Well ID Tag Specs - for quotes.docx
DOCX document 20 KB Posted
- Attached to
- Metal Well Tags
- Solicitation number
- S-69000-00001449
- Issued by
- Marion County, Oregon
About this file
The document provides the specifications for stainless steel well identification tags required by the Oregon Water Resources Department (OWRD) for a state and local contract opportunity involving Marion County and the City of Salem. The tags must be 1-7/8" tall by 3-3/8" wide, with a thickness of approximately 1/32", and have one vertical slot on each end measuring 1/8" x 7/8". The tags must be stamped with specific information and have a black paint-filled treatment. The tags are to be packaged in groups of 50-100 and shipped in boxes of no more than 500 tags, with stickers or hand-printed numbering on the outside of each shipping container.
The related state and local contract opportunity covers the provision of these metal well tags for the jurisdictions of Marion County and the City of Salem. OWRD reserves the right to extend the initial contract by amendment. The document does not provide details on pricing terms, set-asides, incumbents, funding requirements, or other salient information.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Well ID Tag Specs - for quotes - Corrected I.docx | DOCX document | |
| standard_gateMHNF Drawings.pdf | ||
| well-ID-Tag-SAMPLE.pdf | ||
| SSDetReq_ S-47100-00001450.doc | DOC document | |
| skimmer detail.jpg | JPG image |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Well Construction and Compliance (WCC)
Well ID Tag Specs:
Stainless Steel plates suitable for permanent attachment to water wells using a metal strap, such as a hose clamp Dimensions: 1 – 7/8” tall x 3 – 3/8” wide, approx. 1/32” thick One vertical slot on each end measuring 1/8” x 7/8”, positioned 5/16’ from the center of the slot to the edge of tag, and centered between top to bottom of tag.
Tag and slots all have rounded corners.
Each stamped with the following:
OREGON
WATER RESOURCES DEPT
WELL #
L (serial no.)
DO NOT REMOVE LABEL
Stamp lettering: all caps, align centered, in a plain typeface that looks like Arial or Calibri font on a computer.
The “L (serial no.)” should be proportional, but most prominent compared with the rest of the stamped info.
Black paint filled treatment (dipped in black paint but wiped off so it only remains in the stamped lines)
Packaging and shipping:
Packaged in groups of 50-100, secured for shipping with baling wire.
Preferably shipped in boxes of no more than 500 tags each.
Stickers or hand-printed numbering on the outside of individual shipping boxes and packages, to show which part of serial numbers are contained within.
OWRD reserves the right to extend the initial contract by amendment to the initial contract.
File details come from the government source that posted it. Updated .