A21_Amendment__W91QVN-17-T-0072-0002.pdf

411TH CSB, KOREA - CONST & SUPPLY TEAM

POC: MS. YIM, MI HYE

TEL: 02-7914-6263

MIHYE.YIM2.LN@MAIL.MIL

APO AP 96205-5289

UNITED STATES OF AMERICA (THE)

0010995552

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

A. The purpose of this Amendment is below :

1. To add 'meets Consumer Product Safety Commission (CPSC) 1633 Standards-the burn test for the complete mattresses' in paragraph 1)

Top quilting and 4) Border, Salient Characteristics.

2. To add Mattress size, Width: Queen- Min 1,520mm ~ Max 1,524mm , Single- Min 960mm ~ Max 990.6mm, Length: Min 2030mm ~ Max

2032mm, Height: Min 228.6mm ~ Max 240mm

3. The closing date is extended to 28 April 2017, 13:00 pm (Korean Standard time).

B. All other Conditions and Terms remain the same.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 25-Apr-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W91QVN-17-T-0072

X 9B. DATED (SEE ITEM 11)

18-Apr-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

25-Apr-2017

CODE

411TH CONTRACTING SUPPORT BRIGADE, KOREA

RCC YONGSAN, UNIT #15289

APO AP 96205-5289

UNITED STATES OF AMERICA (THE)

W91QVN 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE W91QVN

FACILITY CODECODE

EMAIL:TEL:

W91QVN-17-T-0072

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 25-Apr-2017 01:00 PM to 28-Apr-2017 01:00 PM.

The following have been modified:

SALIENT CHARACTERISTICS

• Queen Size Mattress:

Size: 60"W x 80"L x 9-1/2"H

Width: Min 1520mm ~ Max 1524mm

Length: Min 2030mm ~ Max 2032mm

Height: Min 228.6mm ~ Max 240mm

Quantity of spring: 21 x 19 = 399 pcs

Color: Ivory

• Single Mattress:

Size: 38"W x 80"L x 9-1/2"H

Width: Min 960mm ~ Max 990.6mm

Length: Min 2030mm ~ Max 2032mm

Height: Min 228.6mm ~ Max 240mm

Quantity of spring: 13 x 19 = 247 pcs

Color: Ivory

1) Top quilting

Jacquard fabric: 100% polyester

Weight: Minimum 90" /1 Meter - 610g

(Strong in tensile strength and suture retention strength)

Fire retardant

(Certificate from Korea Equipment inspection Corporation or

Meets CPSC1633 Standards-burn test for the complete mattress)

Padding (8oz x 1): 100% Polyester

Antibacterial process

Form (10mm x 2): Solidity: under 5 kg/314 cm²

Compression strain rate: under 5%

Density: Minimum 19kg/m²

Nonwoven fabric Density: Minimum 40g/m²

2) Contents for top of mattress

Power Tex (1 sheet): Compression processed polyester

Weight: Minimum 700g/ m²

Guard tex (1 sheet): Compression processed polyester

Weight: Minimum 700g/ m²

Prevent damage of mattress by spring

3) Spring plate

Bornel spring: Thickness: 2.50mm (Acceptable level ± 0.05mm)

Tensile strength: 1,500 ~ 1,720 N/mm²

Carbon content: 0.64 ~ 0.71 % (high carbon spring) Top and bottom diameter: 79 - 81mm

Middle diameter: 45-47 mm

Height: 150 mm (Acceptable level ± 5mm)

6 coil spirals

Shrinkage rate after punch test: under 20mm

Edge wire: Corner of mattress for edge strengthen (4pcs)

Border wire: Thickness: 5mm (Acceptable level ± 0.5mm)

Assemble by 0.90 mm rolling steel clip

Edge spring: Prevent any sagging of mattress

Thickness: 3.10mm (Acceptable level ±0 .05mm)

Tensile strength: 1,569-1,667 N/mm²

Carbon content: 0.74 - 0.81 %( High carbon spring)

8-10 pcs

Helical coil spring: Thickness: 1.40 mm (Acceptable level ±0 .05mm)

Carbon content: 0.64-0.71 % (high carbon spring)

4) Border

Guard tex (1 sheet): Compression processed polyester

Weight: Minimum 700g/m²

Prevent damage of mattress by spring

Jacquard fabric: 100% polyester

Weight: Minimum 90" (W)/1 Meter (L) - 610g

(Strong in tensile strength and suture retention strength)

Fire retardant

(Certificate from Korea Equipment inspection Corporation or

Meets CPSC1633 Standards-burn test for the complete mattress)

Sponge (10mm x 1): Density: Minimum 15kg/m²

Nonwoven fabric: Density: Minimum 40g/m²

Air vent (4 pcs): Install air vents on the side of mattress for prevention of humidity and rust.

5) Contents for bottom of mattress

Guard Tex (1 sheet) Compression processed polyester

Weight: Minimum 1,000g/m²

Prevent damage of mattress by spring

Power Tex (1 sheet) Compress ion processed polyester

Weight: Minimum 700g/m²

6) Bottom quilting

Nonwoven fabric: Density: Minimum 40g/m²

Form (10mm x 2): Solidity: under 5 kg/314 cm²

Compression strain rate: under 5%

Density: Minimum 19kg/m²

Padding (8oz x 1): 100% Polyester

Antibacterial process

Jacquard fabric: 100% polyester

Weight: 90"/1 Meter -610g

(Strong in tensile strength and suture retention strength)

Fire retardant

(Certificate from Korea Equipment inspection Corporation or

Meets CPSC1633 Standards-burn test for the complete mattress)

7) Completion and packaging

Seal: Minimum 35mm cotton tape

Packaging: Automatic plastic packaging

(End of Summary of Changes)