Salient Characteristics OMAX MAXIEM 1530 PRO.rtf
RTF text file 61 KB Posted
- Attached to
- Water Jet Federal contract opportunity
- Solicitation number
- waterjet2024
About this file
This document outlines the salient characteristics for an OMAX MAXIEM 1530/M40 PRO JetCutting Center water jet system. The system includes a cutting table with 120" x 62" cutting area, 300 lbs per square foot load support, and linear accuracy of +/-0.003" across the cutting envelope. The package comes with a MAXIEM M4050V pump, MAXJET 5i Nozzle (.015"), basic start-up kit, toolbox, and 2200 lbs of garnet abrasive in 50 lb bags.
Key included features are factory assembly and testing, on-site assembly by a factory technician, one day of operational training, and free additional operator training in Kent, WA for up to one year (excluding travel expenses). The system includes a Continuous Feed Hopper with 600 lb garnet capacity, Water Recycling System with 5-ton chiller, IntelliMAX Standard Software, programmable Solids Removal System, and Water Level Control for submerged cutting. The equipment must include an IUID tag plate per MIL-STD-130x and is manufactured in Kent, WA USA. This appears to be part of a Request for Information (RFI) from the Department of the Army Materiel Command Contracting Command at Redstone Arsenal.
Text of this file
OMAX MAXIEM 1530/M40 PRO Salient Characteristics
MAXIEM JetCutting Center - Table 146" x 68" w/40 HP Pump Includes the following:
1. Waterjet Cutting Table
| 120” x 62” Cutting Area |
| 300 lbs. per square foot load support. |
| Linear Accuracy +/-0.003" over entire cutting envelope. |
| Mobile Control Station |
2. MAXIEM M4050V Pump
3. MAXJET 5i Nozzle .015"
4. Basic Start-Up Kit
5. Toolbox
6. A pallet containing 2200 lbs. of garnet abrasive will be supplied in 50 lb. bags.
7. Machine is fully assembled at the factory and tested prior to shipping.
8. A Factory Technician will arrive on site to assemble the components of the water jet.
9. The Factory Tech will start the machine to assure it's operation.
10. Immediately following start-up the technician will provide One (1) day of machine operation procedures.
11. Free additional operator training in Kent, WA for up to one year. Travel expenses are not included.
12. Machine and Software designed, manufactured and built in Kent, WA USA.
Continuous Feed Hopper (CFH) - Garnet Capacity 600lbs, capable of being filled without interruption of an ongoing cut, integrated metal pre filtration screen, and bulk bag/hopper ready.
Water Recycling System (WRS) with 5 ton Chiller, 2 CT, Single Pump
IntelliMAX Standard Software for Offline Use, Unlimited
Solids Removal System (1530 Only) - The programmable Solids Removal System provides precise control over abrasive evacuation rate, direction, and duration to efficiently remove garnet from the abrasive waterjet catcher tank. This system gives the operator the ability to program flow rate and direction. The controller’s programmability provides greater garnet removal than comparable fixed speed units. An optimized fluid return trough increases settling time and minimizes abrasive volume returning to the tank.
Water Level Control - Optional Rapid Water Level Control for quiet submerged cutting. For Maxiem 1530 models.
IUID tag plate per MIL-STD-130x
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Name Brand Justification OMAX Waterjet System (002).pdf | ||
| RFI OMAX Waterjet.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
File details come from the government source that posted it. Updated .