12B0001.doc

Section B - Supplies or Services and Prices

Remove non functioning Chiller

FFP

Remove and dispose of non functioning Chiller Barrel at building 20 in Orange.

FOB: Destination

PURCHASE REQUEST NUMBER: F6F9CE1348A001

SIGNAL CODE: A

NET AMT

Install new Chiller Barrel

FFP

Install new Chiller Barrel. Perform operational check.

FOB: Destination

PURCHASE REQUEST NUMBER: F6F9CE1348A001

SIGNAL CODE: A

NET AMT

Section C - Descriptions and Specifications

STATEMENT OF WORK

1.

Location

Building 20, Orange ANG Station, Boston Post Road Rd, Orange, 206 Boston Post Road Orange, CT 06477. Arrangements for entrance onto the Base must be made by contacting Base Engineering at (860) 268-4145 or (860) 306-5641 between the hours of 7:00 a.m. and 4:30 p.m., Monday through Friday.

2.

Purpose

The purpose of this statement of work is to contract the replacement of the remote evaporator currently connected to the Trane Air Cooled, Series R, Rotary Liquid Cooled, 90 ton Chiller unit currently installed at building 20.

3.

Background

A recent project, SKXJ112102, was performed to replace the Trane, 90 ton central chiller, Model number TTB0102 at Building 20. This equipment is a 2 stage cooling system that ramps up to meet temperature based upon cooling needs of the building. The installation was completed and during the final operational check out and inspection of the installed equipment it was discovered that the original remote evaporator was faulty and was causing contamination and excessive loss of the refrigerant.

4. Scope The work covered in this Statement of Objectives consists of furnishing all labor, expertise, equipment, materials, facilities, transportation, and appliances necessary to completely remove and replace the Trane remote evaporator assembly with a Trane or equivalent model that will ensure proper functioning of the 90 Ton Chiller system.

The period of performance will be 30 days from the issuance of the Notice To Proceed.

5.

Summary of Work

a) Reclaim all refrigerant in both circuits. Provide proper AF Documentation showing amount removed and replaced. The contaminated refrigerant will be properly disposed of and documented.

b) Disconnect circuit #1 & #2 hardware

c) Remove and dispose of existing chiller barrel

d) Install new barrel and reconnect circuit #1 & #2 hardware

e) Install two ball valves on each side of the filter-dryer canister

f) Replace filter-dryer and then recharge both circuits. **Note that circuit #2 will be charged with new refrigerant.

g) Leak check system and repair all chiller system leaks.

h) Conduct complete HVAC system test and calibration to manufacturers specifications.

6.

Definitions

a. “IAW” shall mean “In-accordance with”

b. “KO” shall mean “Contracting Officer”

c. “COR” shall mean “Contracting Officer’s Representative”.

7.

Codes and Standards

a. All work performed under this contract shall be in accordance with federal, state and local laws, codes, ordinances, rules, regulations, orders and other legal requirements of public authorities that bear on performance of work; and, widely accepted industry standards, including but not limited to:

Abbr. * Organization*

AASHTO

American Association of State Highway and Transportation Officials

ACI

American Concrete Institute

AGA

American Gas Association

AIA

American Institute of Architects

AIEE

American Institute of Electrical Engineers

AISC

American Institute of Steel Construction

AISI

American Iron and Steel Institute

ANSI

American National Standards Institute

ASCE

American Society of Civil Engineers

ASHRAE

American Society of Heating, Refrigeration, and Air Conditioning Engineers

ASME

American Society of Mechanical Engineers

ASTM

American Society for Testing and Material

AWI

American Woodwork Institute

AWPA

American Wood Preservers Association

AWS

American Welding Society

BIA

Brick Institute of America

BOCA

Building Official Code Administrators (Building Code)

CRSI

Concrete Reinforcing Steel Institute

CS

Commercial Standards

FAA

Federal Aviation Administration

FM

Factory Mutual System

FS

Federal Specification

NBS

National Bureau of Standards

NEC

National Electric Code

NEMA

National Electrical Manufacturers Association

NFPA

National Fire Protection Association

OSHA

Occupational Safety & Health Administration

PCA

Portland Cement Association

PCI

Precast Concrete Institute

RMA

Rubber Manufacturers Association

SDI

Steel Deck Institute

SJI

Steel Joist Institute

UBC

Uniform Building Code Standards

UL

Underwriters Laboratories

*Reference to other organizations may be included in some sections of the specifications. Many of the above referenced activities can be contacted via the Internet at www.nssn.org.

b. Various standards and specifications are incorporated in the technical sections of these specifications by reference. In all such instances, the reference shall mean the latest edition, including amendment or revision in effect as of the date of this specification, unless a specific issue is identified otherwise. Failure to comply with any of the aforementioned codes and standards shall be considered as a failure to comply with contract specifications. In the event that referenced specifications or standards contain general requirements in conflict with the general or supplementary conditions, the scope of work of individual sections of these specifications shall govern.

c. The contractor or his designated representative shall have, at all times during the construction period, a copy of the contract. The contractor shall present said contract, when asked to do so.

9.

Utilities

a. Contractors shall, if needed, coordinate lock out tag out with all local utilities.

b. Contractor shall coordinate with the Base Civil Engineer and CBYD before any excavation.

c. Contractor shall be responsible for injury to water pipes, gas pipes, oil pipes, electrical wires, conduits, drains, sewers, buildings and other structures that may be set within prosecution of the work, owned by individuals, firms, corporations or by the municipality.

10. Materials

All materials will be provided by the contractor.

11.

Base Access The contractor shall provide a list of names and their job or trade, to the Contracting Officers Representative (COR), at the Pre-Construction meeting. The Government reserves the right to deny access to any person, with no consequence to the contract.

12.

Safety

a. The Contractor shall conduct his operation in accordance with all Federal, State and Local regulations and/or standards pertinent to "Safe Practices". Base Safety personnel shall inspect the job site to insure safety standards are met. Base Safety, through the COR, shall issue warnings or stop work not in compliance. All contract workers must wear proper personal protection equipment per OSHA requirements. (i.e. ear plugs, safety goggles, welding helmet, improper Lockout Tagout)

b. These construction documents, and the joint and several phases of construction hereby contemplated are to be governed, at all times, by applicable provisions of the federal laws, including, but not limited to, the latest amendments of the following:

(1) Williams-Steiger Occupational Safety & Health Act of 1970, Public Law 91-596.

(2) Part 1510 -- Occupational Safety and Health Standards, Chapter XIII of Title 29, Code of Federal Regulations.

(3) Part 1518 -- Safety and Health Regulations for Construction, Chapter XIII of Title 29, Code of Federal Regulations, as amended to date.

c. Contractor shall not allow his employees, subcontractors, material, men or any other persons over whom he has control to enter or remain upon or allow any plant or materials to be brought or to remain upon any part of the Airport, which in the opinion of the COR would be a hazardous location. Equipment not actually in operation shall be kept clear of aircraft operating areas.

d. The Contractor will not be permitted to enter upon any area of the active landing strips unless accompanied by a representative of the Contracting Officer designated by the National Guard Bureau to escort the Contractor’s personnel and equipment to the point(s) of operations within the limits of such areas, and he shall not traverse back and forth between points within such areas unless accompanied by said representatives.

e. The Contractor shall furnish, erect, and maintain all barricades, warning signs, “rope-offs”, detours, markings and other protection for hazards. When used during periods of darkness, the protection provided shall be suitably illuminated. The Contractor shall coordinate with the COR to have a man on call 24 hours per day, with means of communication, for emergency maintenance of the hazard lighting, markings and barricades. Open-flame type lights shall not be permitted within the air operations areas of the Airport. Contractor shall place said protection prior to commencing work until their dismantling is directed by the Contracting Officer or his designated representative.

f. Radio Transmitter Restrictions. To preclude accidental actuation of sensitive electronic equipment, under no circumstances shall transmitters be used without prior approval. Cell phones greater than 4 watts, and any cell phone within the munitions compound, shall not be powered on.

g. Loading. No part of any work involved in this contract shall be loaded during construction with a load greater than the vehicle/equipment is rated. In other words, do not exceed the GVW (Gross Vehicle Weight) of your vehicles or other equipment. Should any accidents or damage occur through any violation of this requirement, the Contractor shall be held responsible under his contract and/or bond.

13. Fire Prevention and Protection

The Contractor shall comply with all fire protection measures prescribed in AFOSH 127-5, a copy of which is on file in the office of the Contracting Officer. A written fire permit shall be obtained from the Base Fire Department each day for use of open flame devices, such as blowtorches, portable furnaces, tar kettles or gas and electric welding and cutting equipment. The Contractor shall be liable for any fire loss to Government property attributable to negligence on his part of the Contractor, including failure to comply with fire prevention measures prescribed by terms of this contract.

14. Emergencies

Should tornado, hurricane, gale or heavy wind warnings be issued, take every practicable precaution to minimize danger to persons, to the work and to the adjacent property. Any damage caused by a failure to take every practicable precaution, shall be rectified or replaced to the complete satisfaction of the Contracting Officer and at no expense to the Owner. Injury to personnel, or damage to adjacent property because of the work shall be the complete responsibility of the Contractor, and he accepts exclusive liability for the same. Precautions shall include, but not be limited to, closing all openings, removing all loose materials, tools and equipment from exposed locations, and removing or securing scaffolding and other temporary work.

15. Clean Up

Clean-up and remove debris generated by this contract to an approved off-base location. Debris shall be trucked off site in an enclosed truck to prevent accidental loss of debris. Two (2) copies of the receiving (tipping or dumping) tickets, with a cover letter from the Prime Contractor stating the full name and address of the location to which debris was taken. Contractor shall keep work area clean at the end of each working day and clean-up entire locations at the completion of contract.

16. Government Resources

No Government resources shall be made available to the contractor beyond the use of restrooms and drinking water for contractor personnel, unless otherwise stated in this Statement of Work. The contractor shall provide for all necessary resources to provide a complete and usable facility or systems as described in the contract documents. The contractor shall not obligate Government resources in any manner. The Government shall seek remedy for any obligation or encumbrance imposed by the contractor’s actions. Government resources include, but are not limited to, government owned materials, equipment, tools, vehicles, personnel and facilities. Contractor shall provide all material handling equipment, properly sized to move all equipment to accomplish the work.

a. Use of the site. Confine operations at the site to the areas permitted under the Contract. Portions of the site beyond areas on which work is indicated are not to be disturbed. Conform to site rules and regulations affecting the work while engaged in project construction.

(1) Keep existing driveways and entrances serving the premises clear and available to the Owner and his employees at all times. Do not use these areas for parking or storage of materials.

(2) Do not unreasonably encumber the site with materials or equipment. Confine stockpiling of materials and location of storage sheds to the areas indicated. If additional storage is necessary, obtain and pay for such storage off-site.

(3) Lock automotive type vehicles, such as passenger cars and trucks, and other mechanized and motorized construction equipment when parked and unattended, so as to prevent unauthorized use. Do not leave such vehicles or equipment unattended with the motor running or the ignition key in place.

b. Use of the Existing Buildings: Maintain the existing buildings in a safe and weather tight condition throughout the construction period. Repair damage caused by construction operations. Take all precautions necessary to protect the building and its occupants during the construction period.

(1) Keep public areas, such as hallways, vestibules and toilet rooms free from accumulation of waste material, rubbish or construction debris.

(2) Smoking or open fires will not be permitted within the building enclosure or on the premises.

(3) If contractor discovers existing damage, written notice with photographs must be given before any work is started in the area.

(4) Storage is the Contractor’s responsibility. The Government shall not provide any facility, or space within a facility, for storage of materials and equipment.

17. Government Occupancy

The government will occupy the site and the existing buildings during the entire period of construction. Coordinate with the COR and cooperate fully with the occupant(s) during construction operations to minimize conflicts and to facilitate government usage. Perform the work so as not to interfere with the government’s operations. Immediately report any issues/conflicts to the Contracting Officer or COR.

18. Work Schedule

Contractor shall submit for review and approval all work schedules with the Contracting Officer or his representative prior to beginning any work. Any deviations are to be submitted, in writing, to the Contracting Officer or his representative for approval.

a. Delays: Unavoidable minor delays during construction caused by essential defense activities (alerts, security checks, fire suppression practices, terrorist alerts, etc.) may occur due to mission requirements. These occur at the rate of about four (4) hours per month during the work day.

b. Construct work in stages to accommodate the Government’s use of the premises during the construction period.

c. Coordinate the construction schedule and operations with all other Contractors and Subcontractors performing work on the project. There may be a contractor installing new communications (fiber-optic cable) in this area.

d. No work shall be done other than during normal 8-hour, 5-day workweek without 48 hours advance notice to the Contracting Officer.

e. Overtime work for cement finishing must be anticipated by Contractor and shall be included in his contract price.

19. Occupied Buildings.

The Contractor will be working in and around existing buildings which are occupied. Do not enter the buildings without prior approval of the Contracting Officer or his representative. Leave fixed equipment in place and protect against damage or temporarily disconnect, relocate, protect, and reinstall at completion of work. The Government will remove and relocate other Government property in the areas of the buildings scheduled to receive work.

20. References

ANG ETL 01-1-1

All applicable Local, State and federal building codes.

21. Attachments

1. Contractor Hazardous Material Identification Form

2. Contractor Hazardous Material Identification Form Close-Out Procedures

ATTACHMENT 1

Contractor Hazardous Material Identification Form

Part I Date: _______________

This part is to be completed by Contractor prior to the construction start date, and shall be maintained on the job site.

Contractor Company:

Proposed work term:

____________ to ______________

Contractor Point of Contact:

(full name or names, phone/pager numbers, emergency 24 hour contact number, etc.)

HM to be used:

M.S.D.S.

Quantity Disposal Procedures Used/Unused material removed

MFG./Product Attached used from ANG installation

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

Note: This form is good for a one-month period and is to be submitted to the Hazardous Material Pharmacy. All Hazardous Material used thereafter will be identified to the Contracting Officer's Representative for approval by the Hazardous Material Pharmacy. See Part II for Contractor close-out procedures. The Hazardous Material Pharmacy phone number is (860) 292-2823.

Approval Signatures:

COR (Contracting Officer Representative)

BEER (Bio-Environmental Engineering Representative)

EM (Environmental Manager)

SO (Safety Officer)

ATTACHMENT 2

Contractor Hazardous Material Identification Form

Close-Out Procedures

Part II Date: _______________

Attach this form to Part I

The Contractor shall accompany the Contracting Officer Representative and Environmental Manager on the close-out inspection to ensure all used/unused HM was removed from the installation.

Close out Approval Signatures:

COR (Contracting Officer Representative)

BEER (Bio-Environmental Engineering Representative)

EM (Environmental Manager)

Contractor Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

Section F - Deliveries or Performance

DELIVERY INFORMATION

100 NICHOLSON ROAD BRADLEY ANGB BLDG 2

EAST GRANBY CT 06026

860.292.2397

FOB: Destination

F6F9CE

FOB: Destination

F6F9CE

CLAUSES INCORPORATED BY REFERENCE

SCA WAGE DETERMINATION

WD 05-2087 (Rev.-14) was first posted on www.wdol.gov on 06/17/2011

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2087

Diane C. Koplewski Division of | Revision No.: 14

Director Wage Determinations| Date Of Revision: 06/13/2011

Applicable for HARTFORD STANDARD METROPOLITAN STATISTICAL AREA ONLY in the state of Connecticut as follows:

HARTFORD COUNTY - Avon Town, Bloomfield Town, Canton Town, East Granby Town, East Hartford Town, East Windsor Town, Enfield Town, Farmington Town, Glastonbury Town, Granby Town, Hartford City, Manchester Town, Marlborough

Town, Newington Town, Rocky Hill Town, Simsbury Town, South Windsor Town, Suffield Town, West Hartford Town, Wethersfield Town, Windsor Town, Windsor

Locks Town

LITCHFIELD COUNTY - New Hartford Town

MIDDLESEX COUNTY - Cromwell Town, East Hampton Town, Portland Town

NEW LONDON COUNTY - Colchester Town

TOLLAND COUNTY - Andover City, Bolton Coty, Columbia Town, Coventry City, Ellington City, Hebron Town, Stafford Town, Tolland Town, Vernon City, Willington Town

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I 16.48

01012 - Accounting Clerk II 18.48

01013 - Accounting Clerk III 20.70

01020 - Administrative Assistant 29.92

01040 - Court Reporter 18.41

01051 - Data Entry Operator I 15.62

01052 - Data Entry Operator II 17.16

01060 - Dispatcher, Motor Vehicle 18.33

01070 - Document Preparation Clerk 14.41

01090 - Duplicating Machine Operator 14.41

01111 - General Clerk I 16.86

01112 - General Clerk II 18.39

01113 - General Clerk III 20.64

01120 - Housing Referral Assistant 24.22

01141 - Messenger Courier 15.37

01191 - Order Clerk I 15.42

01192 - Order Clerk II 16.83

01261 - Personnel Assistant (Employment) I 17.77

01262 - Personnel Assistant (Employment) II 19.88

01263 - Personnel Assistant (Employment) III 24.37

01270 - Production Control Clerk 24.62

01280 - Receptionist 14.28

01290 - Rental Clerk 16.43

01300 - Scheduler, Maintenance 19.41

01311 - Secretary I 19.42

01312 - Secretary II 21.73

01313 - Secretary III 24.22

01320 - Service Order Dispatcher 19.42

01410 - Supply Technician 29.92

01420 - Survey Worker 18.76

01531 - Travel Clerk I 13.52

01532 - Travel Clerk II 14.74

01533 - Travel Clerk III 16.03

01611 - Word Processor I 15.62

01612 - Word Processor II 17.53

01613 - Word Processor III 19.62

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass 21.40

05010 - Automotive Electrician 21.13

05040 - Automotive Glass Installer 20.86

05070 - Automotive Worker 20.21

05110 - Mobile Equipment Servicer 18.56

05130 - Motor Equipment Metal Mechanic 21.40

05160 - Motor Equipment Metal Worker 20.21

05190 - Motor Vehicle Mechanic 21.40

05220 - Motor Vehicle Mechanic Helper 17.69

05250 - Motor Vehicle Upholstery Worker 19.40

05280 - Motor Vehicle Wrecker 20.21

05310 - Painter, Automotive 21.15

05340 - Radiator Repair Specialist 20.21

05370 - Tire Repairer 15.68

05400 - Transmission Repair Specialist 21.40

07000 - Food Preparation And Service Occupations

07010 - Baker 14.94

07041 - Cook I 14.28

07042 - Cook II 15.54

07070 - Dishwasher 11.11

07130 - Food Service Worker 11.14

07210 - Meat Cutter 19.53

07260 - Waiter/Waitress 11.54

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 18.43

09040 - Furniture Handler 13.89

09080 - Furniture Refinisher 18.43

09090 - Furniture Refinisher Helper 15.47

09110 - Furniture Repairer, Minor 16.97

09130 - Upholsterer 19.11

11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 11.34

11060 - Elevator Operator 12.12

11090 - Gardener 17.12

11122 - Housekeeping Aide 13.33

11150 - Janitor 14.48

11210 - Laborer, Grounds Maintenance 14.43

11240 - Maid or Houseman 12.28

11260 - Pruner 12.98

11270 - Tractor Operator 16.33

11330 - Trail Maintenance Worker 14.43

11360 - Window Cleaner 14.62

12000 - Health Occupations

12010 - Ambulance Driver 19.33

12011 - Breath Alcohol Technician 21.91

12012 - Certified Occupational Therapist Assistant 23.63

12015 - Certified Physical Therapist Assistant 25.26

12020 - Dental Assistant 18.78

12025 - Dental Hygienist 33.86

12030 - EKG Technician 22.98

12035 - Electroneurodiagnostic Technologist 22.98

12040 - Emergency Medical Technician 19.33

12071 - Licensed Practical Nurse I 20.30

12072 - Licensed Practical Nurse II 22.71

12073 - Licensed Practical Nurse III 25.31

12100 - Medical Assistant 16.12

12130 - Medical Laboratory Technician 20.59

12160 - Medical Record Clerk 17.44

12190 - Medical Record Technician 19.49

12195 - Medical Transcriptionist 16.91

12210 - Nuclear Medicine Technologist 34.94

12221 - Nursing Assistant I 12.00

12222 - Nursing Assistant II 13.50

12223 - Nursing Assistant III 14.73

12224 - Nursing Assistant IV 16.53

12235 - Optical Dispenser 23.64

12236 - Optical Technician 17.82

12250 - Pharmacy Technician 15.93

12280 - Phlebotomist 16.53

12305 - Radiologic Technologist 29.22

12311 - Registered Nurse I 27.82

12312 - Registered Nurse II 34.04

12313 - Registered Nurse II, Specialist 34.04

12314 - Registered Nurse III 41.18

12315 - Registered Nurse III, Anesthetist 41.18

12316 - Registered Nurse IV 49.36

12317 - Scheduler (Drug and Alcohol Testing) 24.15

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 20.58

13012 - Exhibits Specialist II 25.48

13013 - Exhibits Specialist III 31.18

13041 - Illustrator I 22.34

13042 - Illustrator II 27.66

13043 - Illustrator III 33.85

13047 - Librarian 28.78

13050 - Library Aide/Clerk 12.85

13054 - Library Information Technology Systems 25.98

Administrator

13058 - Library Technician 17.48

13061 - Media Specialist I 18.75

13062 - Media Specialist II 20.98

13063 - Media Specialist III 23.38

13071 - Photographer I 19.17

13072 - Photographer II 22.01

13073 - Photographer III 26.63

13074 - Photographer IV 32.48

13075 - Photographer V 39.41

13110 - Video Teleconference Technician 18.75

14000 - Information Technology Occupations

14041 - Computer Operator I 18.10

14042 - Computer Operator II 20.44

14043 - Computer Operator III 23.13

14044 - Computer Operator IV 25.31

14045 - Computer Operator V 28.04

14071 - Computer Programmer I (see 1) 23.65

14072 - Computer Programmer II (see 1)

14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1)

14102 - Computer Systems Analyst II (see 1)

14103 - Computer Systems Analyst III (see 1)

14150 - Peripheral Equipment Operator 18.10

14160 - Personal Computer Support Technician 25.31

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated) 33.19

15020 - Aircrew Training Devices Instructor (Rated) 40.16

15030 - Air Crew Training Devices Instructor (Pilot) 48.13

15050 - Computer Based Training Specialist / Instructor 30.22

15060 - Educational Technologist 32.49

15070 - Flight Instructor (Pilot) 48.13

15080 - Graphic Artist 23.64

15090 - Technical Instructor 23.23

15095 - Technical Instructor/Course Developer 28.43

15110 - Test Proctor 19.69

15120 - Tutor 19.69

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler 10.30

16030 - Counter Attendant 10.30

16040 - Dry Cleaner 13.14

16070 - Finisher, Flatwork, Machine 10.30

16090 - Presser, Hand 10.30

16110 - Presser, Machine, Drycleaning 10.30

16130 - Presser, Machine, Shirts 10.30

16160 - Presser, Machine, Wearing Apparel, Laundry 10.30

16190 - Sewing Machine Operator 14.34

16220 - Tailor 15.48

16250 - Washer, Machine 11.21

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 21.78

19040 - Tool And Die Maker 25.34

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 16.36

21030 - Material Coordinator 22.51

21040 - Material Expediter 22.51

21050 - Material Handling Laborer 13.94

21071 - Order Filler 14.22

21080 - Production Line Worker (Food Processing) 16.36

21110 - Shipping Packer 15.87

21130 - Shipping/Receiving Clerk 15.87

21140 - Store Worker I 13.41

21150 - Stock Clerk 17.93

21210 - Tools And Parts Attendant 16.36

21410 - Warehouse Specialist 16.36

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 24.85

23021 - Aircraft Mechanic I 23.69

23022 - Aircraft Mechanic II 24.85

23023 - Aircraft Mechanic III 26.09

23040 - Aircraft Mechanic Helper 19.11

23050 - Aircraft, Painter 23.09

23060 - Aircraft Servicer 20.95

23080 - Aircraft Worker 21.83

23110 - Appliance Mechanic 22.98

23120 - Bicycle Repairer 15.68

23125 - Cable Splicer 30.83

23130 - Carpenter, Maintenance 23.44

23140 - Carpet Layer 22.02

23160 - Electrician, Maintenance 26.01

23181 - Electronics Technician Maintenance I 23.88

23182 - Electronics Technician Maintenance II 24.92

23183 - Electronics Technician Maintenance III 25.95

23260 - Fabric Worker 21.16

23290 - Fire Alarm System Mechanic 22.93

23310 - Fire Extinguisher Repairer 20.24

23311 - Fuel Distribution System Mechanic 28.46

23312 - Fuel Distribution System Operator 24.06

23370 - General Maintenance Worker 19.82

23380 - Ground Support Equipment Mechanic 23.69

23381 - Ground Support Equipment Servicer 20.95

23382 - Ground Support Equipment Worker 21.83

23391 - Gunsmith I 20.24

23392 - Gunsmith II 22.02

23393 - Gunsmith III 23.93

23410 - Heating, Ventilation And Air-Conditioning 23.58

Mechanic

23411 - Heating, Ventilation And Air Contditioning 24.42

Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 23.04

23440 - Heavy Equipment Operator 25.19

23460 - Instrument Mechanic 23.22

23465 - Laboratory/Shelter Mechanic 22.98

23470 - Laborer 13.56

23510 - Locksmith 23.17

23530 - Machinery Maintenance Mechanic 22.27

23550 - Machinist, Maintenance 21.11

23580 - Maintenance Trades Helper 18.72

23591 - Metrology Technician I 23.22

23592 - Metrology Technician II 24.05

23593 - Metrology Technician III 25.02

23640 - Millwright 22.49

23710 - Office Appliance Repairer 24.11

23760 - Painter, Maintenance 22.30

23790 - Pipefitter, Maintenance 28.15

23810 - Plumber, Maintenance 26.57

23820 - Pneudraulic Systems Mechanic 23.93

23850 - Rigger 23.93

23870 - Scale Mechanic 22.02

23890 - Sheet-Metal Worker, Maintenance 25.58

23910 - Small Engine Mechanic 19.45

23931 - Telecommunications Mechanic I 25.66

23932 - Telecommunications Mechanic II 26.57

23950 - Telephone Lineman 24.24

23960 - Welder, Combination, Maintenance 21.54

23965 - Well Driller 23.22

23970 - Woodcraft Worker 23.93

23980 - Woodworker 18.67

24000 - Personal Needs Occupations

24570 - Child Care Attendant 14.25

24580 - Child Care Center Clerk 19.47

24610 - Chore Aide 10.73

24620 - Family Readiness And Support Services 20.65

Coordinator

24630 - Homemaker 23.11

25000 - Plant And System Operations Occupations

25010 - Boiler Tender 27.09

25040 - Sewage Plant Operator 24.49

25070 - Stationary Engineer 27.09

25190 - Ventilation Equipment Tender 21.78

25210 - Water Treatment Plant Operator 24.49

27000 - Protective Service Occupations

27004 - Alarm Monitor 20.90

27007 - Baggage Inspector 13.99

27008 - Corrections Officer 27.33

27010 - Court Security Officer 27.33

27030 - Detection Dog Handler 19.25

27040 - Detention Officer 27.33

27070 - Firefighter 27.14

27101 - Guard I 13.99

27102 - Guard II 19.25

27131 - Police Officer I 27.52

27132 - Police Officer II 30.58

28000 - Recreation Occupations

28041 - Carnival Equipment Operator 13.10

28042 - Carnival Equipment Repairer 13.74

28043 - Carnival Equpment Worker 11.09

28210 - Gate Attendant/Gate Tender 16.95

28310 - Lifeguard 15.10

28350 - Park Attendant (Aide) 18.97

28510 - Recreation Aide/Health Facility Attendant 13.84

28515 - Recreation Specialist 20.49

28630 - Sports Official 15.10

28690 - Swimming Pool Operator 17.45

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer 31.15

29020 - Hatch Tender 31.15

29030 - Line Handler 31.15

29041 - Stevedore I 29.93

29042 - Stevedore II 32.49

30000 - Technical Occupations

30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 39.43

30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 27.18

30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 29.94

30021 - Archeological Technician I 18.32

30022 - Archeological Technician II 20.49

30023 - Archeological Technician III 25.41

30030 - Cartographic Technician 25.37

30040 - Civil Engineering Technician 31.76

30061 - Drafter/CAD Operator I 18.32

30062 - Drafter/CAD Operator II 20.49

30063 - Drafter/CAD Operator III 22.83

30064 - Drafter/CAD Operator IV 28.11

30081 - Engineering Technician I 16.21

30082 - Engineering Technician II 18.50

30083 - Engineering Technician III 20.82

30084 - Engineering Technician IV 25.79

30085 - Engineering Technician V 33.14

30086 - Engineering Technician VI 38.16

30090 - Environmental Technician 21.21

30210 - Laboratory Technician 20.03

30240 - Mathematical Technician 25.37

30361 - Paralegal/Legal Assistant I 20.67

30362 - Paralegal/Legal Assistant II 25.60

30363 - Paralegal/Legal Assistant III 31.32

30364 - Paralegal/Legal Assistant IV 37.90

30390 - Photo-Optics Technician 25.37

30461 - Technical Writer I 22.64

30462 - Technical Writer II 27.70

30463 - Technical Writer III 33.51

30491 - Unexploded Ordnance (UXO) Technician I 25.06

30492 - Unexploded Ordnance (UXO) Technician II 30.32

30493 - Unexploded Ordnance (UXO) Technician III 36.34

30494 - Unexploded (UXO) Safety Escort 25.06

30495 - Unexploded (UXO) Sweep Personnel 25.06

30620 - Weather Observer, Combined Upper Air Or (see 2) 22.83

Surface Programs

30621 - Weather Observer, Senior (see 2) 25.37

31000 - Transportation/Mobile Equipment Operation Occupations

31020 - Bus Aide 11.63

31030 - Bus Driver 16.97

31043 - Driver Courier 15.70

31260 - Parking and Lot Attendant 10.64

31290 - Shuttle Bus Driver 16.47

31310 - Taxi Driver 15.47

31361 - Truckdriver, Light 16.47

31362 - Truckdriver, Medium 20.26

31363 - Truckdriver, Heavy 22.21

31364 - Truckdriver, Tractor-Trailer 22.21

99000 - Miscellaneous Occupations

99030 - Cashier 10.14

99050 - Desk Clerk 11.13

99095 - Embalmer 27.92

99251 - Laboratory Animal Caretaker I 11.25

99252 - Laboratory Animal Caretaker II 11.83

99310 - Mortician 37.63

99410 - Pest Controller 15.45

99510 - Photofinishing Worker 13.73

99710 - Recycling Laborer 17.51

99711 - Recycling Specialist 19.23

99730 - Refuse Collector 15.76

99810 - Sales Clerk 16.37

99820 - School Crossing Guard 13.95

99830 - Survey Party Chief 22.39

99831 - Surveying Aide 12.35

99832 - Surveying Technician 20.35

99840 - Vending Machine Attendant 14.42

99841 - Vending Machine Repairer 16.49

99842 - Vending Machine Repairer Helper 14.42

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $3.59 per hour or $143.60 per week or $622.27 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 5 years, 4 weeks after 15 years, and 5 weeks after 25 years.

Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin

Luther King Jr's Birthday, Washington's Birthday, Good Friday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and

Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.)

(See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds

$27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime

(i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

HAZARDOUS PAY DIFFERENTIAL: An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordinance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives.

Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving regrading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used.

All operations involving, unloading, storage, and hauling of ordance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract

(either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

The duties of employees under job titles listed are those described in the

"Service Contract Act Directory of Occupations", Fifth Edition, April 2006, unless otherwise indicated. Copies of the Directory are available on the Internet. A links to the Directory may be found on the WHD home page at http://www.dol.

gov/esa/whd/ or through the Wage Determinations On-Line (WDOL) Web site at http://wdol.gov/.

REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE {Standard Form

1444 (SF 1444)}

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined. Such conforming process shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees. The conformed classification, wage rate, and/or fringe benefits shall be retroactive to the commencement date of the contract. {See Section 4.6 (C)(vi)}

When multiple wage determinations are included in a contract, a separate SF 1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, for review. (See section 4.6(b)(2) of Regulations 29 CFR Part 4).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour decision to the contractor.

6) The contractor informs the affected employees.

Information required by the Regulations must be submitted on SF 1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of

Occupations" (the Directory) should be used to compare job definitions to insure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination.

Section G - Contract Administration Data

Section I - Contract Clauses

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (APR 2009)

(a) Definitions. As used in this clause--

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is ``not dominant in its field of operation'' when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity.

(b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall rerepresent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts--

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code assigned to this contract. The small business size standard corresponding to this NAICS code can be found at http://www.sba.gov/services/contractingopportunities/sizestandardstopics/.

(d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the rerepresentation required by paragraph (b) of this clause by validating or updating all its representations in the Online Representations and Certifications Application and its data in the Central Contractor Registration, as necessary, to ensure that they reflect the Contractor's current status.