoCAD SHX Text

DEBRIS AND FOR THE RETURN OF ANY BUILDING STANDARD COMPONENTS

AutoCAD SHX Text

IF REQUESTED BY THE BUILDING MANAGEMENT UNLESS OTHERWISE NOTED ON CD'S.

AutoCAD SHX Text

2.7 ALL CONVENTIONAL DRYWALL CONSTRUCTION, FURRING, SHEATHING,

AutoCAD SHX Text

THIS CONTRACT, SHALL BE AS DETAILED (REFER TO LEGEND ENTRIES, ON

AutoCAD SHX Text

CONSTRUCTION PLAN). DRYWALL JOINTS SHALL BE TAPED/SPACKLED

AutoCAD SHX Text

LEVEL. EXTERIOR CORNERS SHALL RECEIVE METAL CORNER

AutoCAD SHX Text

REINFORCING BEAD AND BE SPACKLED IN A CONVENTIONAL MANNER. NO

AutoCAD SHX Text

HORIZONTAL DRYWALL JOINTS SHALL BE ACCEPTED UNLESS APPROVED BY

AutoCAD SHX Text

ARCHITECT. BUTTED, UNTAPED DRYWALL JOINTS ARE NOT ACCEPTABLE.

AutoCAD SHX Text

FULL HEIGHT GYPSUM BOARD SHEETS SHALL BE USED THROUGHOUT FOR

AutoCAD SHX Text

FULL HEIGHT CONSTRUCTION.

AutoCAD SHX Text

A. NOT USED

AutoCAD SHX Text

B. NOT USED

AutoCAD SHX Text

1.13 THE GC SHALL VISIT THE JOB SITE AND VERIFY ALL CONDITIONS OF THE WORK PRIOR TO SUBMITTING A BID. GC TO VERIFY AND INCLUDE ANY MEANS & METHODS REQUIRED FOR THE SCOPE OF WORK THAT WILL LEAD TO SUCCESSFUL COMPLETION OF CONSTRUCTION.

AutoCAD SHX Text

1.14 EXISTING CONDITIONS INDICATED ON THE DRAWINGS ARE ASSUMED AND SHALL BE VERIFIED BY THE CONTRACTOR. THE CONTRACTOR SHALL VERIFY EXISTING DIMENSIONS, MATERIALS AND METHODS OF CONSTRUCTION AND COORDINATE WITH THE CONTRACT DOCUMENTS. THE CONTRACTOR SHALL NOTIFY THE ARCHITECT OF SIGNIFICANT DISCREPANCIES BETWEEN EXISTING CONDITIONS AND THE CONTRACT DOCUMENTS PRIOR TO COMMENCING WORK.

AutoCAD SHX Text

1.15 PERFORM ALL WORK IN COMPLIANCE WITH APPLICABLE LAWS, CODES, ORDINANCES, RESTRICTIONS AND REQUIREMENTS. WORK SHALL BE INSPECTED BY APPROPRIATE AGENCIES.

AutoCAD SHX Text

1.16 THE TERMS, PROVIDED AND INSTALL AS USED THROUGHOUT THE NOTES AND/OR CONTRACT DOCUMENTS IS DEFINED AS SUPPLY, INSTALL, FINISH AND TEST EACH ITEM AS APPLICABLE, UNLESS OTHERWISE NOTED.

AutoCAD SHX Text

1.30 OBTAIN AND PAY FOR PERMITS AND INSPECTIONS REQUIRED BY PUBLIC

AutoCAD SHX Text

AUTHORITIES GOVERNING THE WORK.

AutoCAD SHX Text

1.31 REVIEW DOCUMENTS, VERIFY DIMENSIONS AND FIELD CONDITIONS AND

AutoCAD SHX Text

CONFIRM THAT WORK IS BUILDABLE AS SHOWN. REPORT ANY CONFLICTS OR

AutoCAD SHX Text

OMISSIONS TO THE ARCHITECT FOR CLARIFICATION PRIOR TO PERFORMING ANY

AutoCAD SHX Text

WORK IN QUESTION.

AutoCAD SHX Text

CONFLICT, CONSULT THE ARCHITECT.

AutoCAD SHX Text

OR MOUNTED TO WALLS OR CEILINGS.

AutoCAD SHX Text

OTHERWISE NOTED.

AutoCAD SHX Text

THICKNESS OF FINISHES.

AutoCAD SHX Text

INSTALLATIONS.

AutoCAD SHX Text

OF NOT MORE THAN 450.

AutoCAD SHX Text

ACCORDANCE WITH ASTM-E 84.

AutoCAD SHX Text

1.39 UNDERCUT DOORS TO CLEAR TOP OF FLOOR FINISHES BY 1/4 INCH, UNLESS

AutoCAD SHX Text

1.38 COORDINATE AND PROVIDE BLOCKING FOR MILLWORK AND ITEMS ATTACHED

AutoCAD SHX Text

OTHERWISE NOTED. MAINTAIN DIMENSIONS MARKED "HOLD". ALLOW FOR

AutoCAD SHX Text

1.37 PARTITIONS ARE DIMENSIONED FROM FINISH FACE TO FINISH FACE, UNLESS

AutoCAD SHX Text

1.36 DO NOT SCALE DRAWINGS. WRITTEN DIMENSIONS GOVERN. IN CASE OF

AutoCAD SHX Text

SCHEDULE AND COORDINATE TO ASSURE ORDERLY SEQUENCE OF INSTALLATION

AutoCAD SHX Text

CONTRACT. INCLUDE SCHEDULE REQUIREMENTS IN CONSTRUCTION PROGRESS

AutoCAD SHX Text

1.33 OWNER WILL PROVIDE WORK NOTED "BY OTHERS" OR "NIC" UNDER SEPARATE

AutoCAD SHX Text

ARCHITECT FOR REVIEW PRIOR TO PURCHASE, FABRICATION OR INSTALLATION.

AutoCAD SHX Text

1.35 PROTECT AREA OF WORK AND ADJACENT AREAS FROM DAMAGE.

AutoCAD SHX Text

1.34 COORDINATE TELECOMMUNICATIONS, DATA AND SECURITY SYSTEM

AutoCAD SHX Text

1.32 SUBMIT REQUESTS FOR SUBSTITUTIONS, REVISIONS, OR CHANGES TO

AutoCAD SHX Text

1.40 CONCEALED INSULATING MATERIALS INSTALLED WITHIN WALL SHALL HAVE A

AutoCAD SHX Text

FLAME SPREAD INDEX OF NOT MORE THAN 25 AND A SMOKE-DEVELOPED INDEX

AutoCAD SHX Text

POTENTIAL FIRE ON THE INSIDE OF THE BUILDING DUE TO INSTALLATION IN

AutoCAD SHX Text

1.41 INSULATING MATERIALS WHICH ARE SUBJECT TO DIRECT EXPOSURE TO

AutoCAD SHX Text

UNCONCEALED SPACES SHALL HAVE A FLAME SPREAD INDEX OF NOT MORE

AutoCAD SHX Text

THAN 25 AND A SMOKE-DEVELOPED INDEX OF NOT MORE THAN 450.

AutoCAD SHX Text

25 AND A SMOKE-DEVELOPED INDEX OF NOT MORE THAN 450 AS DETERMINED IN

AutoCAD SHX Text

1.42 MATERIALS EXPOSED WITHIN PLENUMS ARE REQUIRED TO BE

AutoCAD SHX Text

NON COMBUSTIBLE OR SHALL HAVE A FLAME SPREAD INDEX OF NOT MORE THAN

AutoCAD SHX Text

2.1 PRIOR TO START OF CONSTRUCTION, GC SHALL COORDINATE SCHEDULING OF MEETINGS WITH HIS PROJECT PERSONNEL, THE OWNER'S REP(S). ARCHITECT PROJECT MANAGER, OTHERS, FOR REVIEW OF PROJECT SCOPE, DESIGN INTENT, CONSTRUCTION QUALITY EXPECTED, MEANS AND METHODS & FINAL DISCUSION OF DRAWINGS/DETAILS/QUESTIONS.

AutoCAD SHX Text

2.2 DIMENSIONS ON DRAWINGS ARE FINISH FACE TO FINISH FACE OF

AutoCAD SHX Text

PARTITIONS, COLUMNS, ETC., OR TO WHERE SHOWN, UNLESS OTHERWISE

AutoCAD SHX Text

NOTED. DO NOT SCALE DRAWINGS, WRITTEN DIMENSIONS TAKE

AutoCAD SHX Text

PRECEDENCE OVER GRAPHIC REPRESENTATION. DETAIL DIMENSIONS

AutoCAD SHX Text

TAKE PRECEDENCE OVER PLAN DIMENSION.

AutoCAD SHX Text

2.8 ALL EXISTING HOLES/CRACKS IN SLAB AND THOSE RESULTING FROM

AutoCAD SHX Text

THE CONSTRUCTION PROCESS SHALL BE FILLED/REPAIRED AND THE

AutoCAD SHX Text

SURFACE PATCHED SMOOTH AND LEVEL WITH ADJACENT FLOOR

AutoCAD SHX Text

SURFACE, IN A MANNER ACCEPTABLE TO THE ARCHITECT.

AutoCAD SHX Text

2.9 ALL NECESSARY WOOD BLOCKING/GROUNDS, ETC., ARE TO BE

AutoCAD SHX Text

SUPPLIED AS FACTORY TREATED FIRE-PROOFED ELEMENTS. GC SHALL

AutoCAD SHX Text

FULLY COORDINATE SETTING/PLACEMENT OF THESE ELEMENTS AS REQ'D

AutoCAD SHX Text

BY LOCAL CODE/BUILDING OR SURROUNDING CONSTRUCTION CONDITIONS.

AutoCAD SHX Text

A. GROUNDS/BLOCKING MAY NOT BE WHOLLY SHOWN ON DRAWINGS

AutoCAD SHX Text

AND GOOD CONSTRUCTION PRACTICE SHALL GOVERN/ DETERMINE

AutoCAD SHX Text

SAID USE WHERE A QUESTION ARISES.

AutoCAD SHX Text

B. NOT USED

AutoCAD SHX Text

C. NOT USED

AutoCAD SHX Text

2.10 GC SHALL PROVIDE GENERAL CARPENTRY AS REQUIRED FOR WORK

AutoCAD SHX Text

WHICH MAY NOT FALL INTO JURISDICTION OF A SPECIFIC TRADE, BUT IS

AutoCAD SHX Text

REQUIRED FOR PROPER JOB EXECUTION AND COMPLETION OF

AutoCAD SHX Text

CONSTRUCTION.

AutoCAD SHX Text

2.11 NOT USED

AutoCAD SHX Text

2.12 NOT USED

AutoCAD SHX Text

2.13 GC, SUBCONTRACTORS, AND ALL VENDORS ARE TO VERIFY ALL

AutoCAD SHX Text

CLEARANCES (CORRIDORS, STAIRS, ELEVATORS, ETC.) REQUIRED FOR

AutoCAD SHX Text

DELIVERIES AND PASSAGE OF ALL JOB MATERIALS/EQUIPMENT PER

AutoCAD SHX Text

LANDLORD'S RULES & REGULATIONS.

AutoCAD SHX Text

A. GC SHALL SCHEDULE FOR AND INCLUDE COSTS/ FEES

AutoCAD SHX Text

NECESSARY FOR USE OF BUILDING ELEVATOR OR ANY SPECIAL

AutoCAD SHX Text

CARTAGE, RIGGING, HOISTING, DELIVERIES, TRANSPORTATION,

AutoCAD SHX Text

CONNECTED WITH CONTRACT WORK.

AutoCAD SHX Text

B. GC SHALL COORDINATE CLOSELY WITH VARIOUS ARCHITECT

AutoCAD SHX Text

VENDORS OR CONTRACTORS, REGARDING INFORMATION IN PART

AutoCAD SHX Text

"A" NOTE ABOVE.

AutoCAD SHX Text

2.14 EXISTING FINISHES IN ANY AREA OF THIS PROJECT SHALL BE

AutoCAD SHX Text

PATCHED AND SPACKLED AS REQUIRED IF DAMAGED IN ANY MANNER

AutoCAD SHX Text

DURING CONSTRUCTION AND SHOULD BE REPAIRED TO SATISFACTION

AutoCAD SHX Text

OF ARCHITECT & THE BUILDING LANDLORD.

AutoCAD SHX Text

2.15 HARDWARE SHALL BE PROVIDED BY GC AS SPECIFIED. SEE DOOR FRAME AND HARDWARE SCHEDULES.

AutoCAD SHX Text

2.16 ALL SUBSTITUTIONS, I.E., "EQUALS" MUST BE SUBMITTED TO ARCHITECT/OC PROJECT MANAGER FOR WRITTEN APPROVAL PRIOR TO SUBSTITUTION.

AutoCAD SHX Text

2.17 GC SHALL REMOVE EXISTING FLOOR COVERING WHENEVER

AutoCAD SHX Text

DESIGNATED FOR REMOVAL.

AutoCAD SHX Text

2.18 NOT USED

AutoCAD SHX Text

2.19 NOT USED

AutoCAD SHX Text

2.20 NOT USED

AutoCAD SHX Text

3.4 CEILING PLANE SHALL BE LEVEL AND TRUE, AND IN ALIGNMENT WITH ALL LIGHTING, SPRINKLERS, HVAC AND OTHER ELEMENTS INCORPORATED IN ITS CONSTRUCTION. GRID SHALL BE CONTINUOUS THROUGHOUT THE DEMISED AREA EXCEPT WHERE NOTED ON CDs. 3.5 NOT USED 3.6 NOT USED 3.7 MECHANICAL, HVAC AND PLUMBING ELEMENTS SHALL AT NO TIME COME IN CONTACT WITH CEILING CONSTRUCTION EXCEPT AS NECESSARY PENETRATIONS MAY REQUIRE. 3.8 ACCESS SHALL BE PROVIDED BY GC AS REQUIRED FOR INSTALLATION AND MAINTENANCE OF MECHANICAL, ELECTRICAL AND OTHER ELEMENTS WITHIN CEILING PLENUM AND AS REQUIRED BY CODE. LOCATIONS FOR SPECIAL ACCESS DOORS, HATCHES, ETC. SHALL BE COORDINATED WITH OTHER TRADES AND APPROVED BY ARCHITECT. AS- BUILT REFERENCE PLANS SHALL BE PROVIDED TO ARCHITECT. 3.9 INSPECTIONS, AS REQUIRED BY LOCAL AUTHORITIES SHALL BE COORDINATED BY GC PRIOR TO CLOSING OF CEILING. 3.10 SHOP DRAWINGS FOR ALL RELATED TRADES (PLUMBING, SPRINKLER, HVAC) SHALL BE SUBMITTED TO ARCHITECT FOR REVIEW/APPROVAL PRIOR TO MANUFACTURING AND INSTALLATION. A COORDINATED SHOP DRAWING FOR ALL VISIBLE CEILING ELEMENTS SHALL BE SUBMITTED.

AutoCAD SHX Text

3.11 HVAC SUPPLY, RETURN, EXHAUST GRILLES SHALL BE AS SPECIFIED IN MECHANICAL AND ARCHITECTURAL DRAWINGS. ALL HVAC ELEMENTS SHALL BE BRITE WHITE (TO MATCH CEILING) INSTALLED FLUSH AND TRUE AND CENTERED WITHIN THE CEILING GRID. LOCATIONS SHALL BE PER APPROVED MECHANICAL PLANS, UNLESS OTHERWISE NOTED ON CD'S.

AutoCAD SHX Text

3.12 ARCHITECTURAL CEILING PLAN SHALL GOVERN WITH RESPECT TO LOCATIONS FOR CEILING PENETRATIONS AS AESTHETIC AND FUNCTIONAL CONSIDERATIONS DICTATE. MECHANICAL DOCUMENTS SHALL TAKE PRECEDENCE WITH RESPECT TO OVERALL SCOPE OF WORK.

AutoCAD SHX Text

3.13 CLEARANCES FOR ALL RELATED CEILING PLENUM THAN ONE ROOM, SHALL BE ACOUSTICALLY LINED NO ADDITIONAL COST.

AutoCAD SHX Text

3.14 NOT USED

AutoCAD SHX Text

3.15 NOT USED

AutoCAD SHX Text

1.21 ALL NEW MATERIALS AND FINISHES SHALL MATCH EXISTING UNLESS SPECIFIED OTHERWISE, SEE OWNER AND/OR ARCHITECT FOR APPROVAL OF ALTERNATIVES.

AutoCAD SHX Text ALBERT JOSEPH COOPER III AR-0010460 STATE OF FLORIDA REGISTRATION NUMBER AA-C001315

AutoCAD SHX Text

AS SHOWED

AutoCAD SHX Text 18268

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

AJC

AutoCAD SHX Text

AJC

AutoCAD SHX Text

AJC

AutoCAD SHX Text

AutoCAD SHX Text

AJC

AutoCAD SHX Text

BID/PERMIT ISSUE SET 2

AutoCAD SHX Text 05/04/2022

AutoCAD SHX Text

AutoCAD SHX Text

NRA

AutoCAD SHX Text

BID/PERMIT ISSUE SET

AutoCAD SHX Text 11/11/19

AutoCAD SHX Text

AutoCAD SHX Text

NRA

AutoCAD SHX Text

90% CD'S

AutoCAD SHX Text 09/26/19

AutoCAD SHX Text

AJC

AutoCAD SHX Text

NRA

AutoCAD SHX Text

60% CD'S

AutoCAD SHX Text 08/01/19

AutoCAD SHX Text

AutoCAD SHX Text

RE-BID / PERMIT ISSUE SET 2

AutoCAD SHX Text 05/04/2022

AutoCAD SHX Text

NRA

AutoCAD SHX Text

AJC

AutoCAD SHX Text

CONSTRUCTION AIR CONDITIONING FILTERS.

AutoCAD SHX Text

1.11 COORDINATE WITH ENGINEERING DRAWINGS FOR PLACEMENT OF

REFLECTED CLG & MECH. SYS (CONT.)

4.0 ELECTRICAL PLAN NOTES

ELECTRICAL PLAN NOTES (CONT.)

Consultant ● Seal/Signature

Sheet Title:

Project Number

Scale

File Name

Drawn By

Checked ByAR

CH

ITE

CT

UR

E

PL

AN

NI

NG

IN

TE

RI

OR

D

ES

IG

N

SP

AC

E

PL

AN

NI

NG

Issue Date

Project Status

PR

IN

TE

D

ON

Client Information

ADCARCHITECTURAL DESIGN COLLABORATIVE

Architect ● Seal/Signature

Issue

Project Documents for:

Date Issue Description

Project:

Check By

945 N. PENNSYLVANIA AVENUE

WINTER PARK, FLORIDA 32789

OFFICE: (407) 629-1188

FAX: (407) 388-1220

WWW. ADCINTERNATIONAL.NET

6.0 FINISH PLAN NOTES

7.0 NOT USED

8.0 GENERAL DEMOLITION NOTES

5.0 NOT USED

FINISH PLAN NOTES (CONT.) GEN DEMOLITION NOTES (CONT.)

Ocoee Security

SECURITY UPGRADE

OCOEE, FL 34761

475 STORY RD #15

ORANGE COUNTY

A00.11

RE-BID / PERMIT ISSUE SET 2

05/04/2022

AutoCAD SHX Text

5.1 NOT USED 5.2 NOT USED 5.3 NOT USED 5.4 NOT USED 5.5 NOT USED

AutoCAD SHX Text

4.12 FLOOR OUTLETS SHALL BE FLUSH TYPE UNLESS PROHIBITED BY BUILDING MANAGEMENT. GC SHALL FURNISH CUT /SAMPLE TO ARCHITECT FOR APPROVAL. UNDER CARPET WIRING MAY NOT BE USED EXCEPT AS SPECIFIED AND AS LOCAL CODES AND BUILDING MANAGEMENT PERMITS. 4.13 SURFACE MOUNTED WIRING DEVICES SHALL NOT BE USED BY GC, HIS SUBS OR ANY ELECTRICAL VENDOR OR INSTALLER, EXCEPT AS SPECIFIED TO COORDINATE WITH FURNITURE/MILLWORK INSTALLATION. 4.14 COORDINATION OF ELECTRICAL WORK WITH HVAC, CABINET WORK, CARPENTRY, FURNITURE, SHALL BE ASSURED BY GC. 4.15 NOT USED 4.16 AVAILABILITY OF ADEQUATE POWER SERVICE SHALL BE VERIFIED BY ELECTRICAL CONTRACTOR. COSTS FOR ADDITIONAL CIRCUIT PANELS, ETC., IF REQUIRED, SHALL BE INCLUDED IN BASE BID. 4.18 EXISTING SIGNAL CABLES, IF IN USE BY RESIDING TENANTS, MAY NOT BE DISTURBED OR CUT. GC SHALL BE RESPONSIBLE TO RESTORE ANY SERVICES WHICH ARE INADVERTENTLY INTERRUPTED. 4.19 REFER TO SCOPE OF MECHANICAL AND HVAC INSTALLATIONS FOR RELATED ELECTRICAL WORK TO BE INCLUDED. 4.20 SLEEVES SHALL BE PROVIDED BY GC TO ALLOW DATA / TELEPHONE CABLES TO PASS THROUGH FIRE RATED PARTITIONS AND SHALL BE FIRESTOPPED BY G.C.

AutoCAD SHX Text

3.17 FIRE PROTECTION SYSTEMS AS SPECIFIED OR REQUIRED BY CODE,

AutoCAD SHX Text

SHALL BE PROVIDED BY GC. MINIMUM SPRINKLER INSTALLATION MUST MEET

AutoCAD SHX Text

REQUIREMENTS OF NFPA 13. TILE TO PROVIDE A UNIFIED, CONSISTENT AND

AutoCAD SHX Text

AESTHETIC ARRANGEMENT. HEADS SHALL BE WHITE FLUSH TYPE OR

AutoCAD SHX Text

BUILDING STANDARD IF EQUAL OR BETTER.

AutoCAD SHX Text

3.18 SPRINKLER HEAD LOCATION SHALL BE COORDINATED WITH OTHER

AutoCAD SHX Text

TRADES BY GC AND SHALL BE AS SPECIFIED BY ENGINEER OR AS REQ'D BY

AutoCAD SHX Text

CODE. SPRINKLERS SHALL BE CENTERED WITHIN EACH CEILING.

AutoCAD SHX Text

3.19 ARCHITECTURAL PLAN SHALL GOVERN LOCATION AND ENGINEERING PLANS SHALL PREVAIL IN QUESTIONS OF CIRCUITING AND SCOPE.

AutoCAD SHX Text

3.20 CUT SHEETS FOR ALL FIXTURES SHALL BE SUBMITTED TO THE

AutoCAD SHX Text

ARCHITECT BY GC FOR REVIEW/APPROVAL. SUBSTITUTIONS MUST BE

AutoCAD SHX Text

APPROVED BY ARCHITECT.

AutoCAD SHX Text

3.21 EMERGENCY LIGHTING AND ANNUNCIATOR / ALARM SYSTEMS SHALL BE

AutoCAD SHX Text

SPECIFIED BY ENGINEER.

AutoCAD SHX Text

3.22 NEW SWITCHES PER SPECIFICATION.

AutoCAD SHX Text

3.23 ELECTRICAL WORK SHALL BE PERFORMED IN ACCORDANCE WITH THE

AutoCAD SHX Text

LATEST "NATIONAL ELECTRICAL CODE" AND ANY AND ALL APPLICABLE STATE

AutoCAD SHX Text

AND LOCAL CODES/ORDINANCES.

AutoCAD SHX Text

3.24 CLEANING-BEFORE JOB COMPLETION, THE FOLLOWING SHALL BE

AutoCAD SHX Text

SATISFIED:

AutoCAD SHX Text

A. ALL LIGHT FIXTURE INTERIORS AND LENSES SHALL BE WIPED

AutoCAD SHX Text

CLEAN OF ALL CONSTRUCTION DUST, GRIME, FINGERMARKS, ETC.,

AutoCAD SHX Text

AND BE FULLY FUNCTIONING, MECHANICALLY AND ELECTRICALLY.

AutoCAD SHX Text

B. ALL LAMPING WILL BE NEW AND FUNCTIONAL.

AutoCAD SHX Text

3.25 PROTECTION: ALL ELECTRICAL ELEMENTS, WHEN INSTALLED, SHALL BE

AutoCAD SHX Text

PROTECTED FROM DAMAGE BY OTHER TRADES. COVER PLATES SHALL BE

AutoCAD SHX Text

INSTALLED AFTER FINISH MATERIALS HAVE BEEN APPLIED.

AutoCAD SHX Text

3.26 NOT USED

AutoCAD SHX Text

3.27 SEE REFLECTED CEILING PLAN FOR LAYOUT OF CEILING AND FIXTURES.

AutoCAD SHX Text

3.28 LOCATE REGISTERS AND LIGHTING FIXTURES WITHIN GRID LINES. CENTER

AutoCAD SHX Text

SPRINKLER HEADS, SPEAKERS, RECESSED FIXTURES, AND SIMILAR CEILING

AutoCAD SHX Text

ELEMENTS IN ACOUSTICAL UNITS, UNLESS OTHERWISE NOTED.

AutoCAD SHX Text

3.29 LOCATIONS OF FIXTURES, REGISTERS, SWITCHES, ETC. SHALL BE SUBMITTED TO ARCHITECT FOR REVIEW PRIOR TO COMMENCING CONSTRUCTION. REFER TO MEP DRAWINGS, FIRE PROTECTION DRAWINGS, AND PROJECT MANUAL FOR DESIGN OF THESE SYSTEMS.

AutoCAD SHX Text

3.30 ALL FIXTURES TO BE PER ELECTRICAL DRAWINGS.

AutoCAD SHX Text

4.1 SCOPE: GC SHALL PROVIDE ALL ELECTRICAL WORK AS SHOWN OR IMPLIED IN THESE DRAWINGS AND RELATED ENGINEERING DRAWINGS (IF ANY) INCLUDING ALL CONDUIT RUNS FOR POWER AND SIGNAL. DRAG LINES, PULL BOXES, WIRING, RECEPTACLES AND SWITCHING DEVICE, CORE DRILLING AND PATCHING, ETC.; AS SPECIFIED OR IMPLIED OR AS REQUIRED BY CODE OR BUILDING STANDARDS. 4.2 EQUIPMENT: TELEPHONE AND DATA EQUIPMENT, TERMINALS, ETC., EXCEPT AS SPECIFICALLY CALLED FOR, SHALL BE PROVIDED BY OTHERS. GC SHALL PROVIDE FOR COORDINATION WITH VENDORS/INSTALLERS REGARDING DELIVERIES AND SCHEDULES AS DIRECTED BY ARCHITECT. 4.3 LOCATIONS AND DIMENSIONS SHALL BE PER ARCHITECTURAL DRAWINGS. ENGINEERING DOCUMENTS (IF ANY) SHALL PREVAIL IN CASE OF VARIATION IN SPECIFICATIONS. DISCREPANCIES MUST BE BROUGHT TO THE ATTENTION OF ARCHITECT BEFORE START OF WORK. FURNITURE INDICATED ON PLANS IS FOR REFERENCE ONLY. 4.4 VARIATIONS FROM WORK SPECIFIED, DUE TO AVAILABILITY OF MATERIALS; FIELD CONDITIONS, VARIATIONS IN EQUIPMENT SPECS, ETC., MAY BE MADE WITH THE APPROVAL OF ARCHITECT. 4.5 FIELD VERIFICATIONS: G.C. AND SUBCONTRACTORS SHALL BE RESPONSIBLE TO VERIFY FIELD CONDITIONS AND DIMENSIONS BEFORE BEGINNING WORK. SIZES OF CONDUITS AND PULL BOXES SHALL BE ADEQUATE FOR CABLES /SERVICE SPECIFIED. 4.6 NOT USED 4.7 COMPLIANCE: ALL WORK SHALL BE PERFORMED IN COMPLETE COMPLIANCE WITH THE NATIONAL ELECTRICAL CODE AND ALL STATE OR LOCAL CODES AND ORDINANCES HAVING JURISDICTION. 4.8 FLUSH MOUNTED FLOOR P/C BOX. COORDINATE WITH ELECTRICAL DRAWINGS. GC SHALL RETAIN THE SERVICES OF A TESTING AGENCY TO FIELD VERIFY IF EXISTING CONCRETE SLAB IS POST TENSION & TO LOCATE THE EXISTING POST-TENSION TENDONS PRIOR TO PENETRATING THE EXISTING SLAB TO AVOID DAMAGING THE EXISTING TENDONS. THE TENDONS SHALL BE LOCATED BY A MEANS OF A HILTI FERROSCAN DEVICE OR APPROVED EQUAL. THE RESULTS SHALL BE SUBMITTED TO THE ARCHITECT FOR REVIEW A MINIMUM OF 48 HOURS PRIOR TO PENETRATING THE EXISTING SLAB. CONTRACTOR TO NOTIFY ARCHITECT IN WRITING IF LOCATION OF FLOOR BOX SPECIFIED INTERFERES WITH EXISTING TENDONS.

AutoCAD SHX Text

4.9 COMPATIBILITY: ALL DEVICES, WIRING, ETC. SHALL BE COMPATIBLE, EACH WITH ONE ANOTHER AND WITH EXISTING WORK AND BUILDING STANDARDS. 4.10 CIRCUITING SHALL BE AS SHOWN ON ENGINEERING DOCUMENTS. 4.11 PROTECTION: ALL ELECTRICAL DEVICES, WHEN INSTALLED, SHALL BE PROTECTED FROM DAMAGE BY OTHER TRADES. COVER PLATES SHALL BE INSTALLED AFTER FINISH MATERIALS HAVE BEEN APPLIED. SEE FINISH PLAN.

AutoCAD SHX Text

PER ELECTRICAL DRAWINGS.

AutoCAD SHX Text

4.28 IDENTIFY DEDICATED OR ISOLATED GROUND ELECTRICAL OUTLETS WITH A RED DOT

AutoCAD SHX Text

ONE-PIECE TYPE GANG COVER PLATES, UNLESS OTHERWISE NOTED.

AutoCAD SHX Text

4.27 PROVIDE MATCHING COVER PLATES, RECEPTACLES AND RELATED ITEMS. PROVIDE

AutoCAD SHX Text

DO NOT INSTALL BACK-TO-BACK.

AutoCAD SHX Text

4.26 INSTALL OUTLETS ON OPPOSITE SIDES OF PARTITIONS IN SEPARATE STUD CAVITIES.

AutoCAD SHX Text

CLUSTER OF OUTLETS OR SWITCHES, UNLESS OTHERWISE NOTED.

AutoCAD SHX Text

4.25 INDICATED DIMENSIONS ARE TO THE CENTER LINE OF OUTLET OR SWITCH, OR

AutoCAD SHX Text

4.24 GANG ADJACENT LIGHT SWITCHES AND COVER WITH A SINGLE PLATE.

AutoCAD SHX Text

EQUIPMENT.

AutoCAD SHX Text

4.23 VERIFY MOUNTING REQUIREMENTS OF ELECTRICAL, TELEPHONE AND OTHER

AutoCAD SHX Text

WITH MANUFACTURER TO ENSURE PROPER FIT AND FUNCTION.

AutoCAD SHX Text

4.22 VERIFY EQUIPMENT SPECIFICATIONS, POWER AND INSTALLATION REQUIREMENTS

AutoCAD SHX Text

SYSTEMS.

AutoCAD SHX Text

4.21 COORDINATE INSTALLATION OF TELECOMMUNICATIONS, DATA AND SECURITY

AutoCAD SHX Text ALBERT JOSEPH COOPER III AR-0010460 STATE OF FLORIDA REGISTRATION NUMBER AA-C001315

AutoCAD SHX Text

6.1 ALL FINISH MATERIAL INDICATED TO BE BY GC UNLESS OTHERWISE NOTED IN FINISH SCHEDULES, FINISH PLAN AND SPECIFICATIONS 6.2 GC AND VENDORS SHALL DETERMINE AVAILABILITY OF ALL FINISH MATERIALS. ANY DELIVERY SCHEDULE THAT POTENTIALLY MAY CAUSE COORDINATION PROBLEMS DURING THE FINAL STAGES OF CONSTRUCTION/INSTALLATION SHALL BE BROUGHT TO THE ATTENTION OF THE ARCHITECT , EARLY ON, FOR POSSIBLE RE-EVALUATION OF MATERIAL DESIGNATION. 6.3 NOT USED 6.4 PAINT FOR WALL FINISHES SHALL BE PROVIDED AS A THREE (3) COAT EGGSHELL LATEX ENAMEL PAINT INSTALLATION [ONE (1) PRIME AND TWO (2) FINISHED COAT], COLORS AS SPECIFIED. METAL ELEMENTS AND DOOR FRAMES SHALL HAVE A THREE COAT SEMI-GLOSS ALKYD ENAMEL FINISH TO MATCH EXISTING. 6.5 NOT USED 6.6 UPON COMPLETION OF CONSTRUCTION, GC SHALL REMOVE ALL PAINT, WALLCOVERING PASTE, ETC., FROM WHERE IT HAS SPILLED, SPLASHED, OR SPATTERED. 6.7 NOT USED 6.8 PROVIDE STRAIGHT, FLUSH RESILIENT BASE AT CARPETED AREAS, AND COVED. TOP SET RESILIENT BASE AT RESILIENT FLOORING, UNLESS OTHERWISE NOTED.

AutoCAD SHX Text

8.21 PROVIDE PROTECTION OF INTERIOR FINISHES DURING DEMOLITIONS/CONSTRUCTION.

AutoCAD SHX Text

REFER TO LANDLORD'S RULES AND REGULATIONS.

AutoCAD SHX Text

8.22 GC TO MAINTAIN ACCESS THROUGH LOADING DOCK AT ALL TIMES. VERIFY WITH BUILDING

AutoCAD SHX Text

MANAGEMENT THE NUMBER OF VEHICLES AND/OR DUMPSTERS PERMITTED IN THE LOADING DOCK

AutoCAD SHX Text

AREA AT ONE TIME. LOADING DOCK AREA REFERS TO AREA OUTSIDE OF THE BAYS.

AutoCAD SHX Text

8.23 THE GENERAL CONTRACTOR (GC) SHALL COORDINATE ALL RECYCLING AND ALL DISPOSAL OF

AutoCAD SHX Text

ALL DEMOLISHED MATERIAL AND EQUIPMENT WITH THE CONSTRUCTION AND DEMOLITION WASTE

AutoCAD SHX Text

MANAGEMENT PLAN AND COMPANY PRIOR TO REMOVAL AND DEMOLITION

AutoCAD SHX Text

OF MATERIALS AND EQUIPMENT.

AutoCAD SHX Text

8.24 REMOVE CEILING, SOFFIT, BULKHEAD, MISC. ASSEMBLIES SHOWN DASHED, INCLUDING BUT NOT

AutoCAD SHX Text

LIMITED TO SHEATHING, FINISHES, STUD FRAMING, FURRING, BLOCKING AND BRACING.

AutoCAD SHX Text

8.25 REMOVE EQUIPMENT AND ASSOCIATED EQUIPMENT INSTALLED IN OR MOUNTED TO FLOOR,

AutoCAD SHX Text

WALL, AND CEILING ASSEMBLIES SHOWN DASHED.

AutoCAD SHX Text

8.26 MAINTAIN THE CONTINUITY OF CONSTRUCTION OF ALL FIRE-RATED ASSEMBLIES (I.E.

AutoCAD SHX Text

DOORS, GYPSUM ENCLOSURES, SPRAYED FIRE PROOFING, ETC) AT ALL EXISTING AND NEW

AutoCAD SHX Text LOCATIONS INCLUDING BUT NOT LIMITED TO STRUCTURAL COLUMNS, BEAMS, AND FLOOR SLAB.

AutoCAD SHX Text

8.27 COORDINATE ALL SHUTDOWNS IN UTILITY SERVICE WITH OWNER PRIOR TO PERFORMING

AutoCAD SHX Text

SHUTDOWNS IN UTILITY SERVICE.

AutoCAD SHX Text

8.1 REMOVE EXISTING RECEPTACLES, TELEPHONE, SWITCHES, AND ANY ELECTRICAL DEVICES IN WALLS TO BE DEMOLISHED. RELOCATE ANY OF THESE DEVICES AS INDICATED OR REQUIRED BY THE DRAWINGS, ARCHITECT, OR OWNER REPRESENTATIVE. PROVIDE ARCHITECT WITH AS-BUILT DRAWINGS OF FINAL INSTALLATION FOR RECORD PURPOSES. CONTRACTOR IS NOTIFIED THAT NOT ALL EXISTING DEVICES MAY HAVE BEEN INDICATED ON THE DRAWINGS AND THAT SOME EXISTING ELECTRICAL DEVICES MAY NOT HAVE BEEN SHOWN IN THEIR ACTUAL LOCATION. CONTRACTOR IS REQUIRED TO VISIT SITE AND BECOME FAMILIAR WITH THE EXISTING CONDITIONS PRIOR TO DETERMINING THE WORK THAT NEEDS TO BE ACCOMPLISHED AS PART OF HIS/HER BID. 8.2 THE WORK SHALL INCLUDE THE FURNISHING OF ALL MATERIALS, CUTTING, EXTENDING, CONNECTING, REPAIRING, ADAPTING, AND OTHER WORK COINCIDENTAL HERETO. TOGETHER WITH SUCH TEMPORARY INSTALLATIONS AS MAY BE NECESSARY TO SATISFY THE DEMOLITION PROGRAM. APPROVAL SHALL BE SECURED FROM THE LANDLORD/ ARCHITECT PRIOR TO CUTTING/DRILLING ANY STRUCTURAL SUPPORT. 8.3 ALL BUILDING CONSTRUCTION AFFECTED BY THE REMOVAL, RELOCATION OR INSTALLATION OF ANY PIECE OF EQUIPMENT SHALL BE REPAIRED AND FINISHED AS REQUIRED TO MATCH EXISTING CONDITION OR AS DIRECTED BY THE ARCHITECTURAL DRAWINGS, SPECIFICATIONS, OR OWNER'S REPRESENTATIVE.

AutoCAD SHX Text

8.14 WHERE EXISTING WORK IS DAMAGED IN THE EXECUTION OF THIS CONTRACT, OR WHERE OPENINGS ARE LEFT DUE TO THE REMOVAL OF PIPES, EQUIPMENT OR APPARATUS, THE SAME SHALL BE REPAIRED OR CLOSED UP TO CORRESPOND IN MATERIAL, QUALITY, SHAPE AND FINISH WITH THAT OF SIMILAR AND ADJOINING WORK, UNLESS OTHERWISE CALLED FOR. WHERE DAMAGE IS UNREPAIRABLE, NEW ITEMS OR EQUIPMENT SHALL BE PROVIDED. CONTRACTOR SHALL PROVIDE ALL NECESSARY WATERPROOFING, FIRE STOPPING AND SEALING OF PENETRATIONS LEFT FROM REMOVED EQUIPMENT OR PRODUCED BY THIS SCOPE OF WORK. 8.15 INTERRUPTION OF EXISTING SERVICES AND/OR OPERATION OF FACILITIES SHALL BE KEPT TO A MINIMUM.